Vizio E43U-D2, E48U-D0, E55U-D2, E60U-D3, E65U-D3 User Manual

...

USER MANUAL

E43u-D2, E48u-D0, E50u-D2, E55u-D0, E55u-D2, E60u-D3, E65u-D3, & E70u-D3

Safety Information



IMPORTANT SAFETY INSTRUCTIONS - EU-SERIES DISPLAYS

Your Display is designed and manufactured to operate within dened design limits. Misuse may result in electric shock or re. To prevent your Display from being damaged, the following instructions should be observed for the installation, use, and maintenance of your Display. Read the following safety instructions before operating your Display. Keep these instructions in a safe place for future reference.

• To reduce the risk of electric shock or component damage, switch o the power before connecting other components to your Display.

• Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not use this apparatus near water.

• Clean only with dry cloth.

• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce

heat.

• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.

• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

• Only use attachments/accessories specied by the manufacturer.

• Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When

a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

• Unplug this apparatus during lightning storms or when unused for long periods of time.

• Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any

way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

• Unplug the power cord before cleaning your Display.

• When moving your Display from an area of low temperature to an area of high temperature, condensation may form in the housing.

Wait before turning on your Display to avoid causing re, electric shock, or component damage.

• A distance of at least three feet should be maintained between your Display and any heat source, such as a radiator, heater, oven, amplier etc. Do not install your Display close to smoke. Operating your Display close to smoke or moisture may cause re or electric shock.

• Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of your Display and to protect it from overheating, be sure these openings are not blocked or covered. Do not place your Display in a bookcase or cabinet unless proper ventilation is provided.

• Never push any object into the slots and openings on your Display cabinet. Do not place any objects on the top of your Display. Doing so could short circuit parts causing a re or electric shock. Never spill liquids on your Display.

• Your Display should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.

• Do not apply pressure or throw objects at your Display. This may compromise the integrity of the Display. The manufacturer’s warranty does not cover user abuse or improper installations.

• The power cord must be replaced when using dierent voltage than the voltage specied. For more information, contact your dealer.

• When connected to a power outlet, power is always owing into your Display. To totally disconnect power, unplug the power cord.

• The lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un-isolated,

dangerous voltage within the inside of your Display that may be of sucient magnitude to constitute a risk of electric shock to persons.

• Do not overload power strips and extension cords. Overloading can result in re or electric shock.

• The wall socket should be installed near your Display and easily accessible.

• Only power of the marked voltage can be used for your Display. Any other voltage than the specied voltage may cause re or

electric shock.

• Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms.

• Unplug your Display during a lightning storm or when it will not be used for long period of time. This will protect your Display from

damage due to power surges.

• Do not attempt to repair or service your Display yourself. Opening or removing the back cover may expose you to high voltages, electric shock, and other hazards. If repair is required, contact your dealer and refer all servicing to qualied service personnel.

• WARNING: Keep your Display away from moisture. Do not expose your Display to rain or moisture. If water penetrates into your Display, unplug the power cord and contact your dealer. Continuous use in this case may result in re or electric shock.

• Do not use your Display if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair your Display yourself.

• Avoid using dropped or damaged appliances. If your Display is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of your Display may cause re or electric shock.

• Do not install your Display in an area with heavy dust or high humidity. Operating your Display in environments with heavy dust or high humidity may cause re or electric shock.

• Follow instructions for moving your Display. Ensure that the power cord and any other cables are unplugged before moving your Display.

• When unplugging your Display, hold the AC/DC power adapter, not the cord. Pulling on the power cord may damage the wires inside the cord and cause re or electric shock. When your Display will not be used for an extended period of time, unplug the power cord.

• To reduce risk of electric shock, do not touch the connector with wet hands.

• Insert batteries in accordance with instructions. Incorrect polarities may cause the batteries to leak which can damage the remote

control or injure the operator. Do not expose batteries to excessive heat such as sunshine, re or the like.

• If any of the following occurs, contact the dealer:

• The power cord fails or frays.

• Liquid sprays or any object drops into your Display.

• Your Display is exposed to rain or other moisture.

• Your Display is dropped or damaged in any way.

• The performance of your Display changes substantially.

• This apparatus shall not be exposed to dripping or splashing and no objects lled with liquids, such as vases, shall be placed on the

apparatus.

