This product qualies for ENERGY STAR in the “factory
®
default” setting and this is the setting in which power
savings will be achieved. Changing the factory default
picture settings or enabling other features will increase
power consumption that could exceed the limits necessary
to qualify for ENERGY STAR rating.
SRS TruSurround HD and SRS TruVolume are trademarks
of SRS Labs, Inc. TruSurround HD and TruVolume
technologies are incorporated under license from SRS
Labs, Inc.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
HDMI, the HDMI logo and High-Denition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
Welcome
Thank You for Choosing VIZIO
And congratulations on your new VIZIO HDTV.
To get the most out of your new VIZIO product, read these instructions before
using your product and retain them for future reference. Be sure to inspect the
package contents to ensure there are no missing or damaged parts.
Product Registration
To purchase or inquire about accessories and installation services for your VIZIO
product, visit our website at www.VIZIO.com or call toll free at 1-888-849-4623.
We recommend that you either:
• Register your VIZIO product at www.VIZIO.com
• Complete and mail the enclosed registration card
Extended Warranties
For peace of mind, and to protect your investment beyond the standard warranty,
VIZIO offers on-site extended warranty service plans. These plans provide
additional coverage during the standard warranty period. To purchase an extended
warranty service plan, visit www.VIZIO.com.
When Reading this Manual
When you see this symbol, please read the accompanying important
warning or notice. It is intended to alert you to the presence of
important operating instructions.
My Product Information
Enter your product information here for easy reference:
Model Number:
Serial Number:
Date of Purchase:
VIZIO recommends you attach your sales receipt to this manual for safekeeping.
When you see this symbol, please read the accompanying helpful
tip.
Attach Sales Receipt Here
E470VLE
Important Safety Instructions
Your TV is designed and manufactured to operate within defined design limits.
Misuse may result in electric shock or fire. To prevent your TV from being
damaged, the following instructions should be observed for the installation,
use, and maintenance of your TV. Read the following safety instructions before
operating your TV. Keep these instructions in a safe place for future reference.
• To reduce the risk of electric shock or component damage, switch off
the power before connecting other components to your TV.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including ampliers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the
provided plug does not t into your outlet, consult an electrician for
replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched, particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
• Only use attachments/accessories specied by the manufacturer.
• Use only with the cart, stand, tripod, bracket, or table
specied by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
• Unplug this apparatus during lightning storms or when unused for long
periods of time.
• Refer all servicing to qualied service personnel. Servicing is required
when the apparatus has been damaged in any way, such as when
the power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally or has been dropped.
• Unplug the power cord before cleaning your TV.
• When moving your TV from an area of low temperature to an area of
high temperature, condensation may form in the housing. Wait before
turning on your TV to avoid causing re, electric shock, or component
damage.
• A distance of at least three feet should be maintained between your TV
and any heat source, such as a radiator, heater, oven, amplier etc. Do
not install your TV close to smoke. Operating your TV close to smoke
or moisture may cause re or electric shock.
• Slots and openings in the back and bottom of the cabinet are provided
for ventilation. To ensure reliable operation of your TV and to protect it
from overheating, be sure these openings are not blocked or covered.
Do not place your TV in a bookcase or cabinet unless proper ventilation
is provided.
• Never push any object into the slots and openings on your TV cabinet.
Do not place any objects on the top of your TV. Doing so could short
circuit parts causing a re or electric shock. Never spill liquids on your
T V.
• Your TV should be operated only from the type of power source
indicated on the label. If you are not sure of the type of power supplied
to your home, consult your dealer or local power company.
• Do not apply pressure or throw objects at your TV. This may
compromise the integrity of the display. The manufacturer’s warranty
does not cover user abuse or improper installations.
• The power cord must be replaced when using different voltage than the
voltage specied. For more information, contact your dealer.
• Your TV is equipped with a three-pronged grounded plug (a plug with
a third grounding pin). This plug will t only into a grounded power
outlet. This is a safety feature. If your outlet does not accommodate the
three-pronged, have an electrician install the correct outlet, or use an
adapter to ground your TV safely. Do not defeat the safety purpose of
the grounded plug.
• When connected to a power outlet, power is always owing into your
TV. To totally disconnect power, unplug the power cord.
• The lightning ash with arrowhead symbol within an equilateral triangle
is intended to alert the user to the presence of un-isolated, dangerous
voltage within the inside of your TV that may be of sufcient magnitude
to constitute a risk of electric shock to persons.
E470VLE
• Do not overload power strips and extension cords. Overloading can
result in re or electric shock.
• The wall socket should be installed near your TV and easily accessible.
• Only power of the marked voltage can be used for your TV. Any other
voltage than the specied voltage may cause re or electric shock.
• Do not touch the power cord during lightning. To avoid electric shock,
avoid handling the power cord during electrical storms.
• Unplug your TV during a lightning storm or when it will not be used
for long period of time. This will protect your TV from damage due to
power surges.
• Do not attempt to repair or service your TV yourself. Opening or
removing the back cover may expose you to high voltages, electric
shock, and other hazards. If repair is required, contact your dealer and
refer all servicing to qualied service personnel.
