Vogel's TVM3445W, TVM3445B, TVM3645W, TVM3625B, TVM3645B Installation Guide for TVM3445B

TVM 3420 Series
TVM 3440 Series
TVM 3620 Series
TVM 3640 Series

Full Installation Guide

TVM 3420/3440/3640 Series English

1

Everything you need to get your TV safely on the wall, in no timeBefore you start

…we just wanted to say thanks for choosing Vogel’s. Smart choice.

And you’re already making another smart choice – reading the manual! Keep reading to learn all about safe, efficient

installation, and how to use your new mount.

Stay safe

TVM 3420/3440/3640 Series English

2

Warning

Always read these safety instructions carefully before installing and using this product.

Following these instructions is strictly required. Incorrect mounting and/or installation could put you, your TV, and
your family at substantial risk.

Don’t dare risk it… Read all

Vogel’s recommends that the mounting and/or installation of this product should be carried out by a
suitably qualified expert.

Vogel’s cannot be held responsible for any injury and/or damage caused by incorrect installation.

Please consult the manual for your TV and ensure that the weight and size of the TV is within the maximum
weight and size limits specified for this product, and that the TV mounting bolts used are of a suitable
length and diameter. Note that not all the TV mounting accessories provided are required for the
installation of any one TV.

The wall mounting accessories provided are exclusively intended for installation on walls made of solid
brick, solid concrete or solid wood columns.

Any material covering the wall must not exceed 3 mm/ 0.12 inch.

For mounting on walls made of other materials, such as hollow bricks, wood panels or plasterboard,
please consult your installer and/or specialist supplier.

Clean the product with a dry, lint-free cloth. Do not use detergents or other solvents to clean the product.

Only qualified, certified personnel may repair the product. Use only original spare parts. The use of other
parts will result in voiding the warranty, and could lead to injuries.

Alterations to the product and technical modifications are not permitted. This will void the warranty, and
could lead to injuries.

Always store the product in a dry and safe place with a temperature between -10°C to +50°C.

Handle and transport the product with care.

Repack the product when transporting or not using it for a longer period of time.

Lifting your TV is a two-person job. Don’t be bold!

What’s in your box?

TVM 3420/3440/3640 Series English

3

A. Wall mount

B. Interface bars

C. Interface strips

D. Safety instructions

E. Bolts for fastening strips on TV (see contents below)

F. Spacers

Something missing? Make sure your packaging has everything in place:

A. Wall mount

B. Interface bars

C. Interface strips

D. Safety instructions

E. Bolts for fastening strips on TV (see contents below)

G. Washers Ø 18 mm

H. Screws

I. Plugs (fischer© DuoPower)

J. Washers Ø 22 mm

K. Covers

L. Protective TV patches

F. Spacers

G. Washers Ø 18 mm

Contents of the TV fasteners kit:

4x M6*12mm bolts

4x M6*25mm bolts

4x M6*35mm bolts

4x M8*12mm bolts

4x M8*25mm bolts

4x M8*45mm bolts

M. Cable clips

N. Cable clip for wall plate

O. Spirit level

P. Thumbnut

4x M6 washer

4x spacer 10mm

4x spacer 5mm

You don't need all fasteners to mount your TV. Store the rest for later or other use!

TVM 3420/3440/3640 Series English

4

Got your tools ready?

Don’t start without all the necessary tools:

Crosshead screwdriver

Drilling machine

10 mm or 25/64” concrete/brick drill (for concrete/brick walls only)

5 mm or 13/64” concrete/brick drill (for concrete/brick walls only)

5 mm or 13/64” wood drill (for wooden walls only)

Stud finder (optional)

Socket wrench no. 13

Pencil

M4 (4mm) Allen key

Take care of your safety

Who cares about looking cool? Always wear personal protective equipment:

Eye protection

Ear protection

Safety shoes

Ready… set… get installing!

TVM 3420/3440/3640 Series English

5

Step 1: Attach the strips to the TV

1. Carefully place the TV face down, on a clean surface without any obstacles.

2. Fix the protective TV patches Ⓛ onto the interface strips Ⓒ. Screw the interface strips Ⓒ onto the TV with the bolts Ⓔ.
Make sure the interface strips Ⓒ are at the same height and do not stick out.

Are you missing any bolts? Or need different ones? The friendly team at Vogel’s Consumer Care are waiting to help:
vogels.com/contact

Make sure bolts and spacers are positioned correctly.

Refer to the user manual of your TV for the correct mounting material.

TVM 3420/3440/3640 Series English

6

3. Loosen the pre-attached bolts Ⓒ with the allen key Ⓞ.

4. Remove both thumbnuts Ⓟ from the interface bars Ⓑ.

5. Slide the lower interface bar Ⓑ through the designated spacing of the interface strip Ⓒ. Make sure the interface bar Ⓑ
is placed in a centered position. Notice the holes on the side of this interface bar Ⓑ. They need to face downwards.

6. Slide the upper interface bar Ⓑ through the designated spacing of the interface strip Ⓒ. Make sure this interface bar Ⓑ
is also placed in a centered position.

7. Attach both interface bars Ⓑ to the strips by tightening the pre-attached bolts Ⓒ with the allen key Ⓞ.

8. Screw the thumbnut Ⓟ into the upper bar. Make sure you don’t screw it in completely, yet.