Vodafone 1605, VPA Compact III User Manual

Pocket

User Manual

2 |

Please Read Before Proceeding

THIS DEVICE IS NOT CHARGED WHEN YOU TAKE IT OUT OF THE BOX.

DO NOT REMOVE THE BATTERY PACK WHEN THE DEVICE IS CHARGING.

YOUR WARRANTY IS INVALIDATED IF YOU OPEN OR TAMPER WITH THE DEVICE’S OUTER CASING.

PRIVACY RESTRICTIONS

Some countries require full disclosure of recorded telephone conversations, and stipulate that you must inform the person with whom you are speaking that the conversation is being recorded. Always obey the relevant laws and regulations of your country when using the recording feature of your Pocket PC Phone.

Microsoft, MS-DOS, Windows, Windows NT, Windows Server, Windows Mobile, ActiveSync, Excel, Internet Explorer, Outlook, PowerPoint, and Word are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Important Health Information and Safety Precautions

When using this product, the safety precautions below must be taken to avoid possible legal liabilities and damages.

Retain and follow all product safety and operating instructions. Observe all warnings in the operating instructions on the product.

To reduce the risk of bodily injury, electric shock, fire, and damage to the equipment, observe the following precautions.

ELECTRICAL SAFETY

This product is intended for use when supplied with power from the designated battery or power supply unit. Other usage may be dangerous and will invalidate any approval given to this product.

SAFETY PRECAUTIONS FOR PROPER GROUNDING AND CONNECTION

| 3

CAUTION: Improper grounding when connecting the product to an associated equipment can result in a risk of electric shock.

This product is equipped with a USB cable for connecting the product to a desktop or notebook computer. Be sure your computer is properly grounded (earthed) before connecting the product to the computer. The power supply cord of a desktop or notebook computer has an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet which is properly installed and grounded in accordance with all local codes and ordinances.

SAFETY PRECAUTIONS FOR POWER SUPPLY UNIT

• Use the correct external power source

A product should be operated only from the type of power source indicated on the electrical ratings label. If you are not sure of the type of power source required, consult your authorized service provider or local power company. For a product that operates from battery power or other sources, refer to the operating instructions that are included with the product.

• Handle battery packs carefully

This product contains a Li-ion Polymer battery. There is a risk of ﬁre and burns if the battery pack is handled improperly. Do not attempt to open or service the battery pack. Do not disassemble, crush, puncture, short external contacts or circuits, dispose of in ﬁre or water, or expose a battery pack to temperatures higher than 60˚C (140˚F).

WARNING: DANGER OF EXPLOSION IF BATTERY IS

INCORRECTLY REPLACED. TO REDUCE RISK OF FIRE OR BURNS, DO NOT DISASSEMBLE, CRUSH, PUNCTURE, SHORT EXTERNAL CONTACTS, EXPOSE TO TEMPERATURE ABOVE 60˚C (140˚F), OR DISPOSE OF IN FIRE OR WATER. REPLACE ONLY WITH SPECIFIED BATTERIES. RECYCLE OR DISPOSE OF USED BATTERIES ACCORDING TO THE LOCAL REGULATIONS OR REFERENCE GUIDE SUPPLIED WITH YOUR PRODUCT.

4 |

SAFETY PRECAUTIONS FOR DIRECT SUNLIGHT

Keep this product away from excessive moisture and extreme temperatures. Do not leave the product or its battery inside a vehicle or in places where the temperature may exceed 60°C (140°F), such as on a car dashboard, window sill, or behind a glass that is exposed to direct sunlight or strong ultraviolet light for extended periods of time. This may damage the product, overheat the battery, or pose a risk to the vehicle.

SAFETY PRECAUTIONS FOR ACOUSTIC PRESSURE

CAUTION: Using earphones or headphones and

prolonged listening at high volume levels may cause permanent hearing loss.