• WARNING: Keep your TV away from moisture. Do not expose your TV
to rain or moisture. If water penetrates into your TV, unplug the power
cord and contact your dealer. Continuous use in this case may result in
re or electric shock.
• Do not use your TV if any abnormality occurs. If any smoke or odor
becomes apparent, unplug the power cord and contact your dealer
immediately. Do not try to repair your TV yourself.
• Avoid using dropped or damaged appliances. If your TV is dropped
and the housing is damaged, the internal components may function
abnormally. Unplug the power cord immediately and contact your
dealer for repair. Continued use of your TV may cause re or electric
shock.
• Do not install your TV in an area with heavy dust or high humidity.
Operating your TV in environments with heavy dust or high humidity
may cause re or electric shock.
• Follow instructions for moving your TV. Ensure that the power cord and
any other cables are unplugged before moving your TV.
• When unplugging your TV, hold the AC/DC power adapter, not the
cord. Pulling on the power cord may damage the wires inside the cord
and cause re or electric shock. When your TV will not be used for an
extended period of time, unplug the power cord.
• To reduce risk of electric shock, do not touch the connector with wet
hands.
• Insert batteries in accordance with instructions. Incorrect polarities may
cause the batteries to leak which can damage the remote control or
injure the operator. Do not expose batteries to excessive heat such as
sunshine, re or the like.
• If any of the following occurs, contact the dealer:
- The power cord fails or frays.
- Liquid sprays or any object drops into your TV.
- Your TV is exposed to rain or other moisture.
- Your TV is dropped or damaged in any way.
- The performance of your TV changes substantially.
• This apparatus shall not be exposed to dripping or splashing and
no objects ll with liquids, such as vases, shall be placed on the
apparatus.
• The mains plug or appliance coupler is used as the disconnect device,
the disconnect device shall remain readily operable.
• CAUTION - These servicing instructions are for use by qualied service
personnel only. To reduce the risk of electric shock, do not perform any
servicing other than that contained in the operating instructions unless
you are qualied to do so.
The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated DANGEROUS
h
VOLTAGE within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electrical shock to persons.
E470VLE
Television Antenna Connection Protection
If an outside antenna/satellite dish or cable system is to be connected to the TV,
make sure that the antenna or cable system is electrically grounded to provide
some protection against voltage surges and static charges.
Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information
with regard to proper grounding of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of the grounding conductors,
location of antenna discharge unit, connection to grounding electrodes, and
requirements of the grounding electrode.
Lightning Protection
For added protection of the TV during a lightning storm or when it is left
unattended or unused for long periods of time, unplug the TV from the wall outlet
and disconnect the antenna or cable system.
Power Lines
Do not locate the antenna near overhead light or power circuits, or where it could
fall into such power lines or circuits. Remember, the screen of the coaxial cable is
intended to be connected to earth in the building installation.
Ground Clamp
Antenna Lead In Wire
DTV Transition Advisory
The nationwide switch to digital television broadcasting was complete on June
12, 2009. Analog-only television sets that receive TV programming through an
antenna now need a converter box to continue to receive over-the-air TV. Watch
your local stations to find out when they will turn off their analog signal and switch
to digital-only broadcasting. Analog-only TVs should continue to work as before
to receive low power, Class A or translator television stations and with cable and
satellite TV services, gaming consoles, VCRs, DVD players, and similar products.
For additional information, please contact the parties listed below, as appropriate:
FCC (US Federal Communications Commission)
Web: www.fcc.gov
Phone: 1-888-CALL-FCC (1-888-225-5322)
TTY: 1-888-TELL-FCC (1-888-835-5322)
Fax: 1-866-418-0232
E-mail: fccinfo@fcc.gov
NTIA (National Telecommunications and Information Administration)
Web: www.ntia.doc.gov
Phone: 1-888-DTV-2009 (1-888-388-2009)
List of US Television Stations: www.high-techproductions.com/usTVstations.htm
Electric Service Equipment
Antenna Discharge Unit
(NEC Section 810-20)
Grounding Conductors
(NEC Section 810-21)
Ground Clamps
Power Service Grounding Electrode System
(NEC ART 250, part H)
Your TV comes with a built-in tuner capable of processing digital
broadcasts. No extra converter box is needed.
Table of Contents
Installing the TV ....................................................................... 1
Inspecting the Package Contents ........................................................... 1
Installing the TV ....................................................................................... 1
Installing the TV Base .......................................................................... 1
Installing the TV on a Wall .................................................................... 2
Controls and Connections ........................................................3
FCC Class B Radio Interference Statement ........................................ 34
Open Source Software Notice ............................................................. 34
Installing the TV
1
Inspecting the Package Contents
Before installing your new TV, take a moment to inspect the package contents.
Use the images below to ensure nothing is missing or damaged.
When you have completed your inspection, install the TV.