• The mains plug or appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

• CAUTION - These servicing instructions are for use by qualied service personnel only. To reduce the risk of electric shock, do not

perform any servicing other than that contained in the operating instructions unless you are qualied to do so.

• The lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated DANGEROUS VOLTAGE within the product’s enclosure that may be of sucient magnitude to constitute a risk of electrical shock to persons.

• Please use caution around the Display: pulling or pushing on the Display may cause the Display to tip or fall over resulting in personal injury and/or property damage.

• This apparatus is intended to be supported by a UL Listed Wall Mount Bracket or the equivalent.

Table of Contents

Getting Started ........................................................4

Eu-Series Display .............................................................................. 4

Basic Remote .................................................................................... 6

Downloading the VIZIO SmartCast

™

App ........................................ 7

First-Time Setup ......................................................8

™

VIZIO SmartCast

Navigating the SmartCast

User Prole Settings ......................................................................... 15

Picking something to Watch ............................................................ 17

Picking something to Listen to ........................................................ 19

Watchlists .......................................................................................... 21

App .............................................12

™

App ....................................................... 13

Collections ......................................................................................... 25

Watching Live TV ............................................................................... 28

Managing Categories ....................................................................... 32

Device Settings ........................................................33

Setting up additional SmartCast Devices ....................................... 33

Adjusting Picture Settings ................................................................ 36

Adjusting the Picture Mode Edit Settings ................................ 40

Adjusting the Color Calibration Settings .................................. 43

Adjusting Audio Settings .................................................................. 45

Adjusting Timer Settings .................................................................. 47

Activating the Sleep Timer ........................................................ 48

Setting the Auto Power O Feature ......................................... 48

Adjusting Network Settings ............................................................. 49

Using the Network Connection menu ..................................... 50

Renaming Devices on the Input Menu ........................................... 53

Renaming Devices on the Input Menu ..................................... 54

Enabling HDMI Color Subsampling .......................................... 54

Changing the Display System Settings ........................................... 55

Viewing System Information ..................................................... 56

Changing the On-Screen Menu Language ............................... 56

Setting the Time and Local Settings ......................................... 57

Adjusting the CEC Settings ........................................................ 57

Choosing a Power Mode Setting .............................................. 58

Turning the Power Indicator On or O .................................... 58

Adjusting the Reset & Admin Settings ..................................... 59

Manage mobile devices ................................................................... 61

Paired Mobile Devices ............................................................... 62

Troubleshooting ......................................................63

Specications ...........................................................64

Warranty Information .............................................72

Legal & Regulatory ..................................................74

iii

EU-SERIES DISPLAY

Overview - Front

1Getting Started

Remote Sensor & Power Indicator

When using the Basic Remote, aim it directly at this sensor.

The power indicator lights up when the Display turns on, then goes out after severral seconds. To keep the power indicator LED on as long as the Display is on, see Turning the Power Indicator On or O on page 58.

Overview - Back

Power Button

Volume Up/Down Buttons

Input Button

USB Ports

Component Ports

HDMI Port

Optical/SPDIF Audio Out Port

HDMI Ports

RCA Audio Out Ports

Ethernet Port

Note: The images shown here are for illustrative purposes only and may be subject to change. The actual number of ports and their locations may vary, depending on the model.

BASIC REMOTE

Overview

Use the Basic Remote to control the basic functions of the Eu-Series Display.

Power

Turn the Display on or o.

Link

Activate pairing mode.

(Between Display and Tablet Remote)

Volume Up/Down

Increase/decrease the

loudness of the audio.

Mute

Turn the audio on or o.

Input Change the currently displayed input.

Aspect Ratio

Cycle through the dierent

aspect ratio modes.

Channel Up/Down

(Not supported)

Picture Mode

Cycle through the dierent

picture modes.

Play/Pause

Play or pause content.

Inserting and replacing batteries

Two AAA batteries are included for you to use with the basic remote control.

To insert/replace the batteries:

1. Find the notch on the back of the remote. Insert a coin and pry open the back cover.

2. Remove the back cover and insert two AAA batteries (included). Be sure to

align the + and − symbols on the batteries and remote.

DOWNLOADING THE VIZIO SMARTCAST™ APP

Use your smartphone or tablet to tap, swipe, or use voice controls to access a library of casting content. To use your smartphone or tablet as your SmartCast Remote, download the VIZIO SmartCast on your compatible mobile device and follow the on-screen instructions to pair your device with your Eu-Series Display.

