Vizio VO22L User Manual 2
VIZIO VO22L HDTV10A User Manual
Dear VIZIO Customer,
Congratulations on your new VIZIO VO22L
HDTV10A High Definition LCD Television
purchase. Thank you for your support. For
maximum benefit of your set, please read these
instructions before making any adjustments, and
retain them for future reference. We hope you will
experience many years of enjoyment from your
new VIZIO VO22L HDTV10A High Definition
Television.
For assistance, please call (877)-698-4946 or email us at
techsupport@vizio.com.
To purchase or inquire about accessories and
installation services for your VIZIO LCD HDTV,
please visit our website at
www.vizio.com or call
toll free at (888)-849-4623.
We recommend you register your VIZIO VO22L
HDTV10A either at our website
www.VIZIO.com
or fill in your registration card and mail it in. For
peace of mind and to protect your investment
beyond the standard warranty, VIZIO offers onsite extended warranty service plans. These
plans give additional coverage during the
standard warranty period. Visit our website or call
us to purchase a plan.
Write down the serial number located on the back
of your VO22L HDTV10A.
__ __ __ __ __ __ __ __ __ __ __ __ __
L
Purchase Date _____________________
VIZIO is a registered trademark of V, Inc.
HDMI logo and “High Definition Multimedia Interface” are registered trademarks of HDMI Licensing LLC.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Version 7/22/2008 1
www.VIZIO.com
VIZIO VO22L HDTV10A User Manual
THIS PRODUCT HAS BEEN DESIGNED AND TESTED FOR COMPLIAN C E WITH REGU L ATO R Y SAFETY CERTIFICATIONS
This product is designed and manufactured to operate within defined design limits, and misuse may result in electric
shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation,
use and maintenance of the product. Read the following safety instructions before operating the display. Keep these
instructions in a safe place for future reference.
• To avoid the risk of electric shock or component damage, switch off the power before connecting other components to the VO22L
HDTV10A LCD HDTV.
• Unplug the power cord before cleaning the VO22L HDTV10A LCD HDTV. A damp cloth is sufficient for cleaning the VO22L HDTV10A
LCD HDTV. Do not use a liquid or a spray cleaner for cleaning the product. Do not use abrasive cleaners.
• Always use the accessories recommended by the manufacturer to insure compatibility.
• When moving the VO22L HDTV10A LCD HDTV from an area of low temperature to an area of high temperature, condensation may
form on the housing. Do not turn on the VO22L HDTV10A LCD HDTV immediately after this to avoid causing fire, electric shock or
component damage.
• Do not place the VO22L HDTV10A LCD HDTV on an unstable cart, stand, or table. If the VO22L HDTV10A LCD HDTV falls, it can
injure a person and cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with
the VO22L HDTV10A LCD HDTV.
• A distance of at least 3 feet should be maintained between the VO22L HDTV10A LCD HDTV and any heat source, i.e. radiator, heater,
oven, amplifier etc. Do not install the pr oduct close to smoke. Operating the product clos e to smoke or m oisture may cause fire or
electric shock.
• Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of the VO22L
HDTV10A LCD HDTV and to protect it from overheating, be sure these openings are not blocked or covered. Do not place the VO22L
HDTV10A LCD HDTV in a bookcase or cabinet unless proper ventilation is provided.
• Never push any object into the slot on the VO22L HDTV10A LCD HDTV cabinet. Do not place any objects on the top of the product. It
could short circuit parts causing a fire or electric shock. Never spill liquids on the VO22L HDTV10A LCD HDTV.
• The VO22L HDTV10A LCD HDTV should be operated only from the type of power source indicated on the label. If you are not sure of
the type of power supplied to your home, consult your dealer or local power company.
• The power cable must be replaced when using different voltage from that specified in the User Manual. For more information, contact
your dealer.
• The VO22L HDTV10A LCD HDTV is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit
only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician
install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of the grounded plug.
• Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
• The wall socket shall be installed near the equipment and shall be easily accessible.
• On ly the marked power source can be used for the product. Any power source other than the specified one may cause fire or electric
shock.
• Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms.
• Unplug the unit during a lightening storm or when it will not be used for long period of time. This will protect the VO22L HDTV10A LCD
HDTV from damage due to power surges.
• Do not attempt to repair or service the product yourself. Opening or removing the back cover may expose you to high voltages, the risk
of electric shock, and other hazards. If repair is required, please contact your dealer and refer all servicing to qualified service
personnel.
• Keep the product away from moisture. Do not expose this appliance to rain or moisture. If water penetrates into the product, unplug
the power cord and contact your dealer. Continuous use in this case ma y result in fire or electric shock.
