VIZIO E50-C1, E55-C1 Quick Start Guide
VIZIO
QUICK START GUIDE
Models E50-C1 and E55-C1
IMPORTANT SAFETY INSTRUCTIONS
Your TV is designed and manufactured to operate within dened design limits. Misuse may result in electric shock
or re. To prevent your TV from being damaged, the following instructions should be observed for the installation,
use, and maintenance of your TV. Read the following safety instructions before operating your TV. Keep these
instructions in a safe place for future reference.
• To reduce the risk of electric shock or component damage, switch o the power before connecting other
components to your TV.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
ampliers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the provided plug does not t into your outlet, consult an
electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
• Only use attachments/accessories specied by the manufacturer.
• Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury
from tip-over.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged
in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped.
• Unplug the power cord before cleaning your TV.
• When moving your TV from an area of low temperature to an area of high temperature, condensation may
form in the housing. Wait before turning on your TV to avoid causing re, electric shock, or component damage.
• A distance of at least three feet should be maintained between your TV and any heat source, such as a radiator,
heater, oven, amplier etc. Do not install your TV close to smoke. Operating your TV close to smoke or moisture
may cause re or electric shock.
• Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable
operation of your TV and to protect it from overheating, be sure these openings are not blocked or covered. Do
not place your TV in a bookcase or cabinet unless proper ventilation is provided.
• Never push any object into the slots and openings on your TV cabinet. Do not place any objects on the top of your
TV. Doing so could short circuit parts causing a re or electric shock. Never spill liquids on your TV.
• Your TV should be operated only from the type of power source indicated on the label. If you are not sure of the
type of power supplied to your home, consult your dealer or local power company.
• Do not apply pressure or throw objects at your TV. This may compromise the integrity of the display. The
manufacturer’s warranty does not cover user abuse or improper installations.
• The power cord must be replaced when using dierent voltage than the voltage specied. For more information,
contact your dealer.
• When connected to a power outlet, power is always owing into your TV. To totally disconnect power, unplug
the power cord.
• The lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the
presence of un-isolated, dangerous voltage within the inside of your TV that may be of sucient magnitude to
constitute a risk of electric shock to persons.
• Do not overload power strips and extension cords. Overloading can result in re or electric shock.
• The wall socket should be installed near your TV and easily accessible.
• Only power of the marked voltage can be used for your TV. Any other voltage than the specied voltage may
cause re or electric shock.
• Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during
electrical storms.
• Unplug your TV during a lightning storm or when it will not be used for long period of time. This will protect your
TV from damage due to power surges.
• Do not attempt to repair or service your TV yourself. Opening or removing the back cover may expose you to
high voltages, electric shock, and other hazards. If repair is required, contact your dealer and refer all servicing
to qualied service personnel.
• WARNING: Keep your TV away from moisture. Do not expose your TV to rain or moisture. If water penetrates
into your TV, unplug the power cord and contact your dealer. Continuous use in this case may result in re or
electric shock.
• Do not use your TV if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord
and contact your dealer immediately. Do not try to repair your TV yourself.
• Avoid using dropped or damaged appliances. If your TV is dropped and the housing is damaged, the internal
components may function abnormally. Unplug the power cord immediately and contact your dealer for repair.
Continued use of your TV may cause re or electric shock.
• Do not install your TV in an area with heavy dust or high humidity. Operating your TV in environments with
heavy dust or high humidity may cause re or electric shock.
• Follow instructions for moving your TV. Ensure that the power cord and any other cables are unplugged before
moving your TV.
• When unplugging your TV, hold the AC/DC power adapter, not the cord. Pulling on the power cord may damage
the wires inside the cord and cause re or electric shock. When your TV will not be used for an extended period
of time, unplug the power cord.
• To reduce risk of electric shock, do not touch the connector with wet hands.
• Insert batteries in accordance with instructions. Incorrect polarities may cause the batteries to leak which can
damage the remote control or injure the operator. Do not expose batteries to excessive heat such as sunshine,
re or the like.
• If any of the following occurs, contact the dealer:
- The power cord fails or frays.
- Liquid sprays or any object drops into your TV.
- Your TV is exposed to rain or other moisture.
- Your TV is dropped or damaged in any way.
- The performance of your TV changes substantially.
• This apparatus shall not be exposed to dripping or splashing and no objects lled with liquids, such as vases,
shall be placed on the apparatus.
