Vizio VP322HDTV10A Owner’s Manual
VlZlO VP322 HDTV10A User Manual
Dear VlZlO Customer,
Congratulations on your new VlZlO VP322 High
Definition Plasma Television purchase. Thank
you for your support. For maximum benefit of
your set, please read these instructions before
making any adjustments, and retain them for
future reference. We hope you will experience
many years of enjoyment from your new VlZlO
VP322 HDTVl 0A.
For assistance, please call (877) 698-4946 or e-
mail us at techsupport@vizio.com.
To purchase or inquire about accessories and
installation services for your VlZlO PLASMA
HDTV, please visit our website at
www.VlZlO.com or call toll free at 888-VlZlOCE
(888-849-4623).
We recommend you register your VlZlO VP322
HDTVl0A either at our website www.VlZlO.com
or fill in your registration card and mail it in. For
peace of mind and to protect your investment
beyond the standard warranty, VlZlO offers on-
site extended warranty service plans. These
plans give additional coverage during the
standard warranty period. Visit our website or call
us to purchase a plan.
Write down the serial number located on the back
of your VlZlO VP322 HDTVl0A.
Purchase Date
VlZlO is a registered trademark of VlZlO, Inc. dba V, INC.
HDMI logo and "High Definition Multimedia Interface"
are registered trademarks of HDMI Licensing LLC.
Manufactured under license from Dolby Laboratories
Dolby and the double-D symbol are trademarks of Dolby Laboratories
Version 4/8/2008 1
www.VlZlO.com
VlZlOVP322HDTV10AUserManual
Important SaffetV Instructions
This product is designed and manufactured to operate within defined design limits, and misuse
may result in electric shock or fire. To prevent the product from being damaged, the following
rules should be observed for the installation, use and maintenance of the product. Read the
following safety instructions before operating the display. Keep these instructions in a safe place
for future reference.
• To reduce the risk of electric shock or component damage, switch off the power before connecting other components to the VP322
HDTVl 0A.
• Unplug the power cord before cleaning the VP322 HDTVl 0A PLASMA. A damp cloth is sufficient for cleaning the VP322 HDTVl 0A. Do
not use a liquid or a spray cleaner for cleaning the product. Do not use abrasive cleaners.
• Always use the accessories recommended by the manufacturer to insure compatibility.
• When moving the VP322 HDTVl0A from an area of low temperature to an area of high temperature, condensation may form on the
housing. Do not turn on the VP322 HDTVl 0A immediately after this to avoid causing fire, electric shock or component damage.
• Do not place the VP322 HDTVl0A on an unstable cart, stand, or table. If the VP322 HDTVl0A falls, it can injure a person and cause
serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the VP322 HDTVl 0A.
• A distance of at least 3 feet should be maintained between the VP322 HDTV10A and any heat source, i.e. radiator_ heater, oven,
amplifier etc. Do not install the product close to smoke. Operating the product close to smoke or moisture may cause fire or electric
shock.
• Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of the VP322
HDTVl0A and to protect it from overheating, be sure these openings are not blocked or covered. Do not place the VP322 HDTV10A in
a bookcase or cabinet unless proper ventilation is provided.
• Never push any object into the slot on the VP322 HDTVl0A cabinet. Do not place any objects on the top of the product. It could short
circuit parts causing a fire or electric shock. Never spill liquids on the VP322 HDTVl 0A.
• The VP322 HDTVl0A should be operated only from the type of power source indicated on the label. If you are not sure of the type of
power supplied to your home, consult your dealer or local power company.
• The power cable must be replaced when using different voltage from that specified in the User Manual. For more information, contact
your dealer.
• The VP322 HDTV10A is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only
into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire
plug, have an electrician install the correct outleL or use an adapter to ground the appliance safely.
Do not defeat the safety purpose of the grounded plug.
Appliance inlet (or AC inlet) is used asthe disconnect device.
Use only with the cart, stand, tripod, bracket or table specified by manufacturer, or sold with the
apparatus. When a cart is used_ use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
presence of not isolated dangerous voltage within the inside of the product that may be sufficient magnitude to
._X • The lightning flash with arrowhead symbol _within an equilateral triangle_ is intended to alert the user to the
accompanying the appliance.
Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
The wall socket shall be installed near the equipment and shall be easily accessible.
Only the marked power source can be used for the product. Any power source other than the specified
one may cause fire or electric shock.
Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms.
Unplug the unit during a lightening storm or when it will not be used for long period of time. This will protect the VP322 HDTV10A from
damage due to power surges.
Do not attempt to repair or service the product yourself. Opening or removing the back cover may expose you to high voltages_ the risk
of electric sheck_ and other hazards. If repair is required, please contact your dealer and refer all servicing to qualified service personnel.