• Do not use the product if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your
dealer immediately. Do not try to repair the product yourself.
• Avoid using dropped or damaged appliances. If the product is dropped and the housing is damaged, the internal components may
function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of the product may cause
fire or electric shock.
• Do not install the product in an area with heavy dust or high humidity. Operating the product in environments with heavy dust or high
humidity may cause fire or electric shock.
• Follow instructions for moving the product. Ensure that the power connector and any other cables are unplugged before moving the
product.
• Hold the power connector when removing the power cable. Pulling the power cable itself may damage the wires inside the cable and
cause fire or electric shock. When the product will not be used for an extended period of time, unplug the power connector.
• To avoid risk of electric shock, do not touch the connector with wet hands.
• Insert batteries in accordance with instructions. Incorrect polarities may cause damage and leakage of the batteries, operato
and contamination the remote controller.
• If any of the following occurs please contact the dealer:
o The power connector fails or fr ays.
o Liquid sprays or any object drops into the VO22L HDTV10A LCD HDTV.
o The Display is exposed to rain or other moisture.
o The Display is dropped or damaged in any way.
o The performance of the Display changes substantially.
r injury
Version 7/22/2008 2
www.VIZIO.com
VIZIO VO22L HDTV10A User Manual
Television Antenna Connection Protection
External Television Antenna Grounding
If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the
antenna or cable system is electrically grounded to provide some protection against voltag e surges and
static charges.
Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to proper
grounding of the mast and supporting structure , grounding of the lead-in wire to an antenna discharge
unit, size of the grounding conductors, location of antenna discharge unit, connection to grounding
electrodes, and requirements of the grounding electrode.
Lightning Protection
For added protection of the TV during a lightning storm or when it is left unattended or unused for long
periods of time, unplug the TV from the wall outlet and disconnect the antenna or cable system.
Power Lines
Do not locate the antenna near overhead light or power circuits, or where it could fall into such power
lines or circuits.
Remember, the screen of the coaxial cable is intended t o be connected to earth in the building
installation.
Version 7/22/2008 3
www.VIZIO.com
VIZIO VO22L HDTV10A User Manual
Opening the Package
Your VIZIO VO22L HDTV10A and it accompanying accessories are carefully packed in a cardboard
carton that has been designed to protect it from transportation damage. Now you have opened the carton
check that the VO22L HDTV10A is in good condition and that all of the accessories are included.
The VO22L HDTV10A weighs approximately 15lb and is about 21” wide; please exercise care when
unpacking the HDTV.
The screen can easily be scratched or broken so please handle the product gently and never pl ace the
HDTV with the glass facing downwards on a surface without protective padding.
IMPORTANT: Save the carton and packing material for future shipping.
Package Contents
VIZIO VO22L HDTV10A
VIZIO Remote Control VR3
VIZIO TV Stand
Power Cord
VIZIO Bezel and Screen Cleaning Cloth
This User Manual
Quick Setup Guide
Registration Card
VIP Services Brochure
2 (Double A) Batteries for the Remote Control
VIZIO Warranty and Repair Information
HDMI Cable
Version 7/22/2008 4
www.VIZIO.com
VIZIO VO22L HDTV10A User Manual
Additional Certified Accessories for the VIZIO VO22L HDTV10A are sold
separately
Wall Mounts
High Definition Cables
Extra or replacement Remote
VIZIO also offers Installation Services and Extended Warranty Services for your VIZIO VO22L HDTV10A
To purchase or inquire about additional accessor ies and services for your VIZIO product, visit our web
site at www.VIZIO.com
or call us toll free at 888-VIZIOCE (888-849-4623)
Installation Preparation
Please read this user manual carefully before installing your VIZIO HDTV.
The power consumption of the TV is up to 80W, please use the power cord designated for TV. When an
extension cord is required, use one with the correct power rating. The cord must b e grounded and the
grounding feature must not be defeated.
The TV should be installed on a flat surface to avoid tipping. For pro per ventilatio n, you must allo w space
between the back of the TV and the wall. If you would like to mount your TV on the wall, please see
below ‘Preparing Your LCD HDTV for Wall Mounting’ for additional information. Avoid installing the TV in
places with high humidity, dust or smoke so as not to shorten the service life of the electronic components.
Install the TV in landscape orientation; any 90˚ clockwise or counter-clockwise installation may induce
poor ventilation and excessive component damage.
VIZIO offers professional installation services. Please contact VIZIO for more information on these
services at 888-VIZIOCE (888-849-4623) or www.VIZIO.com
.