NOTE: For France, mobile headphones or earphones (manufactured by Merry, model number EMC220) for this device have been tested to comply with the Sound Pressure Level requirement laid down in NF EN 50332-1:2000 standard as required by French Article L. 5232-1.

SAFETY IN AIRCRAFTS

Due to the possible interference caused by this product to an aircraft’s navigation system and its communications network, using this device’s phone function on board an airplane is against the law in most countries. If you want to use this device when on board an aircraft, remember to turn off your phone by switching to Flight Mode.

ENVIRONMENT RESTRICTIONS

Do not use this product in gas stations, fuel depots, chemical plants or where blasting operations are in progress, or in potentially explosive atmospheres such as fuelling areas, fuel storehouses, below deck on boats, fuel or chemical transfer or storage facilities, and areas where the air contains chemicals or particles, such as grain, dust, or metal powders. Please be aware that sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.

| 5

EXPLOSIVE ATMOSPHERES

When in any area with a potentially explosive atmosphere or where flammable materials exist, the product should be turned off and the user should obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Users are advised not to use the equipment at refueling points such as service or gas stations, and are reminded of the need to observe restrictions on the use of radio equipment in fuel depots, chemical plants, or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. These include fueling areas, below deck on boats, fuel or chemical transfer or storage facilities, and areas where the air contains chemicals or particles, such as grain, dust, or metal powders.

ROAD SAFETY

Vehicle drivers in motion are not permitted to use telephony services with handheld devices, except in the case of emergency. In some countries, using hands-free devices as an alternative is allowed.

INTERFERENCE WITH MEDICAL EQUIPMENT FUNCTIONS

This product may cause medical equipment to malfunction. The use of this device is forbidden in most hospitals and medical clinics.

NONIONIZING RADIATION

This product should be operated in the suggested normal condition only to ensure the radiative performance and safety of the interference. As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of the equipment and for the safety of personnel, it is recommended that no part of the human body be allowed to come too close to the antenna during operation of the equipment.

GENERAL PRECAUTIONS

• Heed service markings

Except as explained elsewhere in the Operating or Service documentation, do not service any product yourself. Service needed on components inside these compartments should be done by an authorized service technician or provider.

6 |

• Damage requiring service

Unplug the product from the electrical outlet and refer servicing to an authorized service technician or provider under the following conditions:

• Liquid has been spilled or an object has fallen into the product.

• The product has been exposed to rain or water.

• The product has been dropped or damaged.

• There are noticeable signs of overheating.

• The product does not operate normally when you follow the

operating instructions.

• Avoid hot areas

The product should be placed away from heat sources such as radiators, heat registers, stoves, or other products (including ampliﬁers) that produce heat.

• Avoid wet areas

Never use the product in a wet location.

• Avoid pushing objects into product

Never push objects of any kind into cabinet slots or other openings in the product. Slots and openings are provided for ventilation. These openings must not be blocked or covered.

• Mounting Accessories

Do not use the product on an unstable table, cart, stand, tripod, or bracket. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.

• Avoid unstable mounting

Do not place the product with an unstable base.

• Use product with approved equipment

This product should be used only with personal computers and options identiﬁed as suitable for use with your equipment.

• Adjust the volume

Turn down the volume before using headphones or other audio devices.

• Cleaning

Unplug the product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning, but NEVER use water to clean the LCD screen.