Keep the product away from moisture. Do not expose this appliance to rain or moisture. If water penetrates into the product, unplug
the power cord and contact your dealer. Continuous use inthis case may result in fire or electric shock.
Do not use the product if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your
dealer immediately. Do not try to repair the product yourself.
Avoid using dropped or damaged appliances. If the product is dropped and the housing is damage& the internal components may
function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of the product may cause
fire or electric shock.
Do not install the product in an area with heavy dust or high humidity. Operating the product in environments with heavy dust or high
humidity may cause fire or electric shock.
Follow instructions for moving the product. Ensure that the power connector and any other cables are unplugged before moving the
product.
Hold the power connector when removing the power cable. Pulling the power cable itself may damage the wires inside the cable and
cause fire or electric shock. When the product will not be used for an extended period of time, unplug the power connector.
To reduce risk of electric shock, de not touch the connector with wet hands.
constitute a risk of electric shock to persons.
• The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and servicing instructions in the literature
Version 4/8/2008
www.VlZlO.com
VlZlO VP322 HDTV10A User Manual
• Insert batteries in accordance with instructions. Incorrect polarities may cause damage and leakage of the batteries, operator injury
and contamination the remote controller.
• If any of the following occurs please contact the dealer:
• Operating environment, Temperature: 40°F ~ 95T, Humidity: 20% _ 80% non-condensing, Altitude: 0 ~ 650Oft (0 ~ 2000m)
o The power connector fails or frays.
o Liquid sprays or any object drops into the VP322 HDTVl 0A.
o The Display is exposed to rain or other moisture.
o The Display is dropped or damaged in anyway.
o The performance of the Display changes substantially.
TeLevision Antenna Connection Protection
External TeLevision Rntenna Gmoondinq
If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the
antenna or cable system is electrically grounded to provide some protection against voltage surges and
static charges.
Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to proper
grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge
unit, size of the grounding conductors, location of antenna discharge unit, connection to grounding
electrodes, and requirements of the grounding electrode.
GROUND CLAMP ANTENNA LEAD IN WIRE
-- ANTENNA DISCHARGE UNIT INECSECTiOn810-20)
GROUNDING CONDUCTORS (N_cSECTIONSl.-Zl)
GROUND CLAMPS
I
ELECTRIC SERVICE EQUIPMENT _ POWER SERVICE GROUNDING ELECTRODE SYSTEM (NT¢AnT25O,P_ATH)
Lightning Protection
For added protection of the High Definition TV during a lightning storm or when it is left unattended or
unused for long periods of time, unplug the TV from the wall outlet and disconnect the antenna or cable
system.
Power Lines
Do not locate the antenna near overhead light or power circuits, or where it could fall into such power
lines or circuits.
Remember, the screen of the coaxial cable is intended to be connected to earth in the building
installation,
Version 4/8/2008 3
www.VlZlO.com
VlZlO VP322 HDTV10A User Manual
Openinq the Packaqe
Your VlZlO VP322 Plasma HDTVl0A and its accompanying accessories are carefully packed in a
cardboard carton that has been designed to protect it from transportation damage. Now you have
opened the carton check that the VP322 Plasma HDTVl0A is in good condition and that all of the
accessories are included.
The VP322 Plasma HDTVl0A weighs approximately 40 Ibs and is nearly 32" wide and we advise that you
take sensible lifting precautions when you unpack and install the HDTV.
The screen can easily be scratched or broken so please handle the product gently and never place the
HDTV with the glass facing downwards on a surface without protective padding.
IMPORTANT: Save the carton and packing material for future shipping.
Packaqe Contents
VIZIO VP322 HDTV10A
VlZlO Remote Control VR2
Power Cord
This User Manual
VlZIO Bezel and Screen Cleaning Cloth
Quick Setup Guide
Registration Card
VlP Services Brochure
2 (Double A) Batteries for the Remote Control
VlZlO Warranty and Repair Information
Version 4/8/2008 4
www.VlZlO.com
VlZlOVP322HDTV10AUserManual
ROOeSSOFieS
VP3sa HDTV oR are sold separate[ v
Wall Mounts
High Definition Cables
Extra or replacement Remote
VlZlO also offers Installation Services and Extended Warranty Services for your VlZlO VP322 HDTVl0A
To purchase or inquire about additional accessories and services for your VlZlO product, visit our web
site at www.VlZlO.com or call us toll free at 888-VlZlOCE (888-849-4623)
InstatLatlon mmepamation
Please read this user manual carefully before installing your VlZlO HDTV.
The power consumption of the High Definition TV is about 220W, please use the power cord designated
for TV. When an extension cord is required, use one with the correct power rating. The cord must be
grounded and the grounding feature must not be defeated.