Version 7/22/2008 5
www.VIZIO.com
VIZIO VO22L HDTV10A User Manual
Installation Procedures
Open the package, retrieve and inspect contents.
Remove the Protective Bag from the TV and the stand.
The VIZIO VO22L HDTV10A can either be kept on the stand base or mounted on the wall for viewing. If
you choose to mount the VO22L HDTV10A on the wall, please refer to “preparing your LCD HDTV for
wall mounting” on page 8. Otherwise please read below for putting it on a stand base.
Version 7/22/2008 6
www.VIZIO.com
Preparing Your LCD HDTV to put on Stand Base
Place the base stand upright on a flat surface with
the VIZIO logo facing forward.
Place the TV over the stand while ensuring the
screen and the logo on the base stand is facing the
same direction.
Match up the spring loaded clips on the base stand
to the clip holders on the bottom of the TV. Slowly
slide the two together until you hear the c licking
sound of the clips falling into place. This process
must be handled with care to prevent physical
damage to the unit.
The TV and Base Stand is assembled as shown in the picture below
VIZIO VO22L HDTV10A User Manual
Version 7/22/2008 7
www.VIZIO.com
VIZIO VO22L HDTV10A User Manual
Preparing Your LCD HDTV for Wall Mounting
To remove the stand base
1. Unplug all of the cables and cords
from your VO22L HDTV10A.
2. Place the VO22L HDTV10A face
down on a soft and flat surface
(blanket, foam, cloth, etc) to prevent
any damage to the TV.
3. Push up the plastic panel on the back
of the stand and lift it away once to
release.
4. Remove the four (4) screws that were
hidden by the panel, while holding the
base.
5. Carefully remove the stand base.
Now, the VO22L HDTV10A can fit securely to
a mount (sold separately) by utilizing the
mounting holes in the center of the back panel
of the TV. Please make sure to read the
instructions of your specific mount to properly
hang the VO22L HDTV10A.
The pitch of the mounting holes is 100mm
horizontally and 100mm vertically.
The screw type required is metric M4, 1.25mm
pitch. The length of the screws will depend on
the thickness plate being attached to TV set,
our brackets come with different length
screws.
To find the perfect mount for the VIZIO VO22L HDTV10A, browse VIZIO’s certified mo unt selection at
www.VIZIO.com
or call directly 888-VIZIOCE (888-849-4623).
Version 7/22/2008 8
www.VIZIO.com
VIZIO VO22L HDTV10A User Manual
Disassembling Your LCD HDTV
If you want to transport your VO22L HDTV, it is recommended that you disassemble the TV from the base
stand and put the contents back into the original box. Please follow the instructions below to disassemble
your VO22L HDTV.
1. Familiarize with the base design as show below. These are two points where squeezing pressure
must be applied.
2. Place the TV face down on a soft (blanket, foam, cloth, etc.) flat surface to prevent any damage
to the unit, making sure that the screen is resting well on the surface so that there is not an
uneven pressure. Let the base hangs at the edge of the flat surface, as shown below; to make it
easier to detach it from the TV.
3. Applying enough squeezing pressure at these two points will release the clips from the locking
position, making it smoother to separate the base from the TV.
Note:
If you choose to wall mount the TV, please follow the instructions or steps under such
topic in the User’s Manual.
Version 7/22/2008 9
www.VIZIO.com
VIZIO VO22L HDTV10A User Manual
Table of Contents
Chapter 1 Basic Controls and Connections ............................................12
1.1 Front Panel ........................................................................................................................................................ 12
1.2 Side Panel Controls ........................................................................................................................................... 12
1.3 Rear Panel Connections ................................................................................................................................... 13
1.4 Right-Side Panel Connection ............................................................................................................................ 14
1.5 VIZIO Remote Control ....................................................................................................................................... 15
1.5.1 Insertion of Batteries in the Remote Control .............................................................................................. 16
1.5.2 Remote Control Range .............................................................................................................................. 16
1.5.3 VIZIO Universal Remote Control Precautions ........................................................................................... 16
Chapter 2 Connecting Equipment .... ........................... .......................17
2.1 Which Video Connection Should I Use? ............................................................................................................ 17
2.2 Connecting Coaxial (RF) ................................................................................................................................... 18
2.2.1 Using Your Antenna or Digital Cable for DTV ............................................................................................ 18
2.2.2 Using the Antenna or Cable through your VCR ......................................................................................... 18
2.3 Connecting Your HDTV Set-Top Box ................................................................................................................ 19
2.3.1 Using HDMI Input ...................................................................................................................................... 19
2.3.2 Using Component Video ............................................................................................................................ 21
2.4 Connecting Your Basic Set-Top Box ................................................................................................................. 22
2.4.1 Using Composite Video ............................................................................................................................. 22
2.4.2 Using Coax (RF) ........................................................................................................................................ 22
2.5 Connecting Your DVD Player ............................................................................................................................ 23
2.5.1 Using HDMI Input ...................................................................................................................................... 23
2.5.2 Using Component Video ............................................................................................................................ 25
2.5.3 Using S-Video (AV/S-VIDEO) .................................................................................................................... 26
2.5.4 Using Composite (AV) Video Input ............................................................................................................ 26
2.6 Connecting Your VCR or Video Camera .......................................................................................................... 27
2.7 Connecting an external Receiver/Amp .............................................................................................................. 28
2.7.1 Optical Output of Audio received with HD Programs ................................................................................. 28
2.8 Connecting a PC Computer .............................................................................................................................. 29
2.8.1 Preset PC Resolutions ............................................................................................................................... 30