The VIZIO SmartCast app is available for download from the Google Play™ store and Apple App Store®.

™*

Android

• Android 4.4 or higher

• RAM: 1.5gb or more

• Storage: 8gb or more

• Networking: Wi-Fi

For a list of supported devices, see Google Play™ supported devices article.

iOS*

• iOS 8.0 or later

• Devices supported: iPhone®, iPad

†

Availability subject to change without notice.

To use the Bluetooth LE functionality you must have Android 5.1 or later.

†

https://support.google.com/googleplay/answer/1727131?hl=en

2First-Time Setup

Welcome to VIZIO SmartCast

Your new VIZIO Display is part of the all-new collection of Displays, displays, sound bars, and home audio speakers that can all be controlled by one ingenious app: the VIZIO SmartCast app.

With the app, you can browse movies, TV shows, music and more from multiple sources or apps in one view, without having to switch back and forth between those apps or sources. And then just tap to cast the content to your VIZIO Display

- from anywhere in your home. It works over WiFi, so you can control your VIZIO

™

Display from any room, and keep using your your device to continue browsing, play games, text or even watch another show, without disrupting what’s playing on your Display. With VIZIO SmartCast, what you love doesn’t change, but how you experience it will never be the same.

Now let’s get you into setup so you can start casting!

PAIRING YOUR MOBILE DEVICE WITH EU-SERIES DISPLAY

Need help installing the Display?

Refer to the printed Quick Start Guide (included) for detailed instructions on how to install your new Eu-Series Display. You can also nd a digital copy on support.vizio.com.

1. Turn on the Eu-Series Display by pressing the Power button on the back of the Display or by pressing the Power button on the Basic Remote Control. Launch the VIZIO SmartCast app on your device. Tap Get Started to begin the First-Time Setup.

Display Your Device

2. Select your language and tap Next to continue.

3. Hold your device close to the VIZIO logo on the bottom right corner of the

Display for a few seconds to pair it with the Eu-Series Display.

Note: The images shown here are for illustrative purposes only and may be subject to change. The actual on-screen image and text may vary, depending on the model.

4. The tablet begins to search for a wireless network to connect to. Select

your wireless network from the list and enter your password.

5. Use the tablet to name your Eu-Series Display.

6. Take a moment to read the VIZIO Terms of Service and Privacy Policy, as

well as Google’s Terms of Service and Privacy Policy. When you are done, tap NEXT to continue.

Note: The images shown here are for illustrative purposes only and may be subject to change. The actual on-screen image and text may vary, depending on the model.

7. Use the tablet to register your Eu-Series Display. If you do not wish to

8. Use the tablet to sign into your existing Google account. If you do not have

one, tap Or create a new account to create a new account. Follow the on-screen instructions to complete the First-Time Setup.

9. The First-Time setup is complete. The VIZIO SmartCast™ App is displayed.

Note: The images shown here are for illustrative purposes only and may be subject to change. The actual on-screen image and text may vary, depending on the model.

™

App

The VIZIO SmartCast™ app lets you swipe or use voice search to find your favorite content, across multiple apps and even live TV* together in one simply aggregated screen, making it easy to discover and enjoy movies, shows, music and more.

REGISTER FOR A MYVIZIO ACCOUNT

3VIZIO SmartCast

1. Launch the VIZIO SmartCast™ app.

2. Tap Create an Account to register for a MyVIZIO account. Follow the

on-screen instructions to complete the registration process. If you do not want to register for a MyVIZIO account, tap Skip to continue.

To take full advantage of the VIZIO SmartCast™ app, VIZIO recommends you register for a MyVIZIO account.

Note: The images shown here are for illustrative purposes only and may be subject to change. The actual on-screen image and text may vary, depending on the model.

NAVIGATING THE SMARTCAST™ APP

After you Creating/Logging into your MyVIZIO account, the home page of the SmartCast™ app is displayed.

Device Power

Change Aspect Ratio

Device Settings

Device Input

Change Picture Modes

Volume Controls

Device Menu

The Device Menu is available throughout the SmartCast app, allowing you to easily access the device controls.

Tap to minimize

Note: The images shown here are for illustrative purposes only and may be subject to change. The actual on-screen image and text may vary, depending on the model.