The TV should be installed on a flat surface to avoid tipping. For proper ventilation, you must allow space
between the back of the High Definition TV and the wall. If you would like to mount your TV on the wall,
please see below 'Preparing Your PLASMA HDTV for Wall Mounting' for additional information. Avoid
installing the TV in places with high humidity, dust or smoke so as not to shorten the service life of the
electronic components.
Install the TV in landscape orientation; any 90 ° clockwise or counter-clockwise installation may induce
poor ventilation and excessive component damage.
VlZlO offers professional installation services. Please contact VlZlO for more information on these
services at 888-VIZIOCE (888-849-4623) or www.VlZlO.com.
Version 4/8/2008 5
www.VlZlO.com
VlZIOVP322HDTVl0AUserManual
Prepadnq Your PLASMA HDTV ffor Wall Mounbinq
To remoue the stand base
1. Unplug all of the cables and cords
from your VlZlO VP322 Plasma
HDTVl0A.
2. Place the VP322 PLASMA face down
on a soft and flat surface (blanket,
foam, cloth, etc) to prevent any
damage to the TV.
3. Remove the four (4) screws holding
the base to the VP322 PLASMA.
4. Carefully remove the stand base.
Now, the VP322 Plasma HDTV10A can fit
securely to a mount (sold separately) by
utilizing the mounting holes in the center of
the back panel of the High Definition TV.
Please make sure to read the instructions of
your specific mount to properly hang the
VP322 Plasma HDTV10A.
The pitch of the mounting holes is 400ram
horizontally and 200ram vertically.
The screw type required is metric M6, 20ram
long, 1.0ram pitch. The length of the screws
will depend on the thickness plate being
attach to the TV; our brackets come with
different length screws.
To find the perfect mount for the VlZIO VP322 Plasma, browse VIZIO's certified mount selection at
www.VIZIO.com or call directly 888-VIZIOCE (888-849-4623).
Version 4/8/2008 6
www.VlZlO.com
VlZIOVP322HDTVl0AUserManual
TabLe off Contents
Chapter k Basic Controks and Connections .................................................................
1.1 Front Panel .......................................................................................................................................................... 9
1.2 Right Side Panel Controls ................................................................................................................................... 9
1.3 Left Side Panel Connections ............................................................................................................................. 10
1.4 VlZIO Remote Control ....................................................................................................................................... 11
1.4.1 Insertion of Batteries in the Remote Control .............................................................................................. 12
1.4.2 Remote Control Range .............................................................................................................................. 12
1.4.3 VlZlO Remote Control Precautions ........................................................................................................... 12
Chapter _ ConnectinQ Equipment ................................................................................ £3
2.1 Which Video Connection Should I Use? ............................................................................................................ 13
2.2 Connecting Coaxial (RF) ................................................................................................................................... 14
2.2.1 Using Your Antenna or Digital Cable for DTV/TV ..................................................................................... 14
2.2.2 Using the Antenna or Cable through your VCR ......................................................................................... 14
2.3 Connecting Your HDTV Set-Top Box ................................................................................................................ 15
2.3.1 Using HDMI ............................................................................................................................................... 15
2.3.2 Using Component Video ............................................................................................................................ 17
2.4 Connecting Your Basic Set-Top Box ................................................................................................................. 18
2.4.1 Using Coaxial (RF) .................................................................................................................................... 18
2.4.2 Using Composite Video ............................................................................................................................. 18
2.5 Connecting Your DVD Player ............................................................................................................................ 19
2.5.1 Using HDMI ............................................................................................................................................... 19
2.5.2 For DVD Players with DVl ......................................................................................................................... 20
2.5.3 Using Component Video ............................................................................................................................ 21
2.5.4 Using S-Video (AV) .................................................................................................................................... 22
2.5.5 Using Composite (AV) Video ..................................................................................................................... 22
2.6 Connecting Your VCR or Video Camera .......................................................................................................... 23
2.7 Connecting an external Receiver/Amp .............................................................................................................. 24
2.7.1 Optical Output of Audio received with HD Programs ................................................................................. 24
2.8 Connecting a PC Computer .............................................................................................................................. 25
2.8.1 Preset PC Resolutions ............................................................................................................................... 26
Chapter 3 Settcinq Up to Wat-ch Tetevision .................................................................. _7
3.1 Basic Plasma HDTV Start Up............................................................................................................................ 27
3.2 Watching a TV Program .................................................................................................................................... 32
3.3 Adjusting Basic HDTV Settings ......................................................................................................................... 33
3.4 Program Information .......................................................................................................................................... 34
3.5 Information on HDTV Status ............................................................................................................................. 34
Chapter ¢ Rdvanced Rd3ust/msst of HDTg ........................................................................... 35
4.1 Using the On Screen Display (OSD) ................................................................................................................. 35
4.2 DTV / TV Input Picture Adjustment .................................................................................................................... 36
4.2.1 Picture Mode ............................................................................................................................................. 36
4.2.2 Brightness .................................................................................................................................................. 37
4.2.3 Contrast ..................................................................................................................................................... 37
4.2.4 Color .......................................................................................................................................................... 37
4.2.5 Tint ............................................................................................................................................................. 38
4.2.6 Sharpness ................................................................................................................................................. 38
4.2.7 Color Temperature ..................................................................................................................................... 39
4.2.8 Advanced Video ........................................................................................................................................ 39
4.3 DTV / TV Input Audio Adjustment ...................................................................................................................... 41
4.3.1 Volume ...................................................................................................................................................... 41
4.3.2 Bass ........................................................................................................................................................... 41
4.3.3 Treble ........................................................................................................................................................ 42
4.3.4 Balance ...................................................................................................................................................... 42
4.3.5 Surround .................................................................................................................................................... 42