• The mains plug or appliance coupler is used as the disconnect device, the disconnect device shall remain
readily operable.
• CAUTION - These servicing instructions are for use by qualied service personnel only. To reduce the risk of
electric shock, do not perform any servicing other than that contained in the operating instructions unless you
are qualied to do so.
• The lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user
to the presence of uninsulated DANGEROUS VOLTAGE within the product’s enclosure that may be of
sucient magnitude to constitute a risk of electrical shock to persons.
This product qualies for ENERGY STAR in the “factory default” setting and
this is the setting in which power savings will be achieved. Changing the
factory default picture settings or enabling other features will increase
power consumption that could exceed the limits necessary to qualify for
ENERGY STAR rating. For more information on the ENERGY STAR program,
refer to energystar.gov.
h
TELEVISION ANTENNA CONNECTION PROTECTION
Ground Clamp
Electric Service Equipment
• If an outside antenna/satellite dish or cable system is to be connected to the
TV, make sure that the antenna or cable system is electrically grounded to
provide some protection against voltage surges and static charges.
• Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides
information with regard to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna discharge unit, size of
the grounding conductors, location of antenna discharge unit, connection to
grounding electrodes, and requirements of the grounding electrode.
Antenna Lead In Wire
Antenna Discharge Unit
(NEC Section 810-20)
Grounding Conductors
(NEC Section 810-21)
Ground Clamps
Power Service Grounding Electrode System
(NEC ART 250, part H)
• Lightning Protection: For added protection of the TV during a lightning storm
or when it is left unattended or unused for long periods of time, unplug the TV
from the wall outlet and disconnect the antenna or cable system.
• Power Lines: Do not locate the antenna near overhead light or power circuits,
or where it could fall into such power lines or circuits. Remember, the screen
of the coaxial cable is intended to be connected to earth in the building
installation.
Take a moment to register your product at
VIZIO.COM/PRODUCT-REGISTRATION
Why register?
Customized Support
Get assistance quickly with your information on hand.
News and Oers
Take advantage of the latest news and special oers from VIZIO.
Safety and Satisfaction
Stay up-to-date with important product updates and notications.
REGISTER YOUR VIZIO PRODUCT NOW
Do you have questions? Find answers at
SUPPORT.VIZIO.COM
Find help with:
• New product setup
• Connecting your devices
• Technical problems
• Product updates and more
Live chat
support available
You can also contact our
award-winning support team at:
Phone:
Email:
Hours of Operation:
Monday - Friday: 7 am to 11 pm (CSt)
Saturday - Sunday: 9 am to 6 pm (CSt)
Se habla Español • Nous parlons Français
(877) 698-4946 (toll-free)
techsupport@VIZIo.com
PACKAGE CONTENTS
VIZIO LED HDTV
TV Stands
Power Cable
This Quick Start GuideRemote Control
with Batteries
E50-C1: 4 x M4 28 mm Phillips Screws
or
E55-C1: 4 x M4 26.5 mm Phillips Screws
USING THE REMOTE
Change the currently-displayed input.
INPUT
A/V CONTROLS
Control USB media player and some apps.
CLOSED CAPTIONS
Open the closed caption menu.
EXIT
Close the on-screen menu.
OK
Select the highlighted menu option.
BACK
Go to the previous on-screen menu.
VOLUME UP/DOWN
Increase or decrease loudness of the audio.
MUTE
Turn the audio o or on.
WIDE
Change the display mode.
NUMBER PAD
Manually enter a channel.
ENTER
Conrm channel or passcode
entered using the number pad.
Quickly launch the pictured App.
APP LAUNCHER
(Also turns the TV on if it is o.)
POWER
Turn TV on or o.
MENU
Display the on-screen menu.
INFO
Display the info window.
ARROW
Navigate the on-screen menu.
GUIDE
Display the info window.
V BUTTON
Open the VIA dock.
CHANNEL UP/DOWN
Change the channel.
LAST
Return to the channel last viewed.
PIC
Opens the picture mode menu.
DASH
Use with number pad to manually
enter a digital sub-channel.
(For example, 18-4 or 18-5.)
INSTALLING THE BASE
1
It is recommended that two people take part in the stand installation
Remove any plastic wrapping from the TV and stand.
Place the TV screen-down on a clean, at surface. To prevent scratches or damage to the screen, place the
TV on a soft surface such as a carpet, rug, or blanket, and avoid any sharp edges.
Loading...