Swipe to reveal a list of content categorized into TV Shows, Movies, Music, Live TV, Kids, and Live Streams. You can also access these categorizes by tapping the button in the top left corner.

Note: The images shown here are for illustrative purposes only and may be subject to change. The actual on-screen image and text may vary, depending on the model.

USER PROFILE SETTINGS

Every user can register their very own user prole (MyVIZIO, Facebook, or Google),

keeping their personalized watchlists and collections.

To access the Prole page:

1. Tap the button to reveal the side menu.

2. Tap View Prole.

Note: The images shown here are for illustrative purposes only and may be subject to change. The actual on-screen image and text may vary, depending on the model.

To modify the account settings:

1. Tap the button to access the account settings page. You can change

the First Name, Last Name, E-mail Address, and password by tapping on each of them.

To edit prole settings:

1. From the Prole page, tap Edit Prole. You can edit the Prole Color,

Prole Name, and Location by taping on each of them.

Note: The images shown here are for illustrative purposes only and may be subject to change. The actual on-screen image and text may vary, depending on the model.

PICKING SOMETHING TO WATCH

After you get the hang of using the SmartCast app, it’s time for you pick and choose something to watch.

1. Tap on TV Shows, Movies, Live TV, Kids, or Live Steam from the Home page.

2. Depending on which category you pick, the content will be organized into

several collections (scroll up and down to reveal additional collection).

You can pick your content from the list or search for a title by tapping the search icon .

Note: The images shown here are for illustrative purposes only and may be subject to change. The actual on-screen image and text may vary, depending on the model.

3. Tap on the title you want to watch to see information regarding the cast,

meta scores, and etc.

4. A) Tap on the play button.

B) Select On Demand or On Now (Online feed*) and tap the play button. C) For On Demand: Select a source and tap the play button. D) Your title begins playing on your display. The Device Menu is

displayed − allowing you to control your display settings and content.

A B

Note: The images shown here are for illustrative purposes only and may be subject to change. The actual on-screen image and text may vary, depending on the model.

* Separate user account may be required to access content.

PICKING SOMETHING TO LISTEN TO

If you are in the mood to listen to some music, you can also browse directly from the SmartCast app.

1. Tap on Music from the Home page.

2. Music will be organized into several collections (scroll up and down to

reveal additional collection). You can pick your content from the list or

search for a title by tapping the search icon .

Note: The images shown here are for illustrative purposes only and may be subject to change. The actual on-screen image and text may vary, depending on the model.

3. Tap on the content you want to listen to.

4. A) Tap on the play button.

B) Select On Demand or On Now (Online feed*) and tap the play button. C) For On Demand: Select a source and tap the play button. Your content begins playing on your SmartCast device. The Device Menu is displayed − allowing you to control your device settings and content.

A B

Note: The images shown here are for illustrative purposes only and may be subject to change. The actual on-screen image and text may vary, depending on the model.

* Separate user account may be required to access content.

WATCHLISTS

While you are browsing for content, you can add titles to a watchlist (My Watchlist)

where you can easily access them whenever you want. You can also set alerts to notify you when new episodes are available to watch.

To add content to a watchlist:

1. From the Home page, tap on TV Shows, Movies, Kids, or Live Streams.

2. Tap on the title you want to add to your watchlist.

Note: The images shown here are for illustrative purposes only and may be subject to change. The actual on-screen image and text may vary, depending on the model.

3. Tap on the button and select Add to My Watchlist to add the title to

your watchlist.

4. The Add to Watchlist menu appears. Here you can set an alert for the title, alerting when it will be aired. Tap on Set Alert to turn the notication on.

Alert Types: New Airings Only, Live Airings Only, Unwatched Airings Only,

or All Airings.

Alert Time: 10 minutes, 15 minutes, 30 minutes, or 1 hour before the title airs.

Note: The images shown here are for illustrative purposes only and may be subject to change. The actual on-screen image and text may vary, depending on the model.

To view, edit, and watch titles from your watchlist:

1. Tap on the button and select My Watchlist.

2. The My Watchlist menu is displayed. Tap on a title, select and source, and

the content begins to play.

Note: The images shown here are for illustrative purposes only and may be subject to change. The actual on-screen image and text may vary, depending on the model.

+ 53 hidden pages