4.3.6 Digital Audio Out ........................................................................................................................................ 42
4.3.7 Speakers ................................................................................................................................................... 43
4.3.8 Lip Sync ..................................................................................................................................................... 43
4.4 DTV / TV Tuner Setup ....................................................................................................................................... 44
4.4.1 Tuner Mode ............................................................................................................................................... 44
4.4.2 Auto Search ............................................................................................................................................... 44
Version 4/8/2008 7
www.VlZlO.com
VlZlOVP322HDTV10AUserManual
4.4.3 Skip Channel ............................................................................................................................................. 44
4.4.4 MTS ........................................................................................................................................................... 45
4.4.5 Time Zone ................................................................................................................................................. 45
4.4.6 Daylight Saving .......................................................................................................................................... 45
4.5 DTV / TV Input Setup ........................................................................................................................................ 46
4.5.1 Language ................................................................................................................................................... 46
4.5.2 Sleep Timer ............................................................................................................................................... 46
4.5.3 Wide .......................................................................................................................................................... 46
4.5.4 Input Naming ............................................................................................................................................. 47
4.5.5 Closed Caption (CC) .................................................................................................................................. 48
4.5.6 Closed Caption On Mute (CC On Mute) .................................................................................................... 48
4.5.7 Digital Closed Caption Style (Digital CC Style) .......................................................................................... 49
4.5.8 Reset All Settings ...................................................................................................................................... 49
4.5.9 Image Cleaner ........................................................................................................................................... 49
4.6 DTV / TV Input Parental Control ........................................................................................................................ 50
4.6.1 Channel Block ........................................................................................................................................... 50
4.6.2 TV Rating ................................................................................................................................................... 51
4.6.3 Movie Rating .............................................................................................................................................. 52
4.6.4 Check for New DTV Rating ........................................................................................................................ 52
4.6.5 Blocked Unrated Programming .................................................................................................................. 53
4.6.6 Change the Password ............................................................................................................................... 53
4.7 HDMI Input Picture Adjustment ......................................................................................................................... 54
4.8 HDMI Input Audio Adjustment ........................................................................................................................... 54
4.9 HDMI Input Setup .............................................................................................................................................. 54
4.10 Video Input Picture Adjustment ....................................................................................................................... 55
4.11 Video Input Audio Adjustment ......................................................................................................................... 55
4.12 Video Input Setup ............................................................................................................................................ 56
4.12.1 Auto Phase (for Component input) .......................................................................................................... 56
4.13 Video Input Parental Control ........................................................................................................................... 56
4.14 PC Input Picture Adjustment ........................................................................................................................... 57
4.14.1 Auto Adjust .............................................................................................................................................. 57
4.14.2 Brightness ................................................................................................................................................ 57
4.14.3 Contrast ................................................................................................................................................... 58
4.14.4 Color Temperature ................................................................................................................................... 58
4.14.5 H-SIZE ..................................................................................................................................................... 59
4.14.6 H. Position ............................................................................................................................................... 59
4.14.7 V. Position ............................................................................................................................................... 59
4.14.8 Fine Tune ................................................................................................................................................ 59
4.15 PC Input Audio Adjustment ............................................................................................................................. 60
4.16 PC Input Setup ................................................................................................................................................ 60
4.17 Understanding Viewing Features .................................................................................................................... 61
4.17.1 Viewing Modes ........................................................................................................................................ 61
4.18 Using a Cable or Satellite Remote .................................................................................................................. 62
Chapter 8 Maintenance and Troub_eshoot_nq ............................................................8_
5.1 Maintenance ...................................................................................................................................................... 62
5.2 Troubleshooting Guide ...................................................................................................................................... 63
5.3 Telephone & Technical Support ........................................................................................................................ 64
5.4 Compliance ....................................................................................................................................................... 65
5.5 FCC Class B Radio Interference Statement ...................................................................................................... 65
Chapter 5 M_sce[[aneoos h_ormation ..........................................................................65
6.1 Specifications .................................................................................................................................................... 66
6.2 Glossary - Standard Definitions ........................................................................................................................ 67
6.3 Index ................................................................................................................................................................. 68
Version 4/8/2008 8
www.VlZlO.com
VlZIO VP322 HDTVl0A User Manual
Chaptem m Basio Contmo[s and Connections
mornPmont Panel
POWER 'VIZlO' LIGHT- The VlZlO name lights white
when powered on and orange when powered off,
REMOTE CONTROL SENSOR - This is the window
through which all of the remote control signals pass to
the sensor, Point the remote control directly at this
window for the best response to the remote signal,
mo8 Riqht S de Pane[ Contmo[s
POWER ( _ ) - Switch the VP322 HDTV10A on by pressing the button once,
Press the button again to turn the VP322 Plasma HDTV10A off.