Chapter 3 Setting Up to Watch Television ............................................31
3.1 Basic LCD HDTV Start Up ................................................................................................................................ 31
3.2 Watching a TV Program .................................................................................................................................... 36
3.3 Adjusting Basic HDTV Settings ......................................................................................................................... 37
3.4 Program Information .......................................................................................................................................... 38
3.5 Information on HDTV Status ............................................................................................................................. 38
Chapter 4 Advanced Adjustment of HDTV ...............................................39
4.1 Using the On Screen Display (OSD) ................................................................................................................. 39
4.2 DTV / TV Input Picture Adjustment .................................................................................................................... 40
4.2.1 Backlight .................................................................................................................................................... 41
4.2.2 Brightness .................................................................................................................................................. 41
4.2.3 Contrast ..................................................................................................................................................... 42
4.2.4 Color .......................................................................................................................................................... 42
4.2.5 Tint ............................................................................................................................................................. 42
4.2.6 Sharpness ................................................................................................................................................. 43
4.2.7 Color Temperature..................................................................................................................................... 43
4.2.8 Advanced Video ........................................................................................................................................ 44
4.3 DTV / TV Input Audio Adjustment...................................................................................................................... 46
4.3.1 Volume ...................................................................................................................................................... 46
4.3.2 Bass ........................................................................................................................................................... 46
4.3.3 Treble ........................................................................................................................................................ 47
4.3.4 Balance ...................................................................................................................................................... 47
4.3.5 Surround .................................................................................................................................................... 47
4.3.6 Digital Audio Out ........................................................................................................................................ 47
4.3.7 Speakers ................................................................................................................................................... 48
4.3.8 Lip Sync ..................................................................................................................................................... 48
4.4 DTV / TV Tuner Setup ....................................................................................................................................... 49
4.4.1 Tuner Mode ............................................................................................................................................... 49
4.4.2 Auto Search ............................................................................................................................................... 49
4.4.3 Skip Channel ............................................................................................................................................. 49
Version 7/22/2008 10
www.VIZIO.com
VIZIO VO22L HDTV10A User Manual
4.4.4 MTS ........................................................................................................................................................... 50
4.4.5 Time Zone ................................................................................................................................................. 50
4.4.6 Daylight Saving .......................................................................................................................................... 50
4.5 DTV / TV Input Setup ........................................................................................................................................ 51
4.5.1 Language ................................................................................................................................................... 51
4.5.2 Sleep Timer ............................................................................................................................................... 51
4.5.3 Wide .......................................................................................................................................................... 51
4.5.4 Input Naming ............................................................................................................................................. 52
4.5.5 Analog Closed Caption .............................................................................................................................. 53
4.5.6 Closed Caption On Mute ........................................................................................................................... 53
4.5.7 Digital Closed Caption ............................................................................................................................... 53
4.5.8 Reset All Settings ...................................................................................................................................... 54
4.6 DTV / TV Input Parental Control ........................................................................................................................ 55
4.6.1 Channel Block ........................................................................................................................................... 55
4.6.2 TV Rating ................................................................................................................................................... 56
4.6.3 Movie Rating .............................................................................................................................................. 57
4.6.4 Check for New DTV Rating ........................................................................................................................ 57
4.6.5 Blocked Unrated Programming .................................................................................................................. 58
4.6.6 Change the Password ............................................................................................................................... 58