| 7

Contents

Chapter 1 Getting Started 11

1.1 Getting to Know Your Device and Its Accessories 12

1.2 About the USIM/SIM Card

and Battery 17

1.3 Starting Up

1.4 The Today Screen 2

1.5 Using the Programs 23

1.6 Device Settings 26

Chapter 2

Entering and Searching Information

2.1 Using the Hardware Keyboard 30

2.2 Input Methods 31

2.3 Using

On-screen Keyboard 32

2.4 Using Letter Recognizer 3

2.5 Using Block Recognizer 3

2.6 Using Transcriber 3

2.7 Using Symbol Pad 3

2.8 Using Notes to Draw, Write,

and Record Voice Notes 3

2.9 Searching Information 36

8 |

Chapter 3 Using Phone Features 37

3.1 Using the Phone 38

3.2 Making a Call 40

3.3 Receiving a Call 42

3.4 Making a Video Call 4

3.5 Receiving a Video Call 4

3.6 Smart Dialing 4

3.7 In-call Options 4

3.8 Additional Dialing Information 5

Chapter 4 Synchronizing Information and Setting Up E-mail Security 51

4.1 Setting Up ActiveSync 52

4.2 Synchronizing Information 56

4.3 Synchronizing via Infrared and Bluetooth 60

4.4 Synchronizing Music, Video, and Pictures 61

4.5 Setting up E-mail Security 62

Chapter 5 Managing Your Pocket PC Phone 65

5.1 Personalizing Your Pocket PC Phone 66

5.2 Adding and Removing Programs 7

5.3 Managing Memory 7

5.4 Backing Up Files 7

5.5 Protecting Your Pocket PC Phone 7

| 9

5.6 Resetting Your Pocket PC Phone 79

Chapter 6 Getting Connected 81

6.1 Connecting to the Internet 82

6.2 Internet Explorer 85

6.3 Using Comm Manager 8

6.4 Using Bluetooth 8

6.5 Using Wi-Fi 9

6.6 Using Wireless Modem 9

6.7 Using Terminal Services Client 10

Chapter 7 Exchanging Messages and Using Outlook 107

7.1 E-mail and Text Messages 108

7.2 MMS Messages 11

7.3 Calendar 121

7.4 Contacts 123

7.5 Tasks 127

7.6 Notes 128

Chapter 8 Experiencing Multimedia 131

8.1 Using Camera 132

8.2 Using Pictures & Videos 144

8.3 Using Windows Media Player 14

8.4 Using Streaming Media Player 15

10 |

Chapter 9 Using Other Applications 157

9.1 Word Mobile 158

9.2 Excel Mobile 158

9.3 Viewing Slide Shows with PowerPoint Mobile 159

9.4 Using ClearVue PDF 16

9.5 Using MIDlet Manager 16

9.6 Using ZIP 16

9.7 Using Voice Speed Dial 16

Appendix 169

A.1 Regulatory Notices 170

A.2 PC Requirement to Run ActiveSync 4.x 174

A.3 Specifications 17

Index 179

1.1 Getting to Know Your Device and Its

Accessories

1.2 About the USIM/SIM Card and Battery

1.3 Starting Up

1.4 The Today Screen

1.5 Using the Programs

1.6 Device Settings

Chapter 1

Getting Started

12 | Getting Started

1.1 Getting to Know Your Device and Its Accessories

2 53 4 6

13 14

16 17 1815

Getting Started | 13

No. Item Function

1 Hardware Keyboard See Chapter 2 for details.

2 MESSAGING Button Press to quick start your Messaging.

3 Notification LED 1 This LED shows a blinking Blue light for

Bluetooth system notification of powered-up and ready to transmit radio frequency signal, and a blinking Green light for Wi-Fi status. When both Bluetooth and Wi-Fi are enabled, their lights blink alternately.

4 Notification LED 2 This bi-color LED shows Green and Amber lights

for UMTS/GSM standby, UMTS/GSM message, UMTS/GSM network status, notification, and battery charging status.

5 INTERNET

EXPLORER Button

Press to launch Internet Explorer.

6 Second Camera Use this video camera for video call

conversations.

7 Jog Wheel When in the Today screen or using applications,

scroll up or down to navigate through menus, program instructions; press the wheel to carry out selection. During a call or playing music, scroll up or down to adjust the sound volume. When receiving an incoming call, scroll down to silence the audio notification.

8 OK Button Press to confirm your data entries, or to exit the

program in use.