MENU - This button activates the On Screen Display (OSD). If a sub-menu is
active, pressing this button will return to the previous menu level.
CH (+ or -) - Use these buttons to step up or down the TV channels, While the
OSD is active, these buttons function as up and down controls in the OSD
menus,
VOL (÷ or -) - Use these buttons to increase or decrease to the speaker volume.
While the OSD is active, these buttons function as left and right controls in the
OSD menus,
INPUT - Repeated pressing of this buttons steps
through the input sources in the following
sequence: TV, AV (S-VIDEO), Component, RGB,
HDMI1, HDMI2 and HDMI3. Once you have
stepped through the entire sequence, you will
return to the beginning.
Version 4/8/2008 9
www.VlZlO.com
VlZIOVP322HDTV10AUserManual
£°3 Left Side Panel Connections
DTV/TV - Connect to an antenna or digital cable (no Cable Box) for Digital TV,*
OPTICAL AUDIO OUT - When an audio signal is associated with an input which is
selected for viewing, the audio associated with the programming will be available on this
SPDIF Optical connector for connection to your home theatre system, The white color
band on the TV indicates this connection,
AV/S-VlDEO IN - Connect the source for composite video devices, such as a VCR or
video game, Use the white and red connectors to connect the external audio from the
same source. This connection is on the side of the High Definition TV, The signal
carried by the S-Video cable and connector; if connected, will take priority over the video
(yellow connector) RCA connector, Keep in mind that if audio is needed then left (white
connector) and right (red connector) must be connected to the signal source using the RCA
audio patch cables,
COMPONENT (YPb/CbPr/Cr with Audio L/R) - Connect the primary source for
component video devices such as a DVD Player or set top box here, From top to bottom.
use red for Pr (or Cr), blue for Pb (or Cb), red for right audio and white for left audio inputs.
The green color band indicates this connection.
RGB PC - Connect the video and audio from a computer here, The blue color band
TV indicates this connection. A 1/8" plug stereo cable is needed to connect the audio
from the computer to the 1/8" jack connector on the side of the High Definition TV.
HDMI 3 - Connect the third source for digital video such as a DVD multimedia player or set
top box through this digital connector. The white color band on the TV indicates this
connection. For users who want to connect to a DVI enabled device, use a DVI-HDMI
cable and connect the Analog Audio output of the device to the L+R AUDIO here. Your
VIZIO Certified HDMI and HDMI-DVI cables are available for purchase from
www.VIZlO,com or by calling 888-VIZIOCE (888-849-4623).
HDMI 2 - Connect the secondary source for digital video such as a DVD multimedia player
or set top box through this digital connector, The white color band on the side of the High,,
Definition TV indicates this connection,
HDMI 1 - Connect the primary source for digital video such as a DVD multimedia player _or
set top box through this digital connector, The white color band on the side of the TV
indicates this connection,
SERVICE - This custom communication port is for factory service only. Use of this input
for any purpose other than factory authorized service will void the manufacturer's _
warranty of this equipment.
ANALOG AUDIO OUT - Connect the audio from the Plasma HDTV
device, such as a home theatre system, external amplifier or stereo, Speakers
cannot be connected directly to here. The white color band on the side of the TV
indicates this connection,
AC IN - Plug-in the supplied AC Power Cord here.
* For digital TV stations in your area visit www.antennaweb.orq.
Version 4/8/2008 10
www.VlZlO.com
VlZlO VP322 HDTV10A User Manual
W ZIO Remote Control
GUIDE - This button displays program information. Press this button once and the information of the
program being viewed is shown. Press it a second time and the Electronic Programming Guide will
appear in the screen.