4.7 HDMI Input Picture Adjustment ......................................................................................................................... 59
4.8 HDMI Input Audio Adjustment ........................................................................................................................... 59
4.9 HDMI Input Setup .............................................................................................................................................. 59
4.10 Video Input Picture Adjustment ....................................................................................................................... 60
4.11 Video Input Audio Adjustment ......................................................................................................................... 60
4.12 Video Input Setup ............................................................................................................................................ 60
4.13 Video Input Parental Control ........................................................................................................................... 61
4.14 PC Input Picture Adjustment ........................................................................................................................... 61
4.14.1 Auto Adjust .............................................................................................................................................. 61
4.14.2 Backlight .................................................................................................................................................. 61
4.14.3 Brightness ................................................................................................................................................ 62
4.14.4 Contrast ................................................................................................................................................... 62
4.14.5 Color Temperature ................................................................................................................................... 62
4.14.6 H-SIZE ..................................................................................................................................................... 63
4.14.7 H. Position ........................................................... .................................................................................... 63
4.14.8 V. Position ..................... .................................................................................... ...................................... 63
4.14.9 Fine Tune ............................ .................................................................................................................... 64
4.15 PC Input Audio Adjustment ............................................................................................................................. 64
4.16 PC Input Setup ................................................................................................................................................ 64
4.17 Understanding Viewing Features .................................................................................................................... 65
4.17.1 Viewing Modes ........................................................................................................................................ 65
Chapter 5 Maintenance and Troubleshooting ...........................................66
5.1 Maintenance ...................................................................................................................................................... 66
5.2 Troubleshooting Guide ...................................................................................................................................... 66
5.3 Telephone & Technical Support ........................................................................................................................ 68
5.4 Compliance ....................................................................................................................................................... 69
5.5 FCC Class B Radio Interference Statement ...................................................................................................... 69
Chapter 6 Miscellaneous Information .................................................70
6.1 Specifications .................................................................................................................................................... 70
6.2 Glossary – Standard Definitions ........................................................................................................................ 71
6.3 Index ................................................................................................................................................................. 72
Version 7/22/2008 11
www.VIZIO.com
Chapter 1 Basic Controls and Connections
1.1 Front Panel
POWER ‘VIZIO’ LIGHT– The VIZIO name lights white when
powered on and orange when powered off.
REMOTE CONTROL SENSOR – This is the window
through which all of the remote control signals pass to the
sensor. Point the remote control directly at this window for
the best response to the remote signal.
1.2 Side Panel Controls
VIZIO VO22L HDTV10A User Manual
POWER ( ) – Switch the VO22L HDTV10A on by pressing
the button once. Press the button again to the VO22L
HDTV10A off.
MENU – This button activates the On Screen Display (OSD).
If a sub-menu is active, pressing this button will return to the
previous menu level.
CH + / - – Use these buttons to step up or down the TV
channels. While the OSD is active, these buttons function as
up and down controls in the OSD menus.
VOL + / - – Use these buttons
to increase or decrease to the
speaker volume. While the
OSD is active, these buttons
function as left and right
controls in the OSD menus.
INPUT (ENTER) – Repeated
pressing of this buttons steps
through the input sources in
the following sequence: TV,
AV/S-Video, Component,
RGB, HDMI 1 and HDMI 2.
Once you have stepped
through the entire sequence, you will return to the beginning.
Additionally, when the OSD is active, this button confirms the menu function to be adjusted. When the
OSD is not active, pressing this button will display the current input mode.
Version 7/22/2008 12
www.VIZIO.com
VIZIO VO22L HDTV10A User Manual
1.3 Rear Panel Connections
1
1. AC IN – Plug-in the supplied AC Power Cord here.
2. SERVICE – This custom communication port is for factory service only. Use of this input for
any purpose other than factory authorized service will void the manufacturer’s
warranty of this equipment.
3. HDMI 1 – Connect the primary source for digital video such as a DVD multimedia player or
set top box through this all digital connector. The white color ba nd on the rear of the TV
indicates this connection.
4. HDMI 2 – Connect a third source for digital video such as a DVD multimedia player or set top
box through this all digital connector. The white color band on the rear of the TV indicates
this connection. For users who want to con nect to a DVI enabled device, use a DVI-HDMI
cable and connect the Analog Audio output of the device to th e L+R AUDIO here. . Your
VIZIO Certified HDMI and HDMI-DVI cables are available for purchase fro m www.VIZIO.com
or by calling 888-VIZIOCE (888-849-4623).
5. RGB PC – Connect the video and audio from a computer here. The blue color band on the
rear of the TV indicates this connection. A 1/8” plug stereo cable is needed to connect the
audio out from the computer to the 1/8” jack connector in the rear of th e TV for audio from
computer.
6. COMPONENT (YPb/CbPr/Cr with Audio L/R) – Connect the sour ce for component video
devices such as a DVD Player or set top box here. From left to right, use green for Y, blue
for Pb (or Cb), red for Pr (or Cr), white for left audio and red for right audio inputs. The green
color band on the rear of the TV indicates this connection.
