Quick Setup Guide
Get easy setup videos and more.
Scan with your phone camera or QR reader.
• Plug in power cables to power on your sound bar and subwoofer.
1
• Use the included cables to connect the surround speakers to the subwoofer.
Connect.
2
• Then use the included HDMI cable to connect to your TV.
3
vizio.com/qr/V51x-J6
Place subwoofer and
surround speakers
in the rear of the room.
HDMI ARC
(to TV)
Why HDMI? Highest Quality Connection.
Connect to the HDMI ARC/eARC port on your TV
for the best possible sound quality.
HDMI (ARC or eARC)
Connect to a Voice Assistant (VA) device.
Connect your voice assistant devices (sold separately) to the sound bar for an amplied audio
experience that’s always ready to respond. Please see the User Manual for more information.
Connect to the AUX VA port
Bluetooth Connection
OR
Unlock the best picture and audio quality
with a VIZIO SmartCast® TV.
Scan here to shop our V-series™ TVs:
The sound bar will automatically lower the
volume while watching a movie or listening
to music (when a VA device is connected).
More questions?
Get customer support help
and view the User Manual here:
support.vizio.com
FAQs
Best speaker placement for my sound bar?
For the best surround sound experience, position the sound
bar, subwoofer, and surround sound speakers as shown.
The sound bar should be close to ear level.
If the subwoofer is too boomy or lacking impact, adjust
the Subwoofer level with your remote control or try
various placements.
Not enough space? Try Front Surround Mode.
In rooms where ideal placement of the surround sound
speakers is not practical, you can also place the sound bar,
subwoofer, and surround sound speakers as shown. Front
Surround Mode will utilize DTS Virtual:X to produce a virtual
surround sound experience.
To use this placement, set the Surround Sound mode
(SURND) on the remote to FRNT.
How do I adjust sound settings and levels?
Using the included remote, you can easily adjust many different sound settings
and levels to optimize your listening experience, including surround volume level,
surround speaker balance, surround sound modes, and more.
1. Push a setting button.
2. Use the Up/Down buttons to select a specic setting/level to change.
3. Then use the Left/Right buttons to adjust each setting.
Loading...