9 VOICE COMMAND Press to start Voice Speed Dial; press and hold to

record a voice note.

10 Micro SD Card Slot In this card slot, insert a Micro SD memory card

for storing data, or insert a Micro SD input/output card such as a network card.

11 Touch Screen Tap the screen with the stylus to write, draw, or

make a selection.

12 VIDEO CALL Button After entering a phone number in the Phone

program, press this button to start a video call.

13 Left SOFT KEY Press to execute the command shown in the label

above the button.

14 | Getting Started

No. Item Function

14 Right SOFT KEY Press to execute the command shown in the label

above the button.

15 TALK Button Press to answer an incoming call or dial a

number.

16 START Button Press to open the Start menu.

17 Navigation Control/

ENTER

Press this multi-directional control up, down, left, or right to move through menus and program instructions; carry out the selection by pressing the center button; press and hold a selection to choose option(s) from the shortcut menu.

18 OK Button Press to confirm your data entries, or to exit the

program in use.

19 END Button Press to end a call or to return to the Today

screen.

Getting Started | 15

21 22 23

333230 34

29 31

16 | Getting Started

No. Item Function

20 Car Antenna

Connector

Connect your phone to the car antenna while in a car to have better reception quality.

21 Self-Portrait Mirror Turn the back side of your device to face yourself

so that your image reflects on the mirror when taking self-portrait shots.

22 Main Camera This camera takes still photos and records video

clips. It provides two shooting modes: Normal mode and Macro (close-up) mode.

23 Shooting Mode

Switch

Push the switch up for Normal mode or down for Macro mode.

24 Flash Light When turned on, it illuminates your subject and

allows you to capture clear photos or video even in a dark environment. It also flashes when a photo is taken.

25 POWER Button Press to turn off your device temporarily. This

switches your device to sleep mode. To turn it off completely, press and hold (for about 5 seconds).

You can still receive calls and messages even when your device is in sleep mode. When you turn off the device completely, all functions including the phone will be unavailable for use.

26 COMM MANAGER

button

Press to launch Comm Manager.

27 CAMERA Button Press to launch the camera; press again to take

a photo or video clip, depending on the specified capture mode.

28 Stylus Use the stylus to write, draw, or select items on

the touch screen.

29 Strap Holder It lets you attach a strap for carrying your device.

30 Infrared Port It lets you exchange file(s) or data with other

devices wirelessly.

31 Battery Cover Latch Slide this latch to release the battery cover.

Getting Started | 17

No. Item Function

32 Sync Connector/

Earphone Jack

Use this connector to synchronize data by connecting the provided USB Sync cable or to recharge the battery via the provided AC adapter. You can also connect the provided USB stereo headset for hands-free conversation or for listening to audio media.

33 RESET Button With the stylus, press the RESET button to soft-

reset your device.

34 Microphone Speak into the microphone when receiving or

making a phone call or voice recording.

Accessories

No. Accessory Function

1 AC adapter Converts AC to DC for recharging the battery.

2 USB Sync cable Connects your device to a PC and synchronize

data.

3 Stereo headset Provides a volume control slider and a Send/End

button. Press the Send/End button to pick up a call or put a call on hold; press and hold the button to end the call.

18 | Getting Started

1.2 About the USIM/SIM Card and Battery

Always turn off your device before installing/replacing the battery and USIM/SIM card. Follow the instructions in the Quick Start Guide to install a 3G USIM (Uinversal IC Card) or a GSM SIM (Subscriber Identity Module) card provided by your local network service provider and to install the battery.

The USIM/SIM card contains your phone number, service details, and phonebook/message memory. Your device supports both 1.8V and 3V USIM/SIM cards. Some legacy SIM cards will not function within your device. You should consult with your service provider for a replacement SIM card. There may be fees for this service.