7. DTV – Connect to an antenna or digital cable (out-of-the-wall, not f rom Cable Box) for Digital
TV.*
8. AV/S-VIDEO IN – Connect the primary source for composite video devices, such as a VCR
or video game. Use the white and red connectors to connect th e external audio from the
same source, then use the S-Vide o or yellow connector to connect the external vid eo from
the same source. The S-Video, if connected, will take priority over AV RCA (yellow)
connector. The yellow color band on the rear of the TV indicates this connection.
9. OPTICAL DIGITAL AUDIO OUT – When a digital audio signal is associated with an input
which is selected for viewing, the digital audio associated with digital programming will be
available on this SPDIF Optical connector fo r connection to your h ome theatre system. The
white color band on the rear of the TV indicates this connection.
* For digital TV stations in your area visit www.antennaweb.org
3
2
4
5
6
8 9
.
7
Version 7/22/2008 13
www.VIZIO.com
VIZIO VO22L HDTV10A User Manual
1.4 Right-Side Panel Connection
1. HEADPHONE – Connect your headphone here for personalized
listening without disturbing others.
1
Version 7/22/2008 14
www.VIZIO.com
VIZIO VO22L HDTV10A User Manual
1.5 VIZIO Remote Control
GUIDE – This button displays program information. Press this button once when in TV mode and the
information of the program being viewed is shown. Press it a second time and the Electronic
Programming Guide will appear in the screen. In any other mode when this button is pressed, the screen
will display the selected input plus the definition of the signal; i.e. HDMI 720p, HDMI 1080i, etc.
POWER – Press this button to turn the TV on from the Standby mode. Press it again to return to the
Standby mode.
HDMI – Press this button to select the HDMI input.
MUTE – This button turns the sound on and off.
TV – Press this button to select TV.
COMPONENT – Press this button to select the Component (YPbPr) input.
LAST – This button recalls the previously viewed channel. If the On-
Screen Display (OSD) menu is being used, this button will allow you to get
back to previous menu screen or out to your program when you pr ess it
repeatedly.
AV – Press this button to select AV (either Composite or S-Video) input.
(MENU) – Use this button for the On-Screen Display (OSD) menu.
When it is used within a menu selection, the
make the selection of the feature to be adjusted after it has been
highlighted.
V ball key will help you to
-These labeled buttons are used to navigate the OSD menu. When
navigating the OSD menu, the arrows control the direction up and
down or left and right. They will also be used as value settings when
the slide bar is shown on the screen and option settings to turn a
feature off or on. During regular TV watching these keys will provide
us with the control functions of Volume (up or down) and Channel
(up or down). Channel up or down will not function when a cable box or
satellite receiver is being used as the source of the signal.
hen
NUMBER BUTTON PAD – Use these buttons to select a channel or enter
a password.
INPUT – This button allows the user to
cycle through the inputs. Repeatedly
pressing of this button will step you
through the input sources in the following
sequence: TV, AV/S-VIDEO, Component,
RGB, HDMI 1 and HDMI 2. Once you
have stepped through the entire
sequence, you will return to the beginning.
- (DASH) – When selecting a digital
channel directly use this button for the
separation of main and sub-channels.
For example, channel 28-2 would be
selected by the button sequence 2 8
ENTER 2.
Version 7/22/2008 15
www.VIZIO.com
VIZIO VO22L HDTV10A User Manual
1.5.1 Insertion of Batteries in the Remote Control
Insert two AA batteries into the remote control. Make sure that you match the (+) and (-) symbols on the
batteries with the (+) and (-) symbols inside the battery compartment. Re-attach the battery cover.
Precautionary Tips for Inserting the Batteries:
Only use the specified AA batteries.
Do not mix new and old batteries. This may result in cracking or leakage
that may pose a fire risk or lead to personal injury.
Inserting the batteries incorrectly may also result in cracking or leakage
that may pose a fire risk or lead to personal injury.
Dispose of the batteries in accordance with local laws an d regulations.
Keep the batteries away from children and pets.
1.5.2 Remote Control Range
Point the remote control at the remote control sensor to transmit the commands.
Do not place any obstacles between the remote control and the receiver window.
The effective range of the remote control is approximately 30 feet (10 meters) from the front of the
receiver window, 30° to the left and right, 20° up and d own.
1.5.3 VIZIO Universal Remote Control Precautions
The remote control should be kept dry and away from heat sources. Avoid humidity.
If the TV responds erratically to the remote control or d oes not respond at all, check the batte ries. If the
batteries are low or exhausted, replace them with fresh batteries.