POWER - Press this button to turn the TV on from the Standby mode. Press it again to return to the
Standby mode.
TV - Press this button to select TV.
AV - Press this button to select the Audio Video input. Pressing this button
repeatedly will get you to the AV input. Keep in mind that if S-Video cable is
being used, then AV will show the signal going through this input as the S-
video takes priority.
COMP - Press this button to select the Component (YPbPr) input. Pressing
this button repeatedly will take you through the Component input.
HDMI - Press this button to select the HDMI input. Pressing this button
repeatedly will get you through the HDMI (HDMI1, HDMI2 and HDMI3)
different inputs.
MENU - Use this button for the On-Screen Display (OSD) menus. When use
within the OSD menus, pressing this key will make the selection of an option.
_iD AI_ - These buttons navigate the On-Screen Display (OSD).
MUTE - This button turns the sound on and off.
LAST - This button recalls the previously viewed channel when it is used in
TV mode; meaning that the TV unit has control over the signal or program
being watched. This button also has different functions when being used in
conjunction with the On-Screen Display (OSD) menu.
VOL &IT - This button turns the volume up or down.
CH &IT - This button changes the channels up or down.
NUMBER BUTTON PAD - Use these buttons to
select a channel or enter a password.
INPUT - This button allows the user to cycle
through the inputs. Repeatedly pressing of this
button will step you through the input sources in
the following sequence: TV, AV (S-Video),
Component, RGB, HDMI1, HDMI2 and HDMI3.
Once you have stepped through the entire
sequence, you will return to the beginning.
- (DASH) - When selecting a digital channel
directly, use this button for the separation of
main and sub-channels. For example, channel
28-2 would be selected by the button sequence
28-2.
Version 4/8/2008 11
www.VlZlO.com
VlZIO VP322 HDTVl0A User Manual
z°¢z Insertion off 8arteries in the Remote Control
Press and slide out the battery cover by following the direction shown by the molded arrow on the surface
of the cover.
Insert two AA batteries into the remote control. Make sure that you match the (+) and (-) symbols on the
batteries with the (+) and (-) symbols inside the battery compartment.
Press and slide the battery cover back into place.
Precautionary Tips for Inserting the Batteries:
Only use the specified AA batteries.
Do not mix new and old batteries. This may result in cracking or leakage
that may pose a fire risk or lead to personal injury.
Inserting the batteries incorrectly may also result in cracking or leakage
that may pose a fire risk or lead to personal injury.
Dispose of the batteries in accordance with local laws and regulations.
Keep the batteries away from children and pets.
104,,2 Remote Control Ramqe
Point the remote control at the remote control sensor to transmit the commands.
Do not place any obstacles between the remote control and the receiver window.
The effective range of the remote control is approximately 30 feet (10 meters) from the front of the
receiver window, 30°to the left and right, 20 ° up and down.
i.¢3 VIZIO Remote Controk Precautions
The remote control should be kept dry and away from heat sources. Avoid humidity.
If the TV responds erratically to the remote control or does not respond at all, check the batteries. If the
batteries are low or exhausted, replace them with fresh batteries.
When not using the remote control for a long period of time, remove the batteries.
Do not take the batteries apart, heat them, or throw them into a fire.
Do not subject the remote control to undue physical stress, such as striking or dropping it.
Do not attempt to clean the remote control with a volatile solvent. Wipe it with a clean, damp cloth.
Version 4/8/2008 12
www.VlZlO.com
VlZIOVP322HDTV10AUserManual
Chapter 2 Connectinq Equipment
a°s Which Video Connecbion Should I Use9
The VIZlO VP322 PLASMA has six different ways to connect your video equipment from a basic
connection to the most advanced for digital displays.
HDMI (High-Definition Multimedia Interface) - It is the
first and only industry-supported, uncompressed, all-
Best
White
(digital)
digital audio/video interface. HDMI provides an
interface between any audio/video source, such as a
set-top box, DVD player, or A/V receiver and an
audio and/or video monitor, such as a digital
television (DTV), over a single cable.
Best
(digital)
Good
(analog)
Best
(analog)
Better
(analog)
Good
(analog)
Black
Blue
Green
Yellow
and
Red
DTV Coaxial RF. When used for MPEG2 encoded bit
streams from ATSC broadcast programming, this
input takes advantage of the High Definition content.
TV Coaxial RF. This is the connection for standard
NTSC TV using antenna or cable.
RGB PC (VGA) - This video input has separate red,
green and blue color components. The signal carries
horizontal and vertical sync information on the green
signal. This is most commonly used for PC input.