VIZIO LCD HDTV with Base
Installing the TV
After removing the TV from the box and inspecting the package contents you can
begin installing the TV. Your TV can be installed in two ways:
• On a at surface, using the included stand
• On a wall, using a VESA-standard wall mount (not included)
Installing the TV Base
Your TV includes a base designed to support the weight of the TV and keep it from
falling over. However, the TV can still fall over if:
• It is placed on an uneven, unstable, or non-level surface
• It is pushed, pulled, or otherwise improperly moved
• If an earthquake occurs and the TV is not properly secured
To install the TV stand:
1. Place the TV screen-down on a clean,
flat surface. To prevent scratches or
damage to the screen, place the TV on
a soft surface, such as carpet, rug, or
blanket.
User Manual and
Quick Start Guide
Cleaning Cloth
Remote Control with
Batteries
Power CordSafety Cable
Package Contents
2. Align the stand with the holes on the
back of the TV.
1
1
E470VLE
Screw Size:M6
Screw Length:20mm
Screw Pitch:1.0mm
Hole Pattern:200mm (V) x 400mm (H)
E470VLE
3. Using a Phillips-head screwdriver,
attach the base to the TV by inserting
and tightening the included screws.
4. Move the TV with attached stand into
an upright position and place on a flat,
level, and stable surface.
5. To ensure proper ventilation, leave at
least 1” of space between the back of
the TV and any other objects (walls,
etc).
Installing the TV on a Wall
To mount your TV on a wall, you will need a wall mount. Consult the information
below to find the appropriate mount for your TV model:
Installing a TV on a wall requires lifting. To prevent injury or damage
to the TV, ask someone to help you.
2
1”
Be sure the mount you choose is capable of supporting the weight of the TV. After
you have determined that you have the correct mount for your TV, you can begin
the installation.
To install your TV on a wall:
1. Disconnect any cables connected to
your TV.
2. Place the TV face-down on a clean,
flat, stable surface. Be sure the surface
is clear of debris that can scratch or
damage the TV.
3. Using a Phillips-head screwdriver,
remove the base by loosening and
removing the screws.
4. Attach your TV and wall mount to the
wall, carefully following the instructions
that came with your mount.
Use only with a UL-listed wall
mount bracket rated for the weight/
load of this TV. See
Specifications
Appendix A -
for the weight of this TV.
Controls and Connections
2
Rear Panel
HDMI (1, 2)
PC Audio In
RGB PC
RCA Audio In
(For use with
HDMI ports)
Composite AV
Component
Cable/Antenna
RCA Audio Out
Optical
Audio Out
RGB PC: Connect RGB cable from computer.
PC Audio In: Connect 3.5mm connector from computer.
RCA Audio Out: Connect RCA audio device (soundbar, home theater,
etc).
Component: Connect component video/audio device.
RCA Audio In: Connect audio for an HDMI input.
HDMI (1,2): Connect HDMI devices.
DC IN: Connect the included power adapter.
AC IN
Rear Panel
3
2
E470VLE
Front Panel
Remote Control
Sensor
Front Panel
Remote Control Sensor: When using the remote, point it directly at this
sensor.
Left Side Panel
Power
Menu
Channel Up
Channel Down
Volume Up
Volume Down
Input
USB
Left Side Panel
Power: Turn the TV on. Press and hold for 3 seconds to turn
off.
Menu: Display on-screen menu.
Channel Up/Down: Change the channel.
Volume Up/Down: Increase or decrease the loudness of the TVs audio.
Input: Change the input device. With each press of the
button, the TV will display a different input source
USB: Connect a USB drive to play music or photos.
4
E470VLE
Remote Control
Exit
OK
Back
Media
Volume
Up/Down
Mute
Input
Power/Standby
A/V Controls
Menu
Arrow
Guide
Channel
Up/Down
Last
Input Shortcuts
Number Pad
Dash (-)
Power/Standby: Turn the TV on or off.
Input: Change the input device. With each press of the
button, the TV will display a different input.
A/V Controls: Control external device (Blu-Ray or DVD player).
Menu: Display the on-screen menu.
Exit: Close the on-screen menu.
Arrow: Navigate the on-screen menu and episode guide.
OK: Select highlighted menu option.
Back: Go to the previous on-screen menu options.
Guide: Display the episode guide (digital channels only).
Using the Digital Episode Guide
See
26.
Volume Up/Down: Increase or decrease the loudness of the TV’s
audio.
Channel Up/Down: Change the channel. With each press of the but-
ton, the channel will increase or decrease by one.
Mute: Turn the sound off or on. When mute is activated,
the TV’s audio is turned off.
Last: Return to the channel last viewed.
Input Shortcuts: Select the input you want to view.
Number Pad: Use the number pad to manually enter a channel.
Dash (-): Use with number pad to manually enter a digital
sub-channel. (For example, 18-4 or 18-5.)
on page
2
Remote Control
Replacing the Batteries
1. Open the battery cover.
2. Insert two AA batteries into the remote
control. Make sure that the (+) and (-)
symbols on the batteries match the
(+) and (-) symbols inside the battery
compartment.
3. Close the battery cover.
5
2
E470VLE
• Use only good quality batteries.
• Inserting the batteries incorrectly may result in cracking or leakage
that may cause a fire or result in injury.
• Dispose of old or dead batteries in accordance with local hazardous
waste regulations.
• Keep batteries away from children and pets.
6
Loading...
+ 30 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.