When not using the remote control for a long period of time, remove the batteries.
Do not take the batteries apart, heat them, or throw them into a fire.
Do not subject the remote control to undue physical stress, such as striking or dropping it.
Do not attempt to clean the remote control with a volatile solvent. Wipe it with a clean, damp cl ot h.
Version 7/22/2008 16
www.VIZIO.com
VIZIO VO22L HDTV10A User Manual
Chapter 2 Connecting Equipment
2.1 Which Video Connection Should I Use?
The VIZIO VO22L HDTV10A has six different ways to connect your video equipment from a basic
connection to the most advanced for digital displays.
Connection
Quality
(type)
Best
(digital)
Best
(digital)
- - - - - - - -
- - - -
Good
(analog)
Best
(analog)
Better
(analog)
Connector
Rear
Panel
Color
Description
Codes
HDMI (High-Definition Multimedia Interface) - It is the first
and only industry-supported, uncompressed, all-digital
White
Black
Blue
Green
audio/video interface. HDMI provides an interface between
any audio/video source, such as a set-top box, DVD player,
or A/V receiver and an audio and/or video monitor, such as
a digital television (DTV), over a single cable.
DTV Coaxial RF. When used for MPEG2 encoded bit
streams from ATSC broadcast programming, this input
takes advantage of the High Definition content.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TV Coaxial RF. This is the connection for standard NTSC
TV using antenna or cable.
RGB PC (VGA) – This video input has separate red, green
and blue color components. The signal carries horizontal
and vertical sync information on the green signal. This is
most commonly used for PC input.
Component - The video signal is separated into three
signals, one containing the black-and-white information and
the other two containing the color information. This
enhancement over S-Video takes advantage of the superior
picture provided by progressive scan DVD players and
HDTV formats.
S-Video (AV) - The video signal is separated into two
signals, one containing the black-and-white information and
the other containing the color information. Separating the
color in this way avoids ‘cross color’ effects where closely
spaced black and white lines are erroneously displayed in
color. It also enables text to be displayed more sharply.
Composite (AV) - The complete video signal is carried
through this single pin connector. This is the most
commonly used video connection.
Good
(analog)
Yellow
and
Red
Note: For more info refer to the Quick Start Guide
Version 7/22/2008 17
www.VIZIO.com
VIZIO VO22L HDTV10A User Manual
2.2 Connecting Coaxial (RF)
2.2.1 Using Your Antenna or Digital Cable for DTV
1. Turn off the power to the HDTV.
2. Connect the coaxial (RF) connector from your antenna or digi tal cable (out-ofthe-wall, not from the Cable Box) to the DTV/TV CABLE/ANTENNA connector
on the rear of the HDTV.
3. Turn on the power to the HDTV.
4. Select DTV using the INPUT button on the remote or side of the HDTV, or
directly by pressing the TV button on the Remote Control.
Note:
a) Not all digital TV broadcasts are High Definition (HD). Refer to the
program guides, or consult your cable, satellite or TV station operator.
b) Digital broadcasts are not available in all areas. Refer to
www.antennaweb.org
c) Make sure the antenna and coaxial cable are correctly grounded.
d) For Professional antenna installation contact us at www.VIZIO.com
call 1-888-VIZIOCE (1-888-849-4623).
for detailed information.
or
2.2.2 Using the Antenna or Cable through your VCR
1. Turn off the power to the HDTV and VCR.
2. Connect the “Output to TV”, “RF Out” or “Antenna Out” connector on the rear of
your VCR to the DTV/TV CABLE/ANTENNA connector at the rear of the HDTV.
3. Turn on the power to the HDTV and VCR.
4. Select TV using the INPUT button on the remote or side of the HDTV, or directly
by pressing the TV button on the Remote Control.
Note: If you have an off-air antenna or cable TV, connect
it to the “Antenna In” connector on the rear of your VCR.
Version 7/22/2008 18
www.VIZIO.com
VIZIO VO22L HDTV10A User Manual
2.3 Connecting Your HDTV Set-Top Box
2.3.1 Using HDMI Input
HDTV Set-Top Boxes that have a HDMI digital inter face should be connected to the HDMI input of the
LCD HDTV for optimal results.
Connecting your HDTV Set-Top Box (Best):
Note: To maintain the display quality, use a VIZIO certified HDMI cable that is 10 meters.
See www.vizioce.com
1. Turn off the power to the HDTV and HDTV Set-Top Box.
2. Connect a H DMI cable to the HDMI output of your HDTV Set-Top Box and the other end to
the HDMI Input (white color area) at the rear of the HD TV .