Your device contains a rechargeable Li-ion polymer battery. This device is designed to use only manufacturer-specified original batteries and accessories. Battery performance depends on many factors, including your wireless service provider’s network configuration, signal strength, the temperature of the environment in which you operate your device, the features and/or settings you select and use, items attached to connecting ports, and your voice, data, and other program usage patterns.

Battery life estimates (approximations):

• Standby time: up to 200 hours for GSM; 180 ~ 250 hours for

UMTS.

• Talk time (Screen off): 4 ~ 5 hours for GSM; 2 ~ 4 hours for

UMTS.

Warning! To reduce risk of fire or burns:

• Do not attempt to open, disassemble, or service the battery pack.

• Do not crush, puncture, short external contacts, or dispose of in fire

or water.

• Do not expose to temperatures above 60oC (140oF).

• Replace only with the battery pack designated for this product.

• Recycle or dispose of used battery as stipulated by local regulation.

Getting Started | 19

To check the battery power

Do one of the following:

• Tap the battery level icon ( ) on the Today screen.

• Alternatively, tap Start > Settings > Systems tab > Power.

Power Information

Charge the battery

New batteries are shipped partially charged. Before you start using your device, it is recommended that you install and charge the battery. Some batteries perform best after several full charge/discharge cycles. You can charge the battery in two ways:

•

Connecting your device directly to an external power source.

• Connecting your device to a PC via the provided USB Sync

cable.

Low battery

When the low-battery warning appears, do the following:

• Immediately save your current data.

• Synchronize with your PC or connect the power adapter to

charge the battery.

• Turn off your device.

20 | Getting Started

1.3 Starting Up

Turn your device on and off

To turn on your device, press the POWER button. When you turn on your device for the first time, you are asked to complete a calibration process. For more information, see “Calibrate the device”.

To turn off your device, press and hold the POWER button for a few seconds. A message will then be displayed, prompting you whether or not to turn off the device completely.

Note Quickly pressing the POWER button turns off your device temporarily

and switches it to sleep mode. You will still be able to receive messages and calls while your device is in sleep mode.

Calibrate the device

Calibrating the device screen involves tapping the center of a cross with the stylus as the cross moves around the screen. This process ensures that when you tap the screen with your stylus, the tapped item is activated.

If your device does not accurately respond to screen taps, follow these steps to re-calibrate it:

1. Tap Start > Settings > System tab > Screen.

2. On the General tab, tap Align Screen, then follow the on-screen

instructions to complete the calibration.

Calibrating the device

Getting Started | 21

Manage screen settings

The device’s display has three orientation modes: Portrait, Landscape (right-handed), and Landscape (left-handed). Portrait mode allows

you to get a better view or a better operation of certain programs, while Landscape mode may be optimal for viewing lengthy files.

Portrait mode

Landscape mode

• To change the orientation, tap Start > Settings > System tab >

Screen, and select the orientation you want.

• To smooth the edges of screen fonts for many programs, on the

ClearType

tab, select the Enable ClearType check box.

• To increase the readability or to see more content on the screen,

on the Text Size tab, adjust the text size by moving the slider.

22 | Getting Started

1.4 The Today Screen

The Today screen displays important information, such as upcoming appointments and status indicators. You can tap a section on the screen to open the associated program.

• To access the Today screen, tap Start > Today.

• To customize the Today screen display, including the background

image, tap Start > Settings > Personal tab > Today.

Indicators

The following are some of the status icons that you may see on the device.

Icon Description Icon Description

New e-mail or text messages; SMS notification of voice mail

Roaming

1 Tap to open the Start menu.

2 Tap to view connectivity status.

3 Indicates the radio signal strength. Tap to

configure the phone settings.

4 Tap to adjust device/ringer volume.

5 Displays the current time. Tap to check the

current date and upcoming appointments.

6 Displays the current date. Tap to set up

date, time, alarm, and more.

7 Your day at a glance with reminders. Tap to

open the related program: Text messages, e-mails, voice mails and appointments.