Component - The video signal is separated into three
signals, one containing the black-and-white
information and the other two containing the color
information. This enhancement over S-Video takes
advantage of the superior picture provided by
progressive scan DVD players and HDTV formats.
Composite (AV) - The complete video signal is
carried through this single (yellow) pin connector.
This is the most commonly used video connection.
S-Video (AV) - The video signal is separated into two
signals, one containing the black-and-white
information and the other containing the color
information. Separating the color in this way avoids
'cross color' effects where closely spaced black and
white lines are erroneously displayed in color. It also
enables text to be displayed more sharply.
Nolle: Fo moe
_to fete _:o_:te Q_[ck Sta/: G_de
Version 4/8/2008 13
www.VlZlO.com
VlZIO VP322 HDTVl0A User Manual
_o2 Connectinq Coaxial {RF}
aoa°s Osinq Your Rntenna or Digital Gable fo_ DTV /TV
.
Turn off the power to the HDTV.
2.
4.
Connect the coaxial (RF) connector from your antenna
or digital cable (out-of-the-wall, not from the Cable
Box) to the DTV/TV CABLE/ANTENNA connector.
.
Turn on the power to the HDTV.
Select DTV using the INPUT button on the remote or side of the High Definition TV,
or directly by pressing the TV button on the Remote Control.
2°a,2Uslnq the Rntenna om Cable thmouqh
I.
2.
4.
Turn off the power to the HDTV and VCR.
Connect the "Output to TV", "RF Out" or "Antenna Out" connector on the rear of your
VCR to the DTV/TV CABLE/ANTENNA connector at the left hand side of the High
Definition TV.
.
Turn on the power to the HDTV and VCR.
Select TV using the INPUT button on the remote or side of the High Definition TV, or
directly by pressing the TV button on the Remote Control.
Version 4/8/2008 14
www.VlZlO.com
VlZIOVP322HDTVIOAUserManual
Connectlnq Your HOTY Set-Top 8o×
ao3oZ Usinq HDM_
HDTV Set-Top Boxes that have a HDMI digital interface should be connected to the HDMI
input of the Plasma HDTV for optimal results.
Eonnectinq your HDTV SetoTop Box {Best]:
I.
2.
4.
Turn off the power to the HDTV and HDTV Set-Top Box.
Connect a HDMI cable to the HDMI output of your HDTV Set-Top Box and the
other end to the HDMI Input (white color area) at the left hand side of the High
Definition TV.
,
Turn on the power to the HDTV and HDTV Set-Top Box.
Select HDMI 1 using the INPUT button on the remote or side of the High Definition
TV, or directly by pressing the HDMI button on the Remote Control.
.
If HDMI 1 is being used, used either HDMI2 or HDMI3 as the input and follow
steps 1 through 3; and then select either HDMI2 or HDMI3 in step 4.
Version 4/8/2008 15
www.VlZlO.com
For HDTV SetoTOp Boxes with DU_:
.
Turn off the power to the HDTV and HDTV Set-Top Box.
2.
5.
Using a HDMI-DVl cable, connect the DVl end to your HDTV Set-Top Box and the
HDMI3 end to the HDMI Input (white color area) at the left hand side of the High
Definition TV.
,
Using an audio cable (white and red connectors), connect the cable to the audio
output connectors associated with the DVl output on your HDTV Set-Top Box and
connect the other end to the audio connectors associated with the HDMI input
(white area) at side of the High Definition TV.
,
Turn on the power to the HDTV and HDTV Set-Top Box.
Select HDMI3 using the INPUT button on the remote or side of the High Definition
TV, or directly by pressing the HDMI button on the Remote Control.
VlZlOVP322HDTV10AUserManual
Version 4/8/2008 16
www.VlZlO.com
VlZIOVP322HDTV10AUserManual
2.3°2 Uslnq Component Video
Conneotinq your HOTV SetoTop 8ox {Sette_):
I,
2.
7.
Turn off the power to the HDTV and HDTV Set-Top Box.
Connect the Y (green color) connector on your HDTV Set-Top Box to the
corresponding Y (green color) connector in the Component group (green color
area, row of connectors) at the left hand side of the High Definition TV.
,
Connect the Pb (blue color) connector on your HDTV Set-Top Box to the
corresponding Pb (blue color) connector in the Component group (green color
area) at the left hand side of the High
Definition TV.
,
Connect the Pr (red color) connector
on your HDTV Set-Top Box to the
corresponding Pr (red color) connector
in the Component group (green color
area
row of connectors) at the side of the High Definition TV.
,
Using an audio cable (white and red connectors), connect the cable to the audio
output connectors associated with the Component output on your HDTV Set-Top
Box and connect the other end to the audio connectors associated with the
Component input (green color area) at the left hand side of the High Definition
TV.
.