3. Turn on the power to the HDTV and HDTV Set-Top Box.
4. Select HDMI using the INPUT button on the remote or side of the HDTV, or directly by
pressing the HDMI button on the Remote Control.
Note:
a) The HDMI input on the HDTV supports High-bandwidth Digital Content Protection (HDCP).
HDCP encrypts the transmission between the video source and the digital display for
added security and protection .
b) Refer to your HDTV Set-Top Box user manual for more information about the video
output requirements of the product or consult your cable or satellite operator.
or call 1-888-VIZIOCE (1-888-849-4623) for details.
Version 7/22/2008 19
www.VIZIO.com
VIZIO VO22L HDTV10A User Manual
For HDTV Set-Top Boxes with DVI:
1. Turn off the power to the HDTV and HDTV Set-Top Box.
2. Using a HDMI-DVI cable, connect the DVI end to you r HDTV Set-Top Box an d t he HDMI e nd
to the HDMI 2 Input (white color area) at the rear of the HDTV.
3. Using an audio cable (white and red connectors), connect the cable to the audio output
connectors associated with the DVI output on your HDTV Set-Top Box and connect the other
end to the audio connectors associated with the HDMI input (white ar ea) at the rear of the
HDTV.
4. Turn on the power to the HDTV and HDTV Set-Top Box.
5. Select HDMI 2 using the INPUT button on the remote or side of the HDTV, or directly by
pressing the HDMI button on the Remote Control.
Note:
a) The HDMI input on the HDTV supports High-bandwidth Digital Content Pro tection
(HDCP). HDCP encrypts the transmission between the video source and the
digital display for added security and protection.
b) Refer to your HDTV Set-Top Box user manual for more information about the
video output requirements of the product or consult your cable or satellite operator.
Version 7/22/2008 20
www.VIZIO.com
2.3.2 Using Component Video
Connecting your HDTV Set-Top Box (Better):
VIZIO VO22L HDTV10A User Manual
1. Turn off the power to the HDTV and HDTV Set-Top Box.
2. Connect the Y (green color) connector on your HDTV Set-Top Box to the corresponding Y
(green color) connector in the Component group (green color area - row of connectors
nearest to you when viewing from the rear of the TV) at the rear of the HDTV.
3. Connect the Pb (blue color) connector on your HDTV Set- Top Box to the corresponding Pb
(blue color) connector in the Component input (green color area - row of connectors nearest
to you when viewing from the rear of the TV) at the rear of the HDTV.
4. Connect the Pr (red color) connector on your HDTV Set-Top Box to the corresponding Pr (red
color) connector in the Component input (green color area - row of connectors nearest to you
when viewing from the rear of the TV) at the rear of the HDTV.
5. Using an audio cable (white and red connectors), connect the cable to the audio output
connectors associated with the Component output on your HDTV Set-Top Box and connect
the other end to the audio connectors associated with the Component input (green color
area) at the rear of the HDTV.
6. Turn on the power to the HDTV and HDTV Set-Top Box.
7. Select Component using the INPUT button on the remote or side of the HDTV, or directly by
pressing the Component button on the Remote Control.
Note:
Refer to your HDTV Set-Top Box user manual for more information about the
video output requirements of the product or consult your cable or satellite operator.
Version 7/22/2008 21
www.VIZIO.com
VIZIO VO22L HDTV10A User Manual
2.4 Connecting Your Basic Set-Top Box
2.4.1 Using Composite Video
1. Turn off the power to the HDTV and Set-Top Box.
2. Using the AV Cable, connect the Video (yellow color)
connector on your Set-Top Box to the corresponding
Video (yellow color) connector in the AV input (yellow
color area) at the rear of the HDTV.
3. Using the white and red connectors, connect the cable to the
audio output connectors associated with the Video output
on your Set-Top Box and connect the other e nd to the audio connectors associated with the
AV input (yellow color area) at the rear of the HDTV.
4. Turn on the power to the HDTV and Set-Top Box.
5. Select AV using the INPUT button on the remote or side of the HDTV, or directly by pressing
the AV button on the Remote Control.
2.4.2 Using Coax (RF)
1. Turn off the power to the HDTV and Set-Top Box.
2. Using a Coax ( RF) cable, connect one end to the TV OUT (RF) o n your Set Top Box
and the other end to the DTV/TV input at the rear of the HDTV.
3. Turn on the power to the HDTV and Set-Top Box.
4. Select TV using the INPUT button on the remote or side of the HDTV, or
directly by pressing the TV button on the Remote Control.
Note: Refer to your Set Top Box user manual for more information
about selecting the video or RF output of the product.
Version 7/22/2008 22
www.VIZIO.com
Loading...