8 Tap to open Comm Manager.

9 Indicates the battery status. Tap to open

the Power Settings screen.

10 Tap to open the Phone screen.

11 Tap to open Contacts.

2 3 4 5

Getting Started | 23

Icon Description Icon Description

There are more notifications. Tap the icon to view all.

Connection is active

Speakerphone on Connection is not active

Dialing while no USIM/ SIM card is inserted

Synchronization in progress

Voice call in progress Synchronization error

Calls are forwarded

Wi-Fi function enabled, but device not connected to a wireless network yet

Call on hold Wireless network(s) detected

Missed call

Connecting to wireless network (arrows moving); Connected to wireless network

Maximum signal strength. Synchronizing via Wi-Fi

No signal Ringer in vibration mode

Phone is turned off Sound on

No phone service Sound off

Searching for phone service

Alarm

3G UMTS network available

No USIM/SIM card inserted

UMTS connecting Comm Manager

UMTS in use Battery is fully charged

GPRS (General Packet Radio Services) available

Battery power is very low

GPRS connecting Battery charging

GPRS in use Device is locked

Device is unlocked

24 | Getting Started

The Start menu

The Start menu, located at the top left corner of the Today screen, displays a list of programs. You can start a program by scrolling through the programs list and then pressing ENTER, or by tapping a program with the stylus.

1 Tap to switch to the Today screen.

2 Tap to start a program. The items

displayed in the Start menu can be customized by tapping Start >

Settings > Personal tab > Menus.

3 Tap to start a recently-used

program.

4 Tap to view and select more

programs that are installed on your device.

5 Tap to change device settings.

6 Tap to see a Help topic for the

current screen.

4 5

1.5 Using the Programs

The following are some of the programs that are already installed on your device.

Icon Description

ActiveSync Synchronizes information between your device and a

PC or the Exchange Server.

Calculator Lets you perform basic arithmetic and calculations, such as addition, subtraction, multiplication, and division.

Calendar Allows you to keep track of your appointments and create meeting requests. Camera Snaps photos or shoots video clips with accompanying audio.

ClearVue PDF Enables you to view PDF files on your device.

Getting Started | 25

Icon Description

Comm Manager Allows you to manage the device’s connection

(including Wi-Fi, Bluetooth, and ActiveSync), disconnect data services (such as GPRS), turn the phone on or off, switch to ringer/ vibration mode, and enable or disable the Direct Push function.

Contacts Allows you to keep track of your friends and colleagues.

Download Agent Provides information about the download status

and the downloaded content from the Internet.

Excel Mobile Creates new workbooks or lets you view and edit Excel workbooks. File Explorer Enables you to organize and manage files on your device. Games Lets you play two pre-installed games: Bubble Breaker and Solitaire.

Help Enables you to see Help topics for a program on your device.

Internet Explorer Allows you to browse Web and WAP sites as well

as download new programs and files from the Internet.

Messaging Allows you to send and receive e-mail, MMS, and text messages.

MIDlet Manager Enables you to download and install Java applications, such as games and tools, on your device.

Notes Allows you to create handwritten or typed notes, drawings, and recordings.

Phone Lets you make and receive calls, switch between calls, and set up conference calling.

Pictures & Videos Lets you view, organize, and sort picture and video files on your device or a storage card. Captured photos are stored in the My Pictures folder, and video clips are saved in the My Videos folder of your device. PowerPoint Mobile Lets you view PowerPoint slides and presentations. Search Enables you to search contacts, data, and other information on your device. SIM Manager Allows you to manage the contacts that are stored on your SIM card. You can also use this program to copy SIM contents to Contacts on your device.

26 | Getting Started

Icon Description

STK (SIM Tool Kit) Service Allows you to access information and

other services offered by your wireless service provider.

Streaming Media Allows you to stream live or on-demand video.

Tasks Allows you to keep track of your tasks.