Turn on the power to the HDTV and HDTV Set-Top Box.
Select Component using the INPUT button on the remote or side of the High
Definition TV, or directly by pressing the COMP button on the Remote Control.
Version 4/8/2008 17
www.VlZlO.com
VlZIOVP322HDTV10AUserManual
2°4 Connecbinq Your Basic SebTop Box
.
Turn off the power to the HDTV and Set-Top Box.
2.
.
4.
Using a Coax (RF) cable, connect one end to the TV OUT (RF) on your Set Top Box
and the other end to the DTV/TV input at the left hand side of the High Definition TV.
Turn on the power to the HDTV and Set-Top Box.
Select TV using the INPUT button on the remote or side of the High Definition TV, or
directly by pressing the TV button (below the GUIDE button) on the Remote Control.
2,¢2 Usinq Composite Video
I.
2.
Turn off the power to the HDTV and Set-Top Box.
Using the AV Cable, connect the Video (yellow color) connector on your Set-Top
Box to the corresponding Video (yellow color) connector in the AV group (yellow
color area) at the left hand side of the High Definition TV.
.
Using the white and red connectors, connect the cable to the audio output
connectors associated with the Video output on your Set-Top Box and connect the
other end to the audio connectors associated with the AV input (yellow color area) at
the left hand side of the High Definition TV.
Turn on the power to the TV and Set-Top Box.
Select AV using the INPUT button on the remote or side of the High Definition TV, or
directly by pressing the AV button on the Remote Control.
Version 4/8/2008 18
www.VlZlO.com
VlZIOVP322HDTV10AUserManual
2oS Commeotimq Your DVD PLaver
You have several options for connecting your DVD player to your VlZlO VP322 HDTVl0A; HDMI,
Component, AV (S-Video or Composite) inputs. Based on your configuration, you can decide which
option is right for you.
s_S°i Usinq HDNJ
DVD players that have a digital interface such as HDMI (High Definition Multimedia Interface)
should be connected to the HDMI input of the VIZIO VP322 PLASMA for optimal results.
Connectinq VOUr OVO Prayer {Best}:
.
Turn off the power to the High Definition TV and DVD player.
2.
Connect a HDMI cable to the HDMI output of your DVD player and the other end
to the HDMI Input (white color area) at the left hand side of the High Definition TV.
.
Turn on the power to the High Definition TV and DVD player.
4.
Select HDMI 1 using the INPUT button on the remote or side of the High Definition
TV, or directly by pressing the HDMI button on the Remote Control.
.
If HDMI 1 is being used, connect to either HDMI 2 or HDMI 3 as the input and
follow steps 1 through 3; and then select either HDMI 2 or HDMI 3 in step 4.
Version 4/8/2008 19
www.VlZlO.com
2°S°2 For DUD Players with DVI
.
Turn off the power to the High Definition TV and DVD player.
2.
Using a HDMI-DVl cable, connect the DVl end to your DVD player and the HDMI3
end to the HDMI Input (white color area) at the left hand side of the High Definition
TV.
.
Connect an audio cable (white and red connectors) to the audio output connectors
associated with the DVl output of the DVD player and connect the other end to the
audio connectors by the HDMI input (white area) at the left side of the High
Definition HDTV.
.
Turn on the power to the High Definition TV and your DVD player.
5.
Select HDMI3 using the INPUT button on the remote or side of the High Definition
TV, or directly by pressing the HDMI button on the Remote.
VlZlOVP322HDTV10AUserManual
Version 4/8/2008 20
www.VlZlO.com
3o$.3 Usinq Componenb Video
Connectinq your DVD Ptsver {Sette_}:
,
Turn off the power to the High Definition TV and DVD player.
2.
7.
Connect the Y (green color) connector on your DVD player to the corresponding
Y (green color) connector in the Component group (green color area) at the left
hand side of the High Definition TV.
.
Connect the Pb (blue color) connector on your DVD
player to the corresponding Pb (blue color) connector in
the Component group (green
color area - row of connectors)
at the left hand side of the High
Definition TV.
.
Connect the Pr (red color) connector on your DVD player to the corresponding Pr
(red color) connector in the Component group (green color area - row of
connectors) at left hand the side of the High Definition TV.
.
Using an audio cable (white and red connectors), connect the cable to the audio
output connectors associated with the Component output on your DVD player
and connect the other end to the audio connectors associated with the
Component input (green color area) at the left side High Definition TV.
.
Turn on the power to the High Definition TV and DVD player.
Select Component using the INPUT button on the remote or side High Definition
TV, or directly by pressing the COMP button on the Remote Control.
VlZlOVP322HDTV10AUserManual
Version 4/8/2008 21
www.VlZlO.com
Loading...