Terminal Services Client Allows you to log on a PC running

Terminal Services or Remote Desktop, and use all of the programs available on that PC from your mobile device.

Voice Speed Dial Allows you to record voice tags so that you can dial a phone number or launch programs simply by speaking a word.

Windows Media Player Lets you play back media files.

Wireless Modem Enables your.device as an external modem for a

computer via USB, Bluetooth, or infrared.

Word Mobile Lets you create, view, and edit Word documents.

ZIP Enables you to save memory and free up storage space on

your device by compressing files in the conventional ZIP format.

Getting Started | 27

1.6 Device Settings

You can adjust the device settings to suit the way you work. To see all available settings, tap Start > Settings, then tap the Personal,

System, and Connections tabs located at the bottom of the screen.

Personal tab

Icon Description

Buttons Assigns a program to a hardware button.

Input Sets options for each of the input methods.

Lock Sets a password for your device.

Menus Sets what programs will appear in the Start menu.

Owner Information Allows you to enter your personal information

on your device.

Phone Allows you to customize phone settings such as ring tone, set a PIN number for your SIM card, and more.

Sounds and Notifications Enables sounds for events, notifications, and more, and allows you to set the type of notification for different events.

Today Allows you to customize the appearance and the information to be displayed on the Today screen.

Voice Speed Dial Allows you to create voice tags for voice dialing contacts and SIM contacts as well as for launching programs.

28 | Getting Started

System tab

Icon Description

About Allows you to specify a name for your device. Also shows the

Windows Mobile version and copyright information.

Backlight Sets the backlight timeout and brightness.

Certificates Shows information about certificates that are installed

on your device. Clear Storage Removes all your data and files from the memory

and resets your device to factory default settings.

Clock & Alarms Switches the device clock to the date and time of your locale or to a visiting time zone when you're traveling. Alarms can also be set at specified days and times of a week.

Device Information Shows information about the firmware version, hardware, identity, and the duration of calls made on your device.

Error Reporting Enables or disables the device's error reporting function. When this function is enabled and a program error occurs, technical data about the state of the program and your computer will be logged in a text file and delivered to Microsoft's technical support if you choose to send it.

Key Lock Locks the buttons on your device except for the POWER button when the device is in sleep mode. This ensures you will not switch the device on by accident and consume unnecessary power.

Memory Shows the device memory allocation status and memory card information. Also allows you to stop currently running programs.

Microphone AGC Adjusts the volume of your voice automatically when you are recording.

Power Shows the current battery level. Also allows you to set the timeout for turning off the display (switching device to sleep mode) to conserve battery power. Regional Settings Sets the regional language to use and the format for displaying numbers, currency, date, and time on your device.

Remove Programs Lets you remove programs that you installed on your device.

Screen Allows you to change the screen orientation, re-calibrate the screen, and change the screen text size.

Getting Started | 29

Connections tab

Icon Description

Beam Enables your device to receive incoming infrared and

Bluetooth beams.

Bluetooth Turns Bluetooth on, sets your device to discoverable mode, and allows you to scan for other Bluetooth devices.

Connections Sets up one or more types of modem connections for your device, such as phone dial-up, GPRS, Bluetooth, and more, so that your device can connect to the Internet or a private local network. CSD Line Type Sets the line type to use when making a circuit switch data (CSD) connection. Normally, you do not need to change the setting unless you encounter a problem on establishing a connection.

GPRS Setting Sets the GPRS authentication method. Consult your wireless service provider first before changing this setting.

Network Cards Allows your device to scan for available wireless networks. Also allows you to set up a network card (if you have one inserted on your device). Enhances the connection between the device and the computer, in situations when ActiveSync on the computer is unable to detect the device.

Wireless LAN Shows information about the active wireless network, and allows you to customize Wi-Fi settings.

+ 175 hidden pages

Vodafone 1605, VPA Compact III User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual