Vizio D24fM-K01, D32fM-K01, D40fM-K09, D43fM-K04 User Manual

D-Series
User Manual
Models:
D24fM-K01, D32fM-K01,
D40fM-K09 & D43fM-K04

Table of Contents

Front Panel ..................................................7
Power/Input Button ..........................................7
Rear Panel ..................................................8
Wall-mounting the TV ........................................10
Using the Remote ...........................................11
Using the Voice Remote ......................................12
Completing the First-Time Setup ................... 13
Using the On-Screen Menu ......................... 14
Changing the Input Source ....................................14
Navigating the On-Screen Menu ...............................14
Pairing Bluetooth headphones .................................14
Adjusting the Picture Settings .................................15
Adjusting the Color Temperature ...........................15
Changing the Picture Aspect Ratio .........................16
Adjusting Advanced Picture Settings .......................16
Adjusting Input Picture Settings ...........................19
Adjusting the Picture Mode Edit Settings ....................19
Adjusting the Audio Settings ..................................21
Sound Bar settings ...........................................21
Adjusting the Network Settings ................................22
Setting Up TV Channels .......................................23
Scanning for TV Channels .................................23
Skipping Channels .......................................23
Changing the System Settings .................................28
Changing the On-Screen Menu Language ...................28
Setting the Time ........................................28
Changing the TV Name ...................................29
Renaming Devices on the Input Menu .......................29
Adjusting the Power Mode ................................29
Using the USB Power Feature ..............................30
Turning the Power Indicator On or Off .......................30
Setting Timers ..........................................30
Setting a System PIN Code ................................31
Adjusting the CEC Settings ................................31
Managing Mobile Devices .................................31
Pairing the VIZIO Voice Remote ............................31
Using the Admin & Privacy Menu ...............................32
Performing a Reboot .....................................32
Viewing System Information ...............................32
Accessing the Support Code ..............................32
Checking for System Updates .............................32
Resetting the TV to Factory Default Settings .................32
Viewing Data ............................................33
Managing Advertising Settings ............................33
View VIZIO Privacy Policy .................................33
Store Demo .............................................33
User Manual ............................................33
Using the Info Window ........................................34
WatchFree+ ...................................... 36
What is WatchFree+? .....................................36
What you can do with WatchFree+ ..........................36
How to Launch WatchFree+ ...............................36
Playing USB Media ................................ 37
Preparing Your USB Drive to Play USB Media ................37
Displaying USB Media ....................................37
Removing the USB Drive from the TV .......................37
Product Registration and Support .................. 41
Help Topics ...................................... 42
Specications .................................... 44
Regulatory Information ............................ 45
Limited Warranty ................................. 46
Legal Information ................................. 48
Changing the Analog Audio Language ......................24
Using Parental Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Accessibility Settings .........................................26
Setting Up Closed Captioning .............................26
Changing the Appearance of Digital Closed Captions .........27
VIZIO Smart TV Platform .......................... 35
What is the VIZIO Smart TV Platform? ......................35
Launching the VIZIO Smart TV Platform ....................35
What you can do with the VIZIO Smart TV Platform ...........35
Controlling your TV with the VIZIO Mobile App ...............35
2
Safety & Certication

THANK YOU FOR CHOOSING VIZIO

And congratulations on your new VIZIO TV!
To get the most out of your new VIZIO product, read these instructions before using your product and retain them for future reference. Be sure to inspect the package contents to ensure there are no missing or damaged parts.

PRODUCT REGISTRATION

To purchase or inquire about accessories and installation services for your VIZIO product, visit our website at vizio.com.
We recommend that you register your VIZIO product at vizio.com/product-registration.

WHEN READING THIS MANUAL

TIP: When you see this symbol, please read the accompanying helpful tip.
WARNING: When you see this symbol, please read the accompanying important warning or notice. It is intended to alert you to the presence of important operating instructions.
Color Text — This is the TV menu feature you should be selecting.
Grey Text This is an action for you to complete, such as entering in a name.
> The arrow sign shows the flow of the steps you should take.
1. Lists additional steps you can take for each setting.
Bullets give more detailed information about each feature.

IMPORTANT SAFETY INSTRUCTIONS

Your TV is designed and manufactured to operate within defined design limits. Misuse may result in electric shock or fire. To prevent your TV from being damaged, the following instructions should be observed for the installation, use, and maintenance of your TV. Read the following safety instructions before operating your TV. Keep these instructions in a safe place for future reference.
To reduce the risk of electric shock or component damage, switch off the power before connecting other components to your TV.
Heed all warnings.
Follow all instructions.
Do not use this TV near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at the ends where the plug is located, near convenience receptacles, or where they exit from the TV.
Only use attachments/accessories specified by the manufacturer.
Use only with the stand, tripod, or bracket specified by the manufacturer, or sold with the TV.
When a cart is used, use caution when moving the cart/TV combination to avoid injury from tip-over.
Unplug the power cord before cleaning your TV.
Refer all servicing to qualified service personnel. Servicing is required when the TV has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the TV, the TV has been exposed to rain or moisture, does not operate normally, or has been dropped.
CAUTION: Always use a power outlet that is properly grounded.
Unplug this TV during lightning storms or when unused for long periods of time.
When moving your TV from an area of low temperature to an area of high temperature, condensation may form in the housing. Wait before turning on your TV to avoid causing fire, electric shock, or component damage.
A distance of at least three feet should be maintained between your TV and any heat source, such as a radiator, heater, oven, amplifier, etc. Do not install your TV close to smoke. Operating your TV close to smoke or moisture may cause fire or electric shock.
Slots and openings in the back and bottom of the TV are provided for ventilation. To ensure reliable operation of your TV and to protect it from overheating, be sure these openings are not blocked or covered. Do not place your TV in a bookcase or cabinet unless proper ventilation is provided.
Never push any object into the slots and openings on your TV. Do not place any objects on the top of your TV. Doing so could short circuit parts causing a fire or electric shock. Never spill liquids on your TV.
Your TV should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.
Do not apply pressure or throw objects at your TV. This may compromise the integrity of the TV. The manufacturer’s warranty does not cover user abuse or improper installations.
The power cord must be replaced when using different voltage than the voltage specified. For more information, contact your dealer.
When connected to a power outlet, power is always flowing into your TV. To totally disconnect power, unplug the power cord.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un-isolated, dangerous voltage within the inside of your TV that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
The wall socket should be installed near your TV and easily accessible.
Only power of the marked voltage can be used for your TV. Any other voltage than the specified voltage may cause fire or electric shock.
Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms.
3
Unplug your TV during a lightning storm or when it will not be used for long period of time. This will protect your TV from damage due to power surges.
Do not attempt to repair or service your TV yourself. Opening or removing the back cover may expose you to high voltages, electric shock, and other hazards. If repair is required, contact your dealer and refer all servicing to qualified service personnel.
WARNING: Keep your TV away from moisture. Do not expose your TV to rain or moisture. If water penetrates into your TV, unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock.
Do not use your TV if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair your TV yourself.
Avoid using dropped or damaged appliances. If your TV is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of your TV may cause fire or electric shock.
Do not install your TV in an area with heavy dust or high humidity. Operating your TV in environments with heavy dust or high humidity may cause fire or electric shock.
Follow instructions for moving your TV. Ensure that the power cord and any other cables are unplugged before moving your TV.
To prevent injury, this apparatus must be securely attached to the furniture/wall in accordance with the installation instructions.
Insert batteries in accordance with instructions. Incorrect polarities may cause the batteries to leak which can damage the remote control or injure the operator. Do not expose batteries to excessive heat such as sunlight, fire, etc.
When unplugging your TV, grab the head of the power plug, not the cord. Pulling on the power cord may damage the wires inside the cord and cause fire or electric shock. When your TV will not be used for an extended period of time, unplug the power cord.
To reduce risk of electric shock, do not touch the connector with wet hands.
Do not expose TV to liquids, including dripping or splashing.
Do not place objects filled with liquid, such as vases, on the TV.
If the main wall plug or the appliance coupler is disconnected, the disconnected device will remain readily operable upon reconnection to an appropriate power source.
If any of the following occurs, contact the dealer:
The power cord fails or frays.
Liquid sprays or any object drops into your TV.
Your TV is exposed to rain or other moisture.
Your TV is dropped or damaged in any way.
The performance of your TV changes substantially.
CAUTION: These servicing instructions are for use by qualified service
personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated DANGEROUS VOLTAGE within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons.
WARNING: Exposure to loud sounds can damage your hearing causing hearing loss and tinnitus (ringing or buzzing in the ears). With continued exposure to loud noises, ears may become accustomed to the sound level, which may result in permanent damage to hearing without any noticeable discomfort.
Install the TV where it cannot be pulled, pushed or knocked over.
Do not allow children to hang onto the product.
Store the accessories (remote, batteries, etc.) in a location safely out of the reach of children.
The American Academy of Pediatrics discourages use of screen media for children younger than eighteen months of age.
WARNING — Stability Hazard: A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:
ALWAYS use cabinets or stands or mounting methods recommended by the manufacturer of the television set.
ALWAYS use furniture that can safely support the television set.
ALWAYS ensure the television set is not overhanging the edge of the supporting furniture.
ALWAYS educate children about the dangers of climbing on furniture to reach the television set or its controls.
ALWAYS route cords and cables connected to your television so they cannot be tripped over, pulled or grabbed.
NEVER place a television set in an unstable location.
NEVER place the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.
NEVER place the television set on cloth or other materials that may be located between the television set and supporting furniture.
NEVER place items that might tempt children to climb, such as toys and remote controls, on the top of the television or furniture on which the television is placed.
If the existing television set is going to be retained and relocated, the same considerations as above should be applied.
Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery can result in an explosion.
Leaving a battery in an extremely high temperature can result in an explosion or the leakage of flammable liquid or gas.
A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
CAUTION: Risk of explosion if the battery is replaced by an incorrect type.
Use consumer grade, non-rechargeable 'AAA' carbon-zinc or alkaline batteries.
WARNING: To prevent injury, this apparatus must be securely attached to the furniture/wall in accordance with the installation instructions.
4

TELEVISION ANTENNA CONNECTION PROTECTION

The TV shall be installed in accordance with the applicable provisions of Article 810 and Article 820.
If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges.
Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of the grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements of the grounding electrode.

Lightning Protection

For added protection of the TV during a lightning storm or when it is left unattended or unused for long periods of time, unplug the TV from the wall outlet and disconnect the antenna or cable system.

Power Lines

Do not locate the antenna near overhead light or power circuits, or where it could fall into such power lines or circuits. Remember, the screen of the coaxial cable is intended to be connected to earth in the building installation.

Installation of CATV

The installation instructions states the cable distribution system should be grounded (earthed) in accordance with ANSI/NFPA 70. the National Electrical Code (NEC), in particular Section 820.93, Grounding of Outer Conductive Shield of a Coaxial Cable.

Installation of Antenna

The installation instructions states the cable distribution system used for connection to antennas and dishes should be grounded (earthed) in accordance with ANSI/ NFPA 70. the National Electrical Code (NEC), in particular Section 810.21, Bonding Conductors and Grounding Electrode Conductors — Receiving Stations.
Ground Clamp
Electric Service Equipment
Antenna Lead In Wire
Antenna Discharge Unit
(NEC Section 810-20)
Grounding Conductors
(NEC Section 810-21)
Ground Clamps
Power Service Grounding Electrode System
(NEC ART 250, part H)
5
®
DTS-HD
High Denition Audio
®
DTS® Virtual:X
Virtualized 3D Sound
Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright © 1992-2019 Dolby Laboratories. All rights reserved.
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS, Inc. DTS, DTS-HD, Virtual:X, and the DTS-HD logo are registered trademarks or trademarks of DTS, Inc. in the United States and other countries. © 2021 DTS, Inc. ALL RIGHTS RESERVED.
6

Getting to Know Your TV

FRONT PANEL

Remote Sensor and Power Indicator

When using the remote, aim it directly at the sensor. The power indicator flashes on when the TV turns on, then goes out after several seconds. To keep the power indicator on, see Turning the Power Indicator On or O on page 30.
POWER/INPUT BUTTON
(located under the sensor)

When TV is OFF: Press to turn on the TV.

When TV is ON: Press to change to the next input source. Press, hold (3 seconds), and release to turn TV off. Press and hold (12 seconds) to reset TV to default settings.

7
REAR PANEL
HDMI
Connect an HDMI device
Optical Audio Out
Connect an optical/SPDIF audio
device, such as a home audio
receiver
Note: The image shown here is for illustrative purposes only and may be subject to change. The actual number of ports and their locations may vary, depending on the model.
Ethernet
Connect an Ethernet cable
to a modem/router
(only available on
Connect a USB thumb drive to play music or video, or display
USB
photos
D43fM-K04 models)
Stereo Audio Out
Connect a 3.5 mm stereo audio
device, such as headphones
Coaxial
Connect a coaxial cable from
cable, satellite, or antenna
8

Connecting a device — AUDIO & VIDEO CABLE TYPES

Your TV can be used to display output from most devices.
1. Verify that your device has a video port that matches an available port on the TV.
2. Connect the appropriate cable (not included) to the TV and the device.
HDMI CABLE
HDMI
3. Turn the TV and your device on.
4. Set the TV’s input to match the connection you used (HDMI-1, HDMI-2, etc.).

Connecting a device — AUDIO CABLE TYPES

Your TV can output sound to an audio device, such as a receiver or sound bar.
1. Verify that your device has an audio port that matches an available port on the TV.
2. Connect the appropriate cable (not included) to the TV and the device.
COAXIAL CABLE
Coaxial
HDMI CABLE
HDMI
3. Turn the TV and your device on.
Note: The actual ports and their locations may vary, depending on the TV model.
OPTICAL/SPDIF CABLE
Optical
STEREO AUDIO OUT CABLE
Stereo Audio Out
9
WALLMOUNTING THE TV
First, you will need a wall mount. Consult the provided table below to find the appropriate mount for your TV.
Be sure the mount you choose is capable of supporting the weight of the TV.

To install your TV on a wall:

1. Disconnect any cables connected to your TV.
2. Place the TV face-down on a clean, flat, stable surface. Be sure the surface is clear of debris that can scratch or damage the TV.
3. If attached, remove the stands by loosening and removing the screws.
4. Attach your TV and wall mount to the wall by carefully following the instructions that came with your mount. Use only with a UL-listed wall mount bracket rated for the weight/load of your TV.
TIP: Installing a TV on a wall requires lifting. To prevent injury or damage to the TV, ask someone to help you.
WARNING: Do not use the screws that are included inside the wall mount holes to mount TV.
Note: The image shown here is for illustrative purposes only and may be subject to change. The actual screws and their locations may vary, depending on the model.
D24fM-K01 D32fM-K01 D40fM-K09 D43fM-K04
Screw Size
# of Screws (not included) 4 4 4 4
Hole Depth 8 mm 8 mm 10 mm 10 mm
Hole Pattern 100 mm x 100 mm 100 x 100 mm 200 mm x 100 mm 200 mm x 100 mm
Weight w/o Stand 5.86 lb (2.66 kg) 8.40 lb (3.81 kg) 12.1 lb (5.48 kg) 14.88 lb (6.75 kg)
M4 x 8 mm M6 x 8 mm
M6 M4
10
USING THE REMOTE
Change the currently displayed input
Quickly launch the pictured app
Input
App Launcher
Power
Turn television on or off

Replacing the Batteries

1. Push and slide the cover down. Then lift the cover to access the battery compartment.
2. Insert two batteries into the remote control. Make sure that the (+) and (-) symbols on the batteries match the (+) and (-) symbols inside the battery compartment.
3. Replace the battery cover and slide to close.
Lift
Voice
Push and hold to make a voice command
WatchFree+
Access free streaming channels
Navigation Buttons — Left / Right
Navigate the on-screen menus
Navigation Buttons — Up / Down
Navigate the on-screen menus
Back
Go to the previous on-screen menu
Volume Up/Down
Increase or decrease the loudness of the audio
Menu
Display the settings menu
OK/Play/Pause Select the highlighted menu option and play or pause content
Home Button
Launch or retu Home screen
Closed Caption
Enable or disable Closed Captions
Long press to open the Accessibility menu featuring captions, talk back, speech rate, and zoom mode
Mute
Turn the audio on or off
rn to the VIZIO Smart TV
Push
+
AAA
AAA
+
In many places, batteries cannot be thrown away or discarded with household waste. Please ensure you properly dispose of your batteries consistent with the laws and/or regulations where you live. For more information please visit: www.vizio.com/environment
WARNING: Keep the remote control batteries away from children. It may cause choking and/or lead to a re or chemical burn if mishandled. Do not dispose of batteries in re. Replace only with batteries of the correct type. Risk of re or explosion if the battery is replaced by an incorrect type.
TIP: When needed, VIZIO recommends replacing the batteries that came with this remote with two, new Duracell ‘AAA’ alkaline batteries.
11
USING THE VOICE REMOTE
You can easily control your TV with the included Voice Remote.

To pair your remote to the TV:

During the first-time setup, your remote should automatically pair to your TV via Bluetooth.

To manually pair:

Press the MIC button to launch pairing mode.

How to use the voice control:

1. Push and hold the MIC button, then speak a command.

Here are some phrases you can say:

"Find free comedy movies."
"Switch input to HDMI-2."

Using the VIZIO Mobile App for voice control:

You can also use the free VIZIO Mobile App as a voice control remote. See
Controlling your TV with the VIZIO Mobile App on page 35
for more
information.

Connect to other popular voice assistant devices:

VIZIO TVs also work with Google Assistant, Siri, and Alexa-enabled devices for hands-free voice control.
TIP: The voice remote must be within close enough range of the TV to pair properly.
vizio.com/qr/XRT260
"Launch WatchFree+."
"Turn on captions."
"Lower volume to 10."
Scan to learn more.
Scan with your phone camera or QR reader.
TIP: If you want to use a voice assistant to turn your TV on, make sure Quick Start Mode is enabled. See
Adjusting the Power Mode
on page 29.
This device is equipped with the VIZIO Voice feature. By activating the VIZIO Voice feature (either through the mobile application or Bluetooth remote), you can control your Smart TV, and use many of its features, with voice commands. In order to provide you the VIZIO Voice feature, some voice commands may be transmitted to a third-party service provider that will translate your voice command into text and provide VIZIO Voice features. We may also capture and collect voice commands and associated text(s) in order to provide the VIZIO Voice feature and evaluate and improve the features. VIZIO will only capture voice commands when you press the microphone button on your remote or mobile app and speak into the microphone on the remote control or mobile phone. You may disable the VIZIO Voice feature for your remote at any time by unpairing your Bluetooth remote.
12

Completing the First-Time Setup

Before you begin the rst-time setup:
Your TV should be installed and the power cord should be connected to an electrical outlet.
If you have a wireless network, have the network password ready.
If you are connecting to your network with an Ethernet cable, connect one end of the cable to the Ethernet port on the TV.
The first time you turn on the TV, the on-screen instructions will guide you through each of the steps necessary to get your TV ready for use:
Choose a Wi-Fi Network.
Home Network
Public Wi-Fi John’s Network Ana’s Network Encrypted
Rescan Networks Hidden Netwok Help Skip
Family Room
1. Choose your language. enable TTS (text-to-speech) functionality. Pressing the Down Navigation button will enable Store Demo mode.
Which room is your VIZIO TV Located?
Living Room
Master
Add Custom Location+
Choose a language for your TV.
English
Bedroom Game Room
Español FrançaisFrançais
Pressing the CC button will
Your use of this device and software functionality are covered by VIZIO and Google ‘s respective Terms of Service and Privacy Policies.
By pressing “Accept All”, you agree to be bound by the (i) VIZIO Terms of Service and Privacy Policy and (ii) the Google Terms of Service and
VIZIO Terms &
Conditions
Terms & Conditions.
Privacy Policy. NOTE: Accepting the terms and policiesis a condition of using the Cast functionality of this device.
VIZIO Privacy
Policy
Skip For Now Accept All
Google Privacy
Policy
Google Terms &
To begin pairing, press and hold the
Microphone and Mute buttons on your voice
remote for three secons, until the light on
the remote begins to ash.
2. Pair your voice remote.
Conditons
Pair Your Remote
Your Voice Remote has been paired
WHAT DATA DOES ACR TECHNOLOGY COLLECT?
When enabled, ACR technology will collect information about the audio and video programing content playing on this internet-connected display unit including broadcast television, advertisements and other commercially available content. We associate this Viewing Data with the IP address for the unit, and a unique device number we assign. You may change your Viewing Data settings at any time within the Settings Menu of your TV. Declining Viewing Data collection will not change the functionality of your device.
WHO DO WE SHARE VIEWING DATA WITH?
When enabled, we share Viewing Data with authorized data partners. We license Viewing Data to analytics companies, media companies, advertisers, ad agencies, and other ad tech companies who measure ad effectiveness or aid personalization of ads. Our authorized cloud service providers may also store this data on and solely on our behalf, and for no other purposes.
+
This unit is equipped with Automated Content Recognition (”ARC”) Technology also known as Viewing Data.
Viewing Data
WHAT DO WE DO WITH VIEWING DATA?
VIZIO or its authorized data partners may combine Viewing Data with household demographic data, or other data about your digital actions, like smartphone location, web histories or offline purchases, in order to determine the effectiveness of a particular ad, or choose which ads are likely to be useful or timely, including during broadcast, cable, satellite, or internet based television programming. VIZIO and its authorized data partners also use the information to generate summary analysis and reports of how users engage with content on their TVs and other devices.
WHAT ELSE DOES VIEWING DATA SHARING MEAN FOR YOU?
Viewing Data is also used to help content publishers, broadcasters or content distribution services create or recommend more relevant entertainment based on summary insights. For example, if devices sharing your IP address suggest an interest in music, fitness, or sports related topics, advertisers might deliver tailored
Viewing Data Policy Decline Accept
3. Choose your Wi-Fi network and enter the password.
Activity Data
You have purchased a “SmartTV,” which is an internet-connected display unit that offers a range of online features, including access to subscription streaming
services and free (ad-supported) Apps such as WatchFree Plus. To deliver the service, the device automatically sends back clicks and impressions as you navigate
Impressions and click data are used to suggest relevant content, and to inform relevant ad placements in some of the Apps. This activity data is associated with a
unique ID stored separately within third-party analytics and is not paired with your name and contact information. We may share impressions and click data in
If you change your mind about accepting this notice, you can reset factory settings. To learn more, please read the SmartCast Privacy Policy at vizio.com/privacy.
and interact with the SmartCast Platform and Apps.
summary reports with select partners with whom we have a relationship.
Decline Accept
7. View and accept the Activity Data Policy.
4. Name your TV.
Register your VIZIO TV.
Get VIP access to exclusive deals & offers, recieve first-to-know updates on new
product releases and get the latest VIZIO technology and product news.
Use the VIZIO Mobile App to Add
Your New TV to Your Account
Enter Email
Register TV for More Benefits
Control Your TV with Your SmartPhone
Coming Soon - Purchase on Your TV
Set up later Web setup
8. Add your TV to your account.
Activity Data
1/3
Decline Accept
Setup code B1H9PX
5. Accept the Terms & Conditions.
Register your VIZIO TV.
Get VIP access to exclusive deals & offers, recieve first-to-know updates on new
product releases and get the latest VIZIO technology and product news.
Enter Email
9. Register your VIZIO TV.
Activity Data
6. View and accept VIZIO Viewing Data Policy.
1/3
Now you're all set.
Enjoy!
13
1/3

Using the On-Screen Menu

CHANGING THE INPUT SOURCE
External devices, such as DVD players, Blu-ray players, and video game consoles, can be connected to your TV. To use one of these devices with your TV, you must first change the input source using the input menu.
To change the input source:
1. Press the INPUT button on the remote.
The input menu is displayed on the left of the screen.
2. Use the Navigation buttons or the INPUT
button on the remote to highlight the input you wish to view. The corresponding inputs are named on the back of your TV.
3. Press OK. The selected input is displayed.

Input Name

The input with the check mark to the right of it is the current input selected. Inputs may vary by TV.
Input
SMARTCAST
AirPlay
WatchFree+
HDMI-1
HDMI-2
TV
NAVIGATING THE ONSCREEN MENU
To open the on-screen menu:
1. Press the MENU button on the remote.
2. Use the Navigation buttons to highlight a menu option, and press the OK button to select that option.
From this menu, you can:
Set up Bluetooth Headphones
Adjust picture settings
Adjust audio settings
Adjust network settings
Adjust TV channel settings
Adjust accessibility settings
Adjust TV system settings
Access admin and privacy settings
View the user manual
TV Settings
Bluetooth Headphones
Picture
Audio
Network
TV Channels
Accessibility
System
Admin & Privacy
User Manual
PAIRING BLUETOOTH HEADPHONES
Your TV can be paired with Bluetooth headphones for listening to audio.
To pair Bluetooth headphones:
Menu > Bluetooth Headphones
1. Set your Bluetooth headphones to pairing mode (see your device manual for instructions). The headphones will appear in the list of Other Devices.
2. Select the Bluetooth headphones and press the OK button.
3. Once paired, the device will be listed under Paired Devices and is ready for listening.
Bluetooth Headphones
TV Speakers
Paired Devices
BT Earbuds
Other Devices
TIP: You can change the input names that appear on the Input menu to make your devices easy to recognize. See
Devices on the Input Menu on page 29
.
Renaming
TIP: While navigating the on-screen menu, you can press the BACK button at any time to return to the previous menu screen.
14
ADJUSTING THE PICTURE SETTINGS
2. Select Gaming Mode for access to gaming-related information and settings:

Adjusting the Color Temperature

Your TV can be adjusted to suit your preferences and viewing conditions.
To adjust the picture mode settings:
Menu > Picture > Picture Mode
Picture
Picture Mode
Gaming Mode
Backlight
Brightness
Contrast
Color
Tint
Sharpness
Color Temperature
Aspect Ratio
Advanced Picture
1. Use the Navigation buttons on the remote to highlight Picture Mode, then use the Left/Right Navigation buttons to change the picture mode:
Calibrated
15
25
50
50
50
50
Normal
Normal
Game Low Latency — When enabled, reduces video delay lag.
Variable Refresh Rate (VRR) — When enabled, adjusts the refresh rate of the
screen based on the content.
HDMI Mode — Adjusts the picture to correctly support display output of older
devices.
3. To manually change each of the picture settings, use the Up/Down Navigation buttons on the remote to highlight a picture setting, then use the Left/Right Navigation buttons to adjust the setting:
Backlight (SDR content) — Adjusts the LED brightness to affect the overall brilliance of the picture.
Brightness — Adjusts the black level of the picture. When this setting is too low, the picture may be too dark to distinguish details. When this setting is too high, the picture may appear faded or washed out.
Contrast — Adjusts the white level of the picture. When this setting is too low, the picture may appear dark. When this setting is too high, the picture may appear faded or washed out. If the setting is too high or too low, detail may be difficult to distinguish in dark or bright areas of the picture.
Color — Adjusts the intensity of the picture colors.
Adjusting the color temperature changes the white balance of the picture.
To adjust the color temperature:
Menu > Picture > Color Temperature
Use the Navigation buttons on the remote to highlight a color temperature preset, then press OK.
Warm — Produces an orange-hued picture.
Cool — Produces a blue-hued picture.
Normal — Optimized for television viewing.
Color Temperature
Warm
Cool
Normal
Vivid — Sets the picture settings to values that produce a brighter, more
vivid picture.
Bright — Great for viewing everyday TV, such as news and TV shows, that
requires a brighter image with motion enhancements.
Calibrated — Accurate colors intended for cinema content viewing in a
bright room.
Calibrated Dark — Accurate colors intended for cinema content viewing in a
dark room or at nighttime.
Game — Reduces throughput delays and optimizes the picture settings for
displaying game console output. Also the preferred picture mode for computer mode.
Sports — Sets the picture settings to values ideal for watching sporting events
with motion control setting.
Tint — Adjusts the hue of the picture. This setting is useful in adjusting the flesh tones in the picture. If flesh appears too orange, reduce the level of color before adjusting tint.
Sharpness — Adjusts the edge sharpness of picture elements. It can be used to sharpen non-HD (high definition) content; however, it will not produce detail that does not otherwise exist.
TIP: If you save changes to the setting for a picture mode, an asterisk will appear after its name. See
Mode on page 19
.
Saving a Custom Picture
15

Changing the Picture Aspect Ratio

Adjusting Advanced Picture Settings

To change the screen aspect ratio:
Menu > Picture > Aspect Ratio
Use the Navigation buttons to highlight the aspect ratio you wish to apply.
Your TV can display images in different modes:
Normal (default) — No change to aspect
ratio.
*
Stretch
When the 16:9 signal is a 4:3
image with black bars on the left and right, the image will be stretched to fill the screen.
Panoramic* — Stretches a 4:3 image to fill a
16:9 screen with an algorithm so the center doesn’t look stretched.
Wide — Stretches a 4:3 aspect ratio to fill a
16:9 screen. If the signal is a 16:9 image,black bars are added to the top and bottom.
Zoom — Expands image both horizontally
and vertically by 14%.
Some programs have black bars on the top and bottom or sides of the screen so the picture keeps its original shape. Examples include widescreen movies and older TV programs.
TIP: The aspect ratio cannot be changed for Ultra HD content or HDR content.
Aspect Ratio
Normal
Panoramic
Wide
Zoom
To adjust advanced picture settings:
Menu > Picture > Advanced Picture
Use the Navigation buttons to highlight the setting you wish to adjust, then press the Left/Right Navigation buttons to change the setting:
Black Detail — Adjusts the average brightness of the picture to compensate for large areas of brightness.
Edge Enhancement — Increases the smoothness of edges.
Local Contrast — Adjust the contrast of the picture locally.
Backlight Control — Dynamically improves the contrast ratio of the picture by adjusting the backlight.
Reduce Noise:
Signal Noise: Reduces background picture noise when viewing analog
sources. This function helps to correct "speckle" noise with a slight reduction in sharpness.
Block Noise: Reduces the side eects of digital compression such as "blocking" and noise on sharp edges. The High setting will cause a slight reduction in sharpness.
Film Mode — Optimizes the picture for watching lms. Select On or O.
Advanced Picture
Black Detail
Edge Enhancement
Local Contrast
Backlight Control
Reduce Noise
Film Mode
Gamma
Color Calibration
2.1 - Normal
Off
Low
Low
On
On
*
Available aspect ratio settings may vary by input source. Panoramic mode is only available for standard
definition TV (480i/480p) and Stretch mode is only available for high definition TV (720p/1080i/1080p).
Gamma — Set the shape of the Gamma curve. Use lower Gamma values for
bright room conditions, and higher values when it’s dark.
Color Calibration — Calibrate colors using HSB, gain, oset, and 20 point
white balance and test or reset colors to defaults.
16

Adjusting the Color Tuner Settings

To adjust the color management system settings:
To show or hide the SMPTE Test Pattern:
The Color Tuner settings allow you to adjust the color management system, 20 point white balance, turn color channels off for testing, and display SMPTE, flat, ramp, and uniformity analyzer test patterns.
To access the color tuner table:
Menu > Picture > Advanced Picture > Color Calibration > Color Tuner
WARNING: The Color Tuner, White Balance, and test patterns
allow technicians to manually calibrate the TV. Calibration requires specialized training, an input with precisely set colors, and a specialized light meter.
To turn color channels o and on:
1. Use the Navigation buttons on the remote to highlight Red, Green, or Blue.
2. Press the OK button to turn the color channel off or on. An X appears over a
color channel that has been turned off.
3. Only two color channels can be turned off at the same time.
1. Use the Navigation buttons on the remote to highlight the Hue, Saturation, Brightness, Offset, or Gain of the color you wish to adjust, then press the OK button.
2. Use the Left/Right Navigation buttons to adjust the value. When you are finished, press the OK button to save the setting.
Color Tuner
Red Green Blue Cyan Magenta Yellow
Hue 0 0 0 0 25 -14
Saturation -1 5 -4 0 -2 0
Brightness -24 0 -22 0 0 0
To adjust the White Balance Tuner settings:
Menu > Picture > Advanced Picture > Color Calibration > White Balance Tuner
1. Use the Navigation buttons on the remote to highlight the Gain and Color values you wish to adjust, then press the OK button
Menu > Picture > Advanced Picture > Color Calibration > Calibration Test > SMPTE Test Pattern
SMPTE Test Pattern
O
1. To show the SMPTE Test Pattern, use the Navigation buttons on the remote to highlight O, then use the Left/Right Navigation buttons to select On.
—or—
2. To hide the SMPTE Test Pattern, use the Left/Right Navigation buttons to select O.
TIP: Any changes made affect the color temperature setting. Select the preferred color temperature setting first. See
Adjusting
the Color Temperature on page 15.
2. Use the Left/Right Navigation buttons to adjust the value. When you are finished, press the OK button to save the setting.
White Balance Tuner
Red Green Blue
IRE% 5 0 0 0
Oset 0 0 0
Gain 0 0 0
To reset the 20 point white balance, oset, and gain to the defaults:
Menu > Picture > Advanced Picture > Color Calibration > Reset Color Temperature
17
To show or hide the Flat Test Pattern:
To show or hide the Ramp Test Pattern:
To show or hide the Uniformity Analyzer Test Pattern:
Menu > Picture > Advanced Picture > Color Calibration > Calibration Test > Flat Test Pattern
Flat Test Pattern
Off
1. To show the Flat Test Pattern, use the Navigation buttons on the remote to highlight O, then use the Left/Right Navigation buttons to select the percentage brightness for the Flat Test Pattern. Selecting a percentage immediately shows the flat pattern at that brightness.
—or—
2. To hide the Flat Test Pattern, use the Left/Right Navigation buttons to select O.
Menu > Picture > Advanced Picture > Color Calibration > Calibration Test > Ramp Test Pattern
Ramp Test Pattern
Off
1. To show the Ramp Test Pattern, use the Navigation buttons on the remote to highlight O, then use the Left/Right Navigation buttons to select the color for the Ramp Test Pattern. Selecting a color immediately shows that color ramp.
—or—
2. To hide the Ramp Test Pattern, use the Left/Right Navigation buttons to select O.
Menu > Picture > Advanced Picture > Color Calibration > Calibration Test > Uniformity Analyzer Test Pattern
Uniformity Analyzer Test Pattern
Off
1. To show the Uniformity Analyzer Test Pattern, use the Navigation buttons on the remote to highlight O, then use the Left/Right Navigation buttons to select On.
—or—
2. To hide the Uniformity Analyzer Test Pattern, use the Left/Right Navigation buttons to select O.
18

Adjusting Input Picture Settings

Enable HDMI Mode, Full Color 4:4:4, and adjust picture size and position.
To adjust the Input settings:
Menu > Picture > Input Picture Settings
Use the Navigation buttons to highlight the setting you wish to adjust.
Picture Size and Position
picture to the screen.
HDMI Mode — If necessary, to support correct picture of older devices, override
the automatic setting to use legacy HDMI mode.
Color Space Range — Select Color Space for the source. Video sources uses
YCbCr, but PC uses RGB.
*
configure the display size and position of the

Adjusting the Picture Mode Edit Settings

Manage custom picture modes and reset preset picture modes.
To adjust the Picture Mode Edit settings:
Menu > Picture > Picture Mode Edit
Picture Mode Edit
Save Picture Mode
Copy Picture Mode
Lock Picture Mode Off
Reset Picture Mode - Bright*

Saving a Custom Picture Mode

Custom picture modes allow you to save a group of custom settings for various viewing conditions and video sources.
To save a custom picture mode:
Menu > Picture > Picture Mode Edit > Save Picture Mode > Enter
a Name >Save
Save Picture Mode
*
Only available if there is an input source. Not available for WatchFree+.
Menu items will be grayed out if not available.
Use the Navigation buttons to highlight the setting you wish to adjust, then press OK to change the setting:
Save Picture Mode — Save a custom picture mode.
Copy Picture Mode — Copy the settings for a custom picture mode.
Lock Picture Mode — Prevent changes to custom picture modes.
Reset Picture Mode — Reset the picture mode settings to factory default values.
Only available on customized preset modes.
Delete Picture Mode — Delete a custom picture mode. Inputs assigned to the
custom picture mode will use the Calibrated picture mode.
Custom picture modes allow you to save a group of custom settings for various viewing conditions and video sources.
Changes made while on any preset picture mode will add an asterisk on the top right corner of the preset mode.
The custom picture mode is not automatically saved.
19

Copying a Picture Mode

Locking a Picture Mode

Deleting a Picture Mode

Custom picture mode settings can be copied and applied to other inputs.
1. Complete the desired changes for the selected picture mode, then select
Save Picture Mode to save the picture mode for all inputs.
2. Select the input you want to copy your saved picture mode edits to.
3. Change the picture mode to your custom saved mode: Menu > Picture >
Picture Mode > select saved custom picture mode
4. Copy your custom picture mode: Menu > Picture > Picture Mode Edit > Copy
Picture Mode
5. Select the picture mode you would like to copy over.
6. A notification displays after the copy to your selected picture mode is completed. This picture mode will now have your custom settings saved over it for the selected input.
7. Repeat as needed to customize additional inputs.
Custom picture modes can be locked and unlocked with a unique PIN to prevent accidental changes to their settings. If not previously set, you can set up your system PIN code here as well.
To lock all custom picture modes:
Menu > Picture > Picture Mode Edit > Lock Picture Mode > On >
Enter Your PIN > Save
To unlock all custom picture modes:
Menu > Picture > Picture Mode Edit > Lock Picture Mode > O >
Enter Your PIN
Lock Picture Mode
Create a picture control PIN to prevent changes to all custom picture modes.
New PIN
Confirm PIN
1
2
3
4
5
6
7
8
9
X
0
Cancel Save
Custom picture modes that are no longer needed can be deleted.
TIP: Inputs assigned to deleted custom picture modes become assigned to the Calibrated picture mode.
To delete a custom picture mode:
Menu > Picture > Picture Mode Edit > Delete Picture Mode > Delete
To delete the user created Custom 1
picture mode, select the Delete button.
Delete
Cancel

Resetting a Picture Mode

A preset picture mode that has been edited can be restored to the factory default settings.
To reset a customized preset picture mode:
Menu > Picture > Picture Mode Edit > Reset Picture Mode > Reset
TIP: To set a custom PIN code, see
page 31
.
Setting a System PIN Code on
20
ADJUSTING THE AUDIO SETTINGS
To adjust the audio settings:
Menu > Audio
Use the Navigation buttons to highlight the setting you wish to adjust, then press Left/Right Navigation buttons to change the setting:
TV Speakers — Turn the built-in speakers On or O. The built-in speakers automatically turn o if a sound bar is discovered.
Surround Sound — When set to On, enables surround sound suitable for sports and TV shows. Virtual:X
adds virtualized
height best for movies.
Volume Leveling — When set to On, DTS TruVolume
audio solution levels the TV
speaker volume.
Balance — Balance the audio loudness between the left and right TV speakers.
Bass — Increase or decrease the bass level.
Audio
TV Speakers
Surround Sound
Volume Leveling
Balance
Bass
Treble
Lip Sync
Digital Audio Out
Analog Audio Out
Dialogue Enhancer
Auto
Auto
Fixed
Off
Dialogue Enhancer — If enabled and the signal source includes
Dolby 5.1 AC-4 audio, then clarity of dialogue is enhanced.
SOUND BAR SETTINGS
If a VIZIO sound bar is detected and connected via CEC (HDMI ARC), sound bar settings will appear in the Audio menu. See
Adjusting the CEC Settings on page 31
settings.
To adjust the sound bar settings:
On
On
0
0
0
0
Menu > Audio > Sound Bar Settings
Use the Navigation buttons to highlight the setting you wish to adjust, then press Left/Right Navigation buttons to change the setting. See your sound bar manual for details on available settings.
to enable CEC under the System
Audio
Sound Bar Settings
EQ Mode
Bass
Treble
Night Mode
Virtual:X
Speaker Test
Info
Movie
Medium
Medium
Off
Off
Treble — Increase or decrease the treble level.
Lip Sync — Synchronize the display image with the audio track.
Digital Audio Out — Select the digital audio output format for both the optical and HDMI ARC audio devices.
- To hear talk back when Talk Back function is enabled, digital audio out must be set
to PCM.
TIP: You must select Digital for audio with more than two channels (e.g., 3.0, 5.0, etc.).
Analog Audio Out — Select Variable if you are controlling the volume with the TV remote. Select Fixed if an external audio device (sound bar or AV receiver) will control the volume.
TIP: Available sound bar menu settings will be specific to the type of VIZIO sound bar connected.
21
ADJUSTING THE NETWORK SETTINGS
Your TV is Internet-ready, featuring a built-in high-speed wireless internet adapter and an Ethernet port (model D43fM-K04 only).
TIP: If your TV is connected to a network with an Ethernet cable, you will not see the wireless network connection menu. You must unplug the Ethernet cable to set a wireless network connection.

Connecting to a Wireless Network

To connect to a wireless network whose network name (SSID) is being broadcast:
Menu > Network >
Network
Wired Connection
Wireless Access Points
Disconnected
Choose your network > Enter in the password > Connect
Test Connection
Hidden Networks
Manual Setup
Network Information

Testing Your Network Connection

To test your network connection:
Menu > Network > Test Connection

Connecting to a Hidden Network

To connect to a wireless network whose network name (SSID) is not being broadcast:
Enter Access Point Name
Enter your access point name. This is used to connect to an access point with a hidden SSID.
Menu > Network > Hidden
Network > Enter the Access Point
Name > Connect > Enter in the password

Changing the Manual Setup Settings

Advanced users can fine-tune the network settings using the Manual Setup feature. The security settings on your router may require you to enter the TV's MAC address.
To change advanced network settings:
Menu > Network > Manual Setup > DHCP > O
To nd the TV’s MAC address:
Menu > Network > Manual Setup
You can find your TV's MAC address at the bottom of the list. The MAC addresses for the connections in use are displayed:
RJ45 MAC — The Ethernet or RJ45 MAC
address may be needed to set up your network when you have connected the TV with an Ethernet (Cat 5) cable.
Wireless MAC — The Wireless (Wi-Fi) MAC
address may be needed to connect your TV to your Wi-Fi network.
To view network information
Menu > Network > Network Information
Manual Setup
DHCP
IP Address
Subnet Mask
Default Gateway
Pref. DNS Server
Alt DNS Server
RJ45 Mac
Wireless Mac
Off
__. __.__.__
__. __.__.__
__. __.__.__
__. __.__.__
__. __.__.__
0:0:0:0:0:0
0:0:0:0:0:0
To forget a saved network:
Highlight a saved wireless access point > OK > Forget
If you do not see your wireless network displayed, click on:
More Access Points > Highlight your wireless network > Enter in
the password > Connect
1. Use the Navigation and OK buttons to adjust each setting:
IP Address — The IP address assigned to the TV.
Subnet Mask — The subnet address.
Default Gateway — Your network’s default gateway address.
Pref. DNS Server — Your preferred domain name server address.
Alt. DNS Server — Your alternate domain name server address.
2. Use the Navigation buttons on the remote to highlight Save and press OK.
22
SETTING UP TV CHANNELS

Scanning for TV Channels

Skipping Channels

You can use the TV Channels menu to:
Find channels
Find new channels
Select channels to skip
Select analog audio mode
Select the language for digital audio
Set parental controls
TV Channels
Find Channels
Find New Channels
Skip Channel
Analog Audio
Digital Audio
Parental Controls
Stereo
English
The TV may need to scan for channels before it can display programs and their associated information. A channel scan is required for free over-the-air channels (using an antenna) and cable channels from an out-of-the-wall connection (without a cable box). Moving the TV to an area with different channels requires the TV to scan for channels again.
To perform an Auto Channel Scan:
Menu > TV Channels > Find Channels
Wait until the channel scan is 100% complete. Highlight Done and press OK.
Find Channels
Channels Found
Digital
Analog
45% Complete
8
12
If the channel scan is canceled, the channels that were already discovered are retained.
To perform a New Channel Scan:
Menu > TV Channels > Find New Channels
After a channel scan is completed, you may find that some channels are too weak to watch comfortably. There may also be some channels you do not want to view. You can remove these channels from the TV’s memory with the Skip Channel feature.
WARNING: Channels that have been removed with the Skip Channel feature can still be viewed if the channel is entered using
the number pad.
If you wish to completely block a channel from being viewed, see
Locking and Unlocking Channels on page 25
.
To remove a channel:
1. From the TV Channels menu, highlight
Skip Channel, and press OK. The Skip Channel menu is displayed.
2. For each channel you wish to remove, use
the Up/Down Navigation buttons on the remote to highlight the channel and press OK. A
appears to the right of each
Skip Channel
0 Test 0
1 Test 1
2 Test 2
3 Test 3
4 Test 4
channel you select.
A New Channel Scan saves the current channel map and scans for additional channels.
23

Changing the Analog Audio Language

Some analog over-the-air (free) and cable channels broadcast programs in more than one language. The TV’s Analog Audio feature allows you to listen to audio in an alternate language using Secondary Audio Programming (SAP).
To use the Analog Audio feature:
To use the Digital Language feature:
Menu > TV Channels > Digital Audio
Select the preferred audio language. Available languages or video description depend on the broadcast content.
Menu > TV Channels > Analog Audio
WARNING: Not all programs are broadcast in SAP. The Analog
Audio Language feature only works when the program being viewed is being broadcast with Secondary Audio Programming.
Stereo — More than one speaker channel is being used. Sounds may be dispersed through different speakers depending on how the audio is programmed.
SAP (Secondary Audio Programming) — Typically used for audio in a different language other than the native one used in the program.
Mono — All speakers are producing the same sound; there is no distinction between left or right sounds.
Analog Audio
Stereo
SAP
Mono
Digital Audio
English
Spanish / Video Description
French
24

Using Parental Controls

The TV’s parental controls allow you to prevent the TV from displaying certain channels or programs unless a PIN is used.
Accessing the Parental Controls Menu
To access the Parental Controls menu you must first set up a system PIN:
Locking and Unlocking Channels
When a channel is locked, it cannot be accessed. Locking a channel is a good way to prevent children from viewing inappropriate material.
To lock or unlock a channel:
Menu > TV Channels > Parental Controls > Channel Locks
2. For each rating type you want to block or unblock, use the Navigation buttons to highlight the rating type and press OK.
When the rating type is blocked, the Lock icon appears with this rating and all higher ratings cannot be viewed.
When the rating type is unblocked, the Lock icon appears Content with this rating and all lower ratings can be viewed.
locked. Content
unlocked.
TIP: to set a custom PIN code, see
page 31.
Setting a System PIN Code on
Menu > TV Channels > Parental Controls > Enter in PIN
The Parental Controls menu only appears when:
You are using the tuner to receive your TV signals, such as when you are using an antenna for Over-the-Air signals, or when connected to cable TV directly from the wall (no cable box).
You have a device connected using a composite video cable or a coaxial cable, such as a VCR, satellite or cable box, or DVR.
Enabling or Disabling Program Ratings
To manage program content according to its rating, you must first enable the
Program Rating feature.
TIP: Other devices have their own parental control settings.
Highlight the channel you want to lock or unlock and press OK.
When a channel is locked, the Lock icon appears accessible unless the system PIN is entered.
When a channel is unlocked, the Lock icon appears
locked. The channel is not
unlocked.
Blocking and Unblocking Content by Rating
A channel may sometimes broadcast programs that are meant for a variety of audiences (some for children and some for adults). You might not want to block the channel completely using a channel lock, but you can block certain programs from being viewed.
You can use the TV’s Rating Block feature to block content based on its rating.
To block or unblock content by its rating:
1. From the Parental Controls menu, highlight the content type you want to adjust and press OK:
USA TV — USA television program broadcasts.
USA Movie — USA movie broadcasts.
Canadian English — Canadian television program broadcasts.
If you want to block all unrated content, highlight Block Unrated Shows and use the Navigation buttons on the remote to select On.
To enable or disable the Block Unrated Shows setting:
Menu > TV Channels > Parental Controls > Block Unrated Shows
> O/On
Reset Locks
Reset all locks to default and clear all channel or ratings locks to the unlocked state.
To reset locks:
Menu > TV Channels > Parental Controls > Reset Locks
To enable or disable the Program Rating feature:
Menu > TV Channels > Parental Controls > Locks > O/On
Canadian Movie — Canadian movie broadcasts.
TIP: For a list of content ratings and their definitions, please visit:
www.tvguidelines.org.
25
ACCESSIBILITY SETTINGS

Setting Up Closed Captioning

VIZIO is committed to providing intuitive, user-friendly products. Your new VIZIO TV offers several accessibility features that can help you with easy navigation.
To access the Accessibility menu:
Menu > Accessibility
Accessibility
1. Captions — Activate and customize
analog and digital closed captions.
2. Video Description — If included by
the broadcaster, provides a narrated description of the action for the content.
*
3. Talk Back
Enables your TV to speak all
settings changes and adjustments using the remote in English.
4. Speech Rate — Adjusts the rate in which
Text-to-Speech is spoken. Select Slow, Normal (default), or Fast.
5. Zoom Mode — Enlarges a section of the
screen by approximately 200%.
TIP: You can also enable/disable accessibility features using the included remote. See
Using the Remote on page 11
Captions
Video Description
Talk Back
Speech Rate
Zoom Mode
O
O
Normal
Off
.
Your TV can display closed captions for programs that include them. Closed captions display a transcription of a program’s dialogue.
TIP: Closed Captioning is available for tuner and streaming content (if supported by the app). Note that most apps will support their own CC from within the app.
To activate or deactivate Cl
osed Captions for current content:
Menu > Accessibility > Captions > Closed Captions > O/On
— or —
Push the CC button on the remote.
1. Use the Navigation buttons on the remote to highlight either Analog or Digital Closed Captions.
2. Use the Left/Right Navigation buttons on the remote to select the caption channel you wish to display.
CC
Closed Captions
Closed Captions
Analog Closed Captions
Digital Closed Captions
Digital Style
Off
CC1
CS1
To access the Video Description menu:
Menu > Accessibility > Video Description > O/On
*
Available only in English.
IP: The Closed Captions menu does not appear when an
T
HDMI input is selected. Closed Captions are available when using the tuner.
26

Changing the Appearance of Digital Closed Captions

Digital closed captions can be displayed according to your preference. See the diagram to the right for an explanation of the parts of the closed caption area.
Typical choices include:
Opaque background, transparent window — Only a strip of background appears behind the text, expanding as the text appears.
This is the typical "As Broadcast" mode.
To change the appearance of digital closed captions:
Menu > Accessibility > Captions >
Digital Style
Use the Up/Down Navigation buttons on the remote to highlight the setting you wish to change, then use the Left/Right Navigation buttons to change the settings (choose "As Broadcast" to keep default settings):
Text Style — Change the font used for the
closed captioning text.
Text Size — Make the text larger or smaller.
Text Color — Change the color of the text.
Text Opacity — Change the transparency
of the text.
Text Edges — Change the effects at the edges of the text, such as raising the
edges or adding drop shadows.
Text Edges Color — Change the color of the text edge effects.
Digital Style
Text Style
Text Size
Text Color
Text Opacity
Text Edges
Text Edges Color
Background Color
Background Opacity
Window Color
Window Opacity
As Broadcast
Large
Blue
As Broadcast
As Broadcast
As Broadcast
As Broadcast
As Broadcast
As Broadcast
As Broadcast
Opaque background and window in the same color — When text appears, the entire line fills with color at once.
In the example below, the closed caption text is green, the background is black, and the window is red.
Tex t Background Window
Background Color — Change the color of the background directly behind
the text.
Background Opacity — Change the transparency of the background directly
behind the text.
Window Color — Change the color of the closed captioning box.
Window Opacity — Change the opacity of the closed captioning box.
CLOSED CAPTION TEXT SAMPLE
27
CHANGING THE SYSTEM SETTINGS

Changing the On-Screen Menu Language

Setting the Time

Using the System menu, you can:
Change the on-screen menu language
Set the time zone and local settings
Name the TV
Name an input
Hide inputs not in use
Choose the input selected at power on
Adjust the power mode settings
Set the USB power mode
Turn the power indicator on or off
Set up timers
Set a system PIN code
Adjust CEC settings
Manage paired mobile devices
System
Menu Language
Time
TV Name
Input Name
Hide from Input List
Input at Power On
Power Mode
USB Power
Power Indicator
Timers
System PIN Code
English
Living Room TV
Automatic
Eco Mode
Always On
O
Your TV can display the on-screen menu in different languages.
To change the on-screen menu language:
Menu > System > Menu Language
Menu Language
Highlight your preferred language and press OK.
English
Español
Français
To ensure the correct time is displayed when you press the INFO button, set the TV’s time zone (Automatic Time is the default setting):
Menu > System > Time > Time Zone
To turn Daylight Saving Time on or o:
1. Highlight Daylight Saving Time and press OK. The Daylight Saving Time menu
is displayed.
2. Choose On if it is currently Daylight Savings Time, O if it is Standard Time, or
Auto to have the system automatically detect Daylight Savings Settings.
To change Time Format:
Highlight Time Format and use the Left/Right Navigation buttons to change between a 12-hour format or 24-hour format.
Manage a voice remote control
28

Changing the TV Name

Renaming Devices on the Input Menu

Adjusting the Power Mode

Naming your TV helps differentiate it from other cast devices you may have in your home.
To edit your TV name:
Menu > System > TV Name > Enter a Name
TV Name
Living Room TV
You can rename the inputs to make them easier to recognize on the Input menu. For example, if you have a DVD player connected to the HDMI-1 input, you can rename that input to display “DVD Player.”
See
Changing the Input Source on page 14
.
To change the name of an input:
Menu > System > Input Name
To enter a custom name:
Highlight the Name Input row and press OK.
Enter your custom label using the on-screen keyboard and press OK.
TIP: The current input you are on will be the input name you are
changing. You cannot change every input (i.e. WatchFree+ or SmartCast inputs).
To Hide an Input from the List:
Menu > System > Hide from Input List
Your TV is set to Eco Mode by default. When the TV is powered off, the Eco Mode setting uses less than 0.5W of power. Quick Start Mode enables your display to power on faster and also to turn on when powered from another device (such as when you are casting onto the TV).
WARNING: Please note that by changing this setting, the energy consumptions required to operate this device will change.
To switch between Eco Mode and Quick Start Mode:
Menu > System > Power Mode
Highlight either Eco Mode or Quick Start Mode and press OK.
TIP: If you want to use a voice assistant to turn your TV on, make
sure Quick Start Mode is turned on.
Highlight the input name you would like to hide. Hidden inputs will not be displayed in the input list.
Use the Left/Right Navigation buttons to toggle from visible and hidden (not all inputs can be hidden).
To Choose the Input selected at power on:
Menu > System > Input at Power On
Highlight the input name you would like to have selected at power on.
SmartCast is the default setting.
29

Using the USB Power Feature

The USB port can be used to charge devices.
The two options for this feature are:
Always On — Power is always available.
O When TV O — Power is only available
with the TV is on.
USB Power
Always On
Off When TV Off
Turning the Power Indicator On or O
The power indicator on the front of your TV normally does not glow when the TV is on. You can change this setting if you prefer the light to be on.
To turn the Power Indicator Light On or O:
Menu > System > Power Indicator > O/On

Setting Timers

When activated, the TV’s timer will turn the TV off after a set period of time.
Setting the Auto Power O Feature
To help save energy, your TV is set by default to turn off after 10 minutes without a video or audio signal. This feature can be deactivated.
To set the Auto Power O feature:
Menu > System > Timers > Auto Power O > O

Using the Blank Screen Feature

To help save LED life, your TV screen can turn on or off while audio is streaming.
To setup a sleep timer:
Menu > System > Timers >
Sleep Timer
Use the Left/Right Navigation buttons on the remote to highlight the period of time after which you want the TV to go to sleep: 30, 60, 90, 120, or 180 minutes. If you don’t want the sleep timer to activate, change the setting to O.
Timers
Sleep Timer
Auto Power Off
Blank Screen
10 Minutes
To use the Blank Screen feature:
Menu > System > Timers > Blank Screen
Off
To exit Blank Screen, press any button (except the Volume and Mute buttons).
30

Setting a System PIN Code

You can set a system PIN to lock content and picture modes, as well as prevent accidental system resets. The first time you select System
PIN code, you will need to create a PIN.
To create a PIN:
Menu > System > System PIN Code >
Enter Your PIN > Save
WARNING: You will need to enter your current PIN code the next time you access this menu or if you'd like to change your PIN.
System PIN code
Change the PIN used for the System PIN.
New PIN
Confirm PIN
1
2
3
4
5
6
7
8
9
X
0
Cancel Save

Adjusting the CEC Settings

The CEC function on your TV enables you to control devices connected to an HDMI input with the VIZIO TV remote, without any programming
Menu > System > CEC
Select a setting and then press OK.
CEC — To use CEC, you must select Enable.
Device Discovery — To determine if your device is connected and supports CEC, select Device Discovery and then press OK.

CEC Audio Setup

Connect your audio device to the HDMI-1 (HDMI ARC) input on the TV. On your audio device, select the HDMI ARC input.
Using CEC, your VIZIO TV remote can control such features including (depending on specic device):
Power On/Off
Volume and mute
Play and pause

Managing Mobile Devices

Your TV can be paired with a mobile device so you can easily control your TV across multiple devices.
To see a list of paired devices or unpair a device:
Mobile Devices
Tom's Tablet
Frank's Phone
Work iPad
Menu > System > Mobile Devices
Highlight a device name to delete it and press OK.

Pairing the VIZIO Voice Remote

To pair your Voice Remote:
Menu > System > Voice Remote
Select Pair New Remote, then press and hold both the MIC and MUTE buttons for 5 seconds to launch pairing mode.
WARNING: Not all HDMI devices support CEC. See your device's user manual for details.
To use your successfully paired voice remote:
Press and hold the MIC button while speaking a command.
To check for voice remote updates:
Menu > System > Voice Remote > Check for Update
To unpair a remote:
Menu > System > Voice Remote > Unpair Remote
31
USING THE ADMIN & PRIVACY MENU

Performing a Reboot

Resetting the TV to Factory Default Settings

You can use the TV’s Admin & Privacy menu to restore the TV to its factory default settings as well as access other administrative settings.
Using the ADMIN & PRIVACY menu, you can:
Force the system to power off and on
View system information
View a customer service support code
Check for system updates
Reset the TV to factory settings
Enable or disable viewing data
Personalize advertising choices
View the VIZIO Privacy Policy
Start or stop the store demo mode
Admin & Privacy
Reboot TV
System Information
Support Code
Check for Updates
Reset to Factory Settings
Viewing Data
Advertising
VIZIO Privacy Policy
Store Demo
On
O
A reboot forces the TV to turn off then on again.
Menu > Admin & Privacy > Reboot TV

Viewing System Information

To view technical data and status information about your TV and network connection:
Menu > Admin & Privacy > System Information

Accessing the Support Code

Retrieve a customer service support code/PIN or access basic TV information to assist in a customer service interaction.
To retrieve your support code:
Menu > Admin & Privacy > Support Code

Checking for System Updates

To check for a system update:
Menu > Admin & Privacy > Check for Updates
All of the on-screen menu settings can be reset to the factory defaults.
WARNING: If you reset the TV to the factory default settings, all change you have made to the settings will be lost. This includes any wireless or picture settings.
To reset the TV to its factory default settings:
Menu > Admin & Privacy > Reset to Factory Settings
1. If you set a system PIN code, enter it when prompted.
2. The TV displays, “Select Reset to restore all TV settings to factory defaults."
3. Highlight Reset and press OK.
4. Wait for the TV to turn off. The TV will turn back on shortly afterward and the setup process will begin.
TIP: You can also reset the TV to default setting by pressing and holding (12 seconds) the power/input button located under the remote sensor. See
Power/Input Button on page 7.
If an update is found, the TV will ask to confirm the update. If no update is found, the screen will note "The TV is up-to-date."
32

Viewing Data

To turn viewing data on or o:
Menu > Admin & Privacy > Viewing Data
Use the Left/Right Navigation buttons to toggle from On or O

About Viewing Data

WHAT IS VIEWING DATA AND HOW IS IT COLLECTED?
VIZIO Smart TVs have built-in Automated Content Recognition technology that can understand viewing behavior and usage including audio and video programming, ads, gaming content and OTT apps in real-time
Viewing Data is associated with IP address for the unit and a unique device number we assign. If available, we may associate Viewing Data with the VIZIO Account associated with the device, and email or other contact information (such as hashed/ encrypted versions of your email address or other identifier).
HOW IS VIEWING DATA USED?
Create or recommend more relevant programming on VIZIO services, channels, and on third party websites, mobile apps, platforms and devices. Improve our products and services. Tailor the advertising you see on your Smart TV or across various VIZIO and third party platforms or devices, including other devices associated with your IP Address, device ID, email address or VIZIO account on the basis of your Viewing Data. Measure and understand the reach, viewership, and effectiveness of advertising, and provide advertising analytics and reporting. Help our ad partners reach the desired audience and understand and improve their ad campaigns. For other marketing purposes, including sending you emails and text messages about products, events, promotions and offers from VIZIO, partners or advertisers (where you have given your separate consent to receive emails and text messages).
WHAT DOES THIS MEAN TO ME?
You can choose whether to enable the collection and usage of Viewing Data for these purposes now or at any time on your Device by directing your remote to:

Reset TV Advertiser ID

An Identifier for Advertising — can be reset to a new identifier at any time.
To reset the TV Advertiser ID:
Menu > Admin & Privacy > Advertising > Reset TV Advertiser ID
> OK

Ad Replacement

Replaces Standard Ads with Personalized Ads in Linear TV.
To turn Ad Replacement on or o:
Menu > Admin & Privacy > Advertising > Ad Replacement
Use the Left/Right Navigation buttons to toggle from On or O.
We may use Viewing Data along with information from data brokers or advertisers, such as demographic data, smartphone location, web history, and purchasing history, and usage information such as how much time was spent viewing content.
WHO DO WE SHARE VIEWING DATA WITH?
We share Viewing Data with authorized data partners, by licensing Viewing Data to analytics companies, media companies, advertisers, ad agencies, and other ad tech companies who measure ad effectiveness or aid personalization of ads.
Our authorized cloud service providers may also store this data on and solely on our behalf and for no other purpose.
Settings > Menu > Admin & Privacy > Viewing Data
You can turn off or reset various interest-based Advertising settings at:
Settings > Menu > Admin & Privacy > Advertising
More information about our Viewing Data and Advertising practices is available below, in our Privacy Policy, at vizio.com, or also available under:
Settings > Menu > Admin & Privacy

Managing Advertising Settings

Your advertising choices can be personalized.

Limited Ad Tracking

When enabled, TV Ad ID will not be passed or used for personalized ads on this device.
To turn on or o:
Menu > Admin & Privacy > Advertising > Limited Ad Tracking
Use the Left/Right Navigation buttons to toggle from On or O.

View VIZIO Privacy Policy

To view VIZIO Privacy Policy:
Menu > Admin & Privacy > VIZIO Privacy Policy > OK

Store Demo

To set to O, Demo 1, or Demo 2:
Menu > Admin & Privacy > Store Demo

User Manual

To display the User Manual on the screen:
Menu > Admin & Privacy > User Manual
33
USING THE INFO WINDOW
After switching inputs or changing channels on the tuner, the Info window will display.
When using the Tuner, you can also access the window by pressing the OK button on the remote and then selecting the INFO button on the virtual number pad.
The Info window displays:
TV name
Current input or
tuner channel Picture AspectResolution
Audio Type
*
Network Name
Current input or current tuner channel
Picture resolution
Picture aspect
Audio type
Network name
Time
TV Name
Living Room
HomeWiFi
5:00 PMStereoHDMI-1 Normal1080p
Time
* When TV speakers are off and Dolby Atmos content is passed through the TV to a sound bar or other audio
device, the Dolby Atmos icon will display with "Audio Out."
34

VIZIO Smart TV Platform

KIDS CORNER
MOVIES
FREE CHANNELS
SHOWS
APPS
LEARN
EXTRAS

What is the VIZIO Smart TV Platform?

The VIZIO Smart TV Platform lets you discover, stream, and control your content like never before! Access top apps, like Netflix, Disney+, and Hulu, by using the remote to easily browse and launch content directly from the home screen. The VIZIO Smart TV home screen makes finding something to watch easy and fun.

Launching the VIZIO Smart TV Platform

To begin streaming with the VIZIO Smart TV Platform:
Press the Home button on your remote.
—or—
Select SmartCast from the list of inputs.
Search
Find TV shows, movies, and more
Marquee Content
Launch content with one click

What you can do with the VIZIO Smart TV Platform

Stream high quality entertainment.
Launch top tier apps directly from the home screen.
Access free channels to watch without a subscription through WatchFree+.
Rearrange apps on your home screen to make it just the way you like it.
Mirror your laptop or mobile device onto your TV through Apple Airplay or Chromecast built-in.
Use Google Assistant, Siri, and Alexa-enabled devices for hands-free voice control.

Controlling your TV with the VIZIO Mobile App

Download the VIZIO Mobile App and turn your smartphone into a remote to control and configure your TV.
With the VIZIO Mobile App, you can:
Power on/off devices, play/pause content, and modify advanced settings, all from the palm of your hand.
Easily enter text onto your TV/display from your mobile device using a full keyboard.
Browse and discover movies, TV shows, music, live streams, and more, across multiple apps at once.
Access a quick look at show ratings, synopsis, cast, crew, clips, and other details.
Scan to download.
Scan with your phone camera or QR reader.
vizio.com/smartcastapp
Quick Access to Popular Apps
Home Button
New Episodes Added
Streaming Apps on your TV
Discover
New or popular content across multiple apps
Visit www.vizio.com/smartcastapp for minimum requirements.
35

WatchFree+

What is WatchFree+?

VIZIO WatchFree+ takes your cord-cutting entertainment experience one step further! With the simple press of a button, enjoy free streaming TV with hundreds of live TV channels to choose from – news, movies, sports, comedy, music and more. A built-in on-screen guide makes finding something to watch easier than ever.
And it’s all FREE —no fees, no subscriptions, or logins.

What you can do with WatchFree+

Stream hundreds of live TV channels absolutely free – news, movies, sports, comedy, music and more.
Navigate through channels, organized by genre, with an intuitive on-screen guide.
Watch the best of internet TV.
No logins, subscriptions, or transactions fees.
Show Details
Find out show information.
NOW • Program
WatchFree+

How to Launch WatchFree+

To launch and begin watching entertainment offered on WatchFree+:
Press the WatchFree+ button on your remote.
—or—
Select WatchFree+ from the list of inputs or app row.
On-Screen Guide
Hundreds of live TV and audio channels organized by genre.
RECENT
FAVORITES
FEATURED
MOVIES + TV
NEWS + OPINIO N
SPORTS
CRIME
HOME + DIY
GAME S HOWS + REALIT Y
INTERE STS + LIFESTYLE
KIDS + FAMILY
CHANNEL
250
NOW • Program
NEXT in 22m • Program
Content Title, 2021
30m
Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh
euismod tincidunt ut laoreet dolore magna aliquam erat volutpat. Ut wisi enim adis...
NOW • Program
NOW • Program
WatchFree+ Button
OK Button
Press the OK button to return to the WatchFree+ on-screen guide. Use the Up/Down Navigation buttons to scroll through the guide
.
36

Playing USB Media

The USB Media Player allows you to connect a USB flash drive to your TV and play music, video, or photos.

Preparing Your USB Drive to Play USB Media

To display USB media, you must first save your videos onto a USB flash drive:
The USB flash drive must be formatted as FAT32.
Files on the USB flash drive must end in a supported file extension ( .mp3, .jpg, etc).
The player is not designed to play media from external hard drives, MP3 players, cameras, or smartphones.

Displaying USB Media

To display your USB media:
1. Connect your USB flash drive to the USB port on the side of the TV.
2. The TV will recognize the USB. Use the Navigation buttons on the remote to select the content you want to play.
—or—
3. Select USB from the bottom streaming icons on the VIZIO Smart TV home screen.

Removing the USB Drive from the TV

To safely remove your USB flash drive from the TV:
1. Turn the TV O.
2. Disconnect your USB flash drive from the USB port on the side of the TV.
WARNING: Do not remove the USB drive while the TV is On. Doing so may damage the drive.
Note: The image shown here is for illustrative purposes only and may be subject to change. The actual number of ports and their locations may vary, depending on the model.
TIP: You can display your photos in Fullscreen. Select the photo, press OK, then highlight Fullscreen and press OK.
37

Playing USB Media: Music

Back Button Highlight this button and press OK to return to the previous screen.
Connected Sources
Displays connected USB devices.
Current Folder
Playback Control
Toggle Music/Photos
Music
USB1: MyFlashDrive
My Music
Browse Photos
Now Playing Information
Displays song title, album title, and other information.
Name: Title: Artist: Album: Duration: Director: Genre: Year: Copyright: Protected: File Size:
MyFlashDrive\Audio\root\My Music
#
Track Album Artist Duration
Starry Summer
1
2
Summer Nights DJ Sunset 3:11
3
Mango Dream Ana Banana 8:46
4
Crystal Waters The Dash 4:21
5
Smooth Waves Rio Steve 7:58
02 Summer Nights Summer Nights DJ Sunset Summer 00:03:11
­Electro 2020
­No
8.3M
Progress Bar
Displays the duration of the currently­playing song. The bar will lengthen as the song progresses.
1:50 3:11
Summer JCheesy 2:42
Summer
Beach Mix
Beach Mix
Breezy Mix
Album Art
If included on the USB thumb drive and associated with your music, the album art will display here.
Sort by Album/Artist/Track
Artist A-Z
Sort:
View:
Artist: A - Z
Folders
All
View All or View Folders
Toggle between viewing all content and only viewing folders.
Folder Contents/Playlist
This area displays the contents of the currently selected folder. You can browse among files using the Navigation and OK buttons on the remote.
Page 1 of 1
Page Information If your USB thumb drive has more files than can be displayed on a single screen, the page number is displayed here.
38

Playing USB Media: Video

Back Button Highlight this button and press OK to return to the previous screen.
Connected Sources
Displays connected USB devices.
Current Folder
Video
USB1: MyFlashDrive
My Videos
File Name: Family Vacation - California
Resolution: 3840 x 2160
Audio: AAC
Press OK for full screen.
00:03:22 00:23:43
MyFlashDrive\Video\root\My Videos
#
File Date Duration
Family Vacation - California
1
28th Birthday Party
Korea 2019
Sunny’s Graduation
-
-
-
-
Preview Window
00:23:43
00:38:182
00:41:083
00:25:324
Sort by Date or File Name
View All or View Folders
Toggle between viewing all content
and only viewing folders.
Sort:
View:
Play
Date New-Old
Folders
Once
Play once or continuously
Folder Contents/Playlist
This area displays the contents of the currently selected folder. You can browse among files using the Arrow and OK buttons on the remote.
Page 1 of 1
Page Information If your USB thumb drive has more files than can be displayed on a single screen, the page number is displayed here.
39

Playing USB Media: Photo

Back Button Highlight this button and press OK to return to the previous screen.
Connected Sources
Displays connected USB devices.
Current Folder
Start Fullscreen Slideshow
Sort by Date or File Name
View Thumbnails/Folders
Adjust Slideshow Settings
Photo
USB1: MyFlashDrive
root
Start Slideshow
Name A-Z
Sort:
View:
Thumbnails
Settings
Back Button
Highlight and press OK to return to left column.
VIZIO_2GB\Photo\root
A.jpg
D.jpg
Current Folder
Displays the folder path.
Folder Contents/Playlist
This area displays the contents of the currently selected folder. You can browse among files using the Navigation and OK buttons on the remote.
B.jpg C.jpg
E.jpg F.jpg
View Music Files
Browse Music
File Name: D 1920x1080
Resolution: 1920x1080
Size: 1607270KB
Photo Information
Displays the name, resolution, and file size of the selected photo.
G.jpg
H.jpg I.jpg
Page 1 of 1
Page Information
If your USB thumb drive has more files than can be displayed on a single screen, the page number is displayed here.
40

Product Registration and Support

Get helpful tips and register your TV.
Scan with your phone camera or QR reader.

Customized Support

Get live assistance quickly with your information on hand.
News and Oers
Take advantage of the latest news and special oers from VIZIO.

Updates and Enhancements

Stay up-to-date with important product updates and notications.
More questions? Find answers at:
SUPPORT.VIZIO.COM
41

Help Topics

The remote is not responding.

Make sure the batteries are properly inserted matching the - and + symbols.
Replace the batteries with fresh ones.

The TV displays “No Signal.”

Look behind your TV to see where your device is connected. There will be a name next to the port you are using.
Make sure your device is powered on.
Press the INPUT button on the TV remote control and choose the port your
device is connected too.
If you are using cable TV or antenna connected directly to the TV, scan for channels. See
Scanning for TV Channels on page 23
.

There is no power..

Ensure the power cable is securely attached to the TV and outlet. Some models
do not have a detachable power cable.
The sound is at or dialog is not audible.
Turn off Volume Leveling. See
Adjusting the Audio Settings on page 21.
Where do I nd information on the accessibility features of this product and other VIZIO products?
Please visit vizio.com/accessibility,
Email us at: Accessibility@vizio.com, or
Give us a call at 1-877-698-4746.
How do I stream apps like Netix to my VIZIO Smart TV?
Popular apps are located on the VIZIO Smart TV home screen, so you can simply navigate to the app row on your home screen to start streaming.
You can also use Apple AirPlay 2 or Chromecast built-in to stream content from your device directly to your Smart TV. For more information, please visit:
VIZIO.com/Apple
VIZIO.com/Google
Image quality can vary depending on what program you are watching, and what device or app you are using to watch it. For the best picture quality, VIZIO recommends watching HD content. You can contact your device manufacturer or app provider for more information about their video playback quality.
For the best image quality, view high-definition programs using digital sources. Connect your devices with HDMI cables.
If you are using an antenna, the signal strength of the channel may be low. Ensure your antenna is connected securely to the TV and move the antenna around the room or close to a window for the best signal.

The picture is distorted.

Move the TV away from electrical appliances, cars, and fluorescent lights.
Ensure all cables are securely attached.

The TV image does not cover the entire screen.

If you are using TV, AV, or Component with 480i input, go to Menu > Picture > Picture Aspect to adjust the Aspect Ratio.
Ensure the outlet the TV is connected to is working. You may want to connect another device to the outlet to ensure the devices are receiving power.
Press the Power/Standby button on the remote or on the bottom of the TV to turn the TV on.

The power is on, but there is no image on the screen.

Ensure all devices are connected securely and correctly. See your connected
device’s user manual for details.
Ensure your TV is powering on. When your TV powers on, a light on the remote
sensor will turn on. See
Press the MENU button on your remote control. If you can see the menu, try to adjust Brightness, Contrast, or Backlight. See
page 15
Press the INPUT button on the remote to select a different input source.
.
Front Panel on page 7
.
Adjusting the Picture Settings on

The colors on the TV don’t look right.

Adjust the Color and Tint settings in the Picture menu. See
Picture Settings on page 15.
Select a pre-set picture mode. VIZIO recommends selecting Calibrated.
Check all cables to ensure they are securely attached.
Adjusting the

The image quality is not good.

Image quality can vary depending on personal preference and environmental factors like how much light is in a room. Your TV includes a variety of picture settings and preset picture modes that can be adjusted to calibrate this TV to your preference. See
Adjusting the Picture Settings on page 15.

The TV has pixels (dots) that are always dark.

Your HD TV is precision-manufactured using an extremely high level of technology. However, sometimes pixels may not display correctly. These types of occurrences are inherent to this type of product and do not constitute a defective product.

The buttons on the remote aren’t working.

Ensure you are only pressing one button at a time.
Point the remote directly at the TV when pressing a button.
Replace the remote batteries with fresh ones. See
page 11
Remove any obstacles that may be blocking the remote sensor on the TV.
.
Replacing the Batteries on
42
Help Topics

There is no sound.

Press Volume Up on the remote control.
Press the MUTE button on the remote to ensure mute is off.
Check the audio settings to ensure your TV speakers are set to On. See
Adjusting the Audio Settings on page 21
Check the audio connections of external devices (Blu-ray player, game console,
cable/satellite box) that are connected to the TV.
If you are using an antenna, the signal strength of the channel may be low.
Ensure your antenna is connected securely to the TV and move the antenna around the room or close to a window for the best signal.
Use ARC mode.
.

How do I download the VIZIO Mobile App?

1. Make sure your phone or tablet is connected to a Wi-Fi network. Open a browser on your phone or tablet.
2. Navigate to vizio.com/smartcastapp and follow the on-screen instructions to download the VIZIO Mobile App.

How do I connect to my Wi-Fi network?

On your TV remote, press the MENU button then go to Network > Select your
Wi-Fi name > Enter password.

How do I exit Demo Mode?

Press and hold the INPUT button on the back of the TV to exit the demo mode.

How do I watch Cable/Antenna TV channels?

If you subscribe to cable or satellite, simply connect an HDMI cable (not included) to the receiver.
If you use external antennas to watch local broadcast channels, use a coaxial cable to connect the antenna.

Some of my Channels are missing.

Press the MENU button on your TV remote and select the TV Channels option, then select Find Channels.
Open the VIZIO Mobile App on your phone or tablet.

How do I change the Inputs?

Press the INPUT button on the back of the TV to cycle through the Inputs.
Press the INPUT button on the basic remote to cycle through the Inputs.
Make sure the VIZIO Mobile App is installed on your phone or tablet. Open the
VIZIO Mobile App. Tap on the Device list and select your TV. Tap on the INPUT button and select the Input of your choice.
Click on: Menu Tab > SmartCast Devices > Your TV/Device Name > Channels > Find Channels

How do I disable/enable Viewing Data?

Press the MENU button on your remote and select Admin & Privacy. Then select Viewing Data to turn the feature On or Off.

The television will not turn on using Alexa or Google Assistant.

Ensure the television is in Quick Start Mode.
Click on: Menu > System > Power Mode > Quick Start
43
Specications
D24fM-K01 D32fM-K01 D40fM-K09 D43fM-K04
Size 24” 32" 40" 43"
Viewable Area 23.5" 31.5" 39.5" 42.5"
PRODUCT DIMENSIONS
Dimensions w/ Stand
Dimensions w/o Stand
Weight w/ Stand 5.95 lb (2.7 kg) 8.53 lb (3.87 kg) 12.26 lb (5.56 kg) 15.06 lb (6.83 kg)
Weight w/o Stand 5.86 lb (2.66 kg) 8.40 lb (3.81 kg) 12.08 lb (5.48 kg) 14.88 lb (6.75 kg)
Mounting Screw Size
Hole Pattern 100 mm x 100 mm 100 mm x 100 mm 200 mm x 100 mm 200 mm x 100 mm
# of Screws (not included) 4 4 4 4
PICTURE QUALITY
Maximum Resolution 1920 x 1080 (FHD) 1920 x 1080 (FHD) 1920 x 1080 (FHD) 1920 x 1080 (FHD)
LCD Backlight Full Array LED Full Array LED Full Array LED Full Array LED
Refresh Rate 60 Hz 60 Hz 60 Hz 60 Hz
VRR 40-60 Hz FreeSync 40-60 Hz FreeSync 40-60 Hz FreeSync 40-60 Hz FreeSync
INPUTS / OUTPUTS
HDMI Inputs 2 2 2 2
Ethernet Input 0 0 0 1
RF Antenna Input 1 1 1 1
USB 1 1 1 1
Audio Output HDMI ARC, Analog Stereo Out
21.22" x 14.37" x 6.32"
539 x 364.90 x 160.6 mm
21.22" x 12.91" x 3.02" 539 x 328 x 76.8 mm
M4 x 8 mm M6 x 8 mm
28.09" x 18.87" x 7.07"
713.60 x 479.30 x 179.6 mm
28.09" x 16.79" x 3.13"
713.60 x 426.40 x 79.6 mm
HDMI ARC, Analog Stereo Out,
Digital Optical
35.15" x 22.26" x 8.81"
892.80 x 565.40 x 223.80 mm
35.15" x 19.91" x 3.13"
892.80 x 505.71 x 79.50 mm
M6 M4
HDMI ARC, Analog Stereo Out,
Digital Optical
37.6" x 24.1" x 9.4"
955 x 612.10 x 237.90 mm
37.6" x 21.7" x 2.6"
955 x 551.20 x 66 mm
HDMI ARC, Analog Stereo Out,
Digital Optical
OTHER
Remote Control Voice Remote Voice Remote Voice Remote Voice Remote
Power Consumption 28.89 W 36.94 W 54 W 75 W
Standby Power <0.5 W <0.5 W <0.5 W <0.5 W
Voltage
OSD Language English, French, Spanish English, French, Spanish English, French, Spanish English, French, Spanish
Certication
HDMI (CEC, ARC), Dolby Audio,
DTS Virtual: X, DTS-HD
120V 120V 120V 120V
UL, FCC Class B,
HDMI (CEC, ARC), Dolby Audio,
UL, FCC Class B,
DTS Virtual: X, DTS-HD
UL, FCC Class B,
HDMI (CEC, ARC), Dolby Audio,
DTS Virtual: X, DTS-HD
HDMI (CEC, ARC), Dolby Audio,
DTS Virtual: X, DTS-HD
UL, FCC Class B,
44

Regulatory Information

FCC Class B Radio Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Caution Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Notice The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such interference.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Operations in the 5GHz products are restricted to indoor usage only.
This equipment complies with FCC/ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Canada Notice for License-Exempt Radio Apparatus

This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This device operates on a no-protection no-interference basis. Should the user seek to obtain protection from other radio services operating in the same TV bands, a radio license is required. Please consult Industry Canada’s document CPC-2-1-28, Optional Licensing for Low-Power Radio Apparatus in the TV Bands, for details.
Cet appareil est conforme aux CNR exempts de licence d’Industrie Canada. Son fonctionnement est sujet aux deux conditions suivantes:
1. le dispositif ne doit pas produire de brouillage préjudiciable, et
2. ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable
Cet appareil fonctionne sur une base sans protection et sans interférence. Dans le cas où l’utilisateur cherche à obtenir de la protection des autres services de radio fonctionnant sur les mêmes bandes TV, aucune license est requise. Veuillez consulter le document CPC-2-1-28 d’Industrie Canada, License optionnelle pour les appareils radio de faible puissance, pour plus de détails.
Industry Canada Class B emission compliance statement
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
45

Limited Warranty

UNITED STATES AND CANADA By using this VIZIO product, you accept all VIZIO Terms and Conditions, including all the Terms of Warranty, BINDING ARBITRATION AGREEMENT (for U.S. Residents Only), and Class Action Waiver. If you do not agree to the
terms of this warranty, do not use the VIZIO product and, within thirty (30) days of the date of purchase, return it for a refund to the authorized retailer where you purchased it.
Arbitration Agreement and Class Action Waiver within 60 calendar days of your purchase. Please refer to the full section "Binding Arbitration Agreement;
Class Action Waiver" below for more details and instructions for opt-out. Full Terms and Conditions may be viewed at vizio.com/en/terms/terms-of-service.

How Long This Warranty Lasts

For non-commercial use, VIZIO warrants the product on the terms set forth below for one (1) year from the date of original purchase. For commercial use, VIZIO warrants this product on the terms set forth below for ninety (90) days from the date of original purchase.

What This Warranty Covers

VIZIO warrants the product against defects in materials and workmanship when the product is used normally in accordance with VIZIO’s user guides and manuals. Except where restricted by law, this warranty applies only to the original purchaser of a new product. The purchase must have been made from an authorized retailer in the United States (including Puerto Rico) or Canada. The product must also be located in the country where it was purchased at the time of warranty service.

Zero Bright Pixel Defect Guarantee (Displays Only)

Your product may qualify for a warranty against “zero bright pixel” defects for the duration of the warranty on select new product purchases. To determine if this guarantee applies to your product, refer to the model’s product information page at www.vizio.com, look for the “zero bright pixel” guarantee on the box, or contact VIZIO Technical Support at the email address or telephone number below.

How to Get Service

Before obtaining warranty service, you may visit www.vizio.com for additional help and troubleshooting. To obtain warranty service, contact VIZIO Customer Support by going to
If you live in the U.S., you have the right to opt out of the
support.vizio.com and selecting Contact Us.

Your Obligations Before Service

You must obtain pre-authorization before sending your product to a VIZIO service center. You may be required to supply a purchase receipt (or copy) to show that the product is within the warranty period. When you return a product to a VIZIO service center, you must ship the product in its original packaging or in packaging that aords an equal degree of protection. VIZIO Technical Support will provide instructions for packing and shipping the product to the VIZIO service center. ALL USER DATA AND DOWNLOADED APPLICATIONS STORED
ON A PRODUCT WILL BE DELETED IN THE COURSE OF SOME INHOME AND
ALL SHIP-IN WARRANTY SERVICE. If this occurs, your product will be restored to its original state. You will be responsible for restoring all applicable user data and downloaded applications. Recovery and reinstallation of user data and downloaded applications is not covered under this warranty. In order to protect your personal information, VIZIO recommends that you always clear all personal information from the product before it is serviced, regardless of the servicer.

VIZIO’s Responsibilities

If VIZIO determines that a product is covered by this warranty, VIZIO will (at its option) repair or replace it, or refund the purchase price to you. There will be no charge for parts or labor during the warranty period. Replacement parts may be new or recertied at VIZIO’s option and sole discretion. Replacement parts and VIZIO’s labor are warranted for the remaining portion of the original warranty or for ninety (90) days from warranty service, whichever is longer.

Types of Service

TVs that are 32 inches or larger will usually be serviced in-home. In-home service requires complete and easy access to the product and does not include de-installation or re-installation of the product. In-home service is subject to availability. VIZIO will provide other service options when in-home service is not available. All other VIZIO products must be sent to a VIZIO service center to obtain warranty service. VIZIO is not responsible for transportation costs to the service center, but VIZIO will cover return shipping to the customer.

What This Warranty Does Not Cover

This warranty does not cover: (a) cosmetic damage; (b) normal wear and tear; (c) improper operation; (d) improper voltage supply or power surges; (e) signal issues; (f) damage from shipping; (g) acts of God; (h) customer misuse, modications or adjustments; (i) installation, set-up, or repairs attempted by anyone other than by a VIZIO authorized service center; (j) products with unreadable or removed serial numbers; (k) products requiring routine maintenance; or (l) products sold “AS IS”, “CLEARANCE”, “FACTORY RECERTIFIED”, or by a non-authorized reseller.
What to Do If You Are Not Satised With Service
If you feel VIZIO has not met its obligations under this warranty, you may attempt to resolve the issue informally with VIZIO. If you are unable to resolve the issue informally and wish to le a formal claim against VIZIO, and if you are a resident of the United States, you must submit your claim to binding arbitration according to the procedures described below, unless an exception applies. Submitting a claim to binding arbitration means that you do not have the right to have your claim heard by a judge or jury. Instead your claim will be heard by a neutral arbitrator.

Binding Arbitration Agreement; Class Action Waiver (U.S. Residents Only)

UNLESS YOU HAVE BROUGHT AN ELIGIBLE CLAIM IN SMALL CLAIMS COURT OR HAVE OPTED OUT AS DESCRIBED BELOW, ANY CONTROVERSY OR CLAIM RELATING IN ANY WAY TO YOUR VIZIO PRODUCT, INCLUDING ANY CONTROVERSY OR CLAIM ARISING OUT OF OR RELATING TO THIS WARRANTY, A BREACH OF THIS WARRANTY, OR THE VIZIO PRODUCT’S SALE, CONDITION OR PERFORMANCE, WILL BE SETTLED BY BINDING ARBITRATION ADMINISTERED BY THE AMERICAN ARBITRATION ASSOCIATION AND CONDUCTED BY A SINGLE ARBITRATOR APPOINTED BY THE AMERICAN ARBITRATION ASSOCIATION, IN ACCORDANCE WITH ITS COMMERCIAL ARBITRATION RULES AND ITS SUPPLEMENTARY PROCEDURES FOR CONSUMER-RELATED DISPUTES. You may learn more
about the American Arbitration Association and its rules for arbitration by visiting www.adr.org. Since this warranty concerns a transaction in interstate or international commerce, the Federal Arbitration Act will apply. The ling fees to begin and carry out arbitration will be shared between you and VIZIO, but in no event will your fees ever exceed the amount allowable by the American Arbitration Association, at which point VIZIO will cover all additional administrative fees and expenses. VIZIO waives its right to recover attorneys’ fees in connection with any arbitration under this warranty. If you are the prevailing party in an arbitration to which the Supplementary Procedures for Consumer-Related Disputes applies, then you are entitled to recover attorneys’ fees as the arbitrator may determine. The dispute will be governed by the laws of the state or territory in which you resided at the time of your purchase (if in the United States). The place of arbitration will be Irvine, California, or your county of residence (if in the United States). The arbitrator will have no authority to award punitive or other damages not measured by the prevailing party’s actual damages, except as may be required by statute. The arbitrator will not award consequential damages, and any award will be limited to monetary damages and will include no equitable relief, injunction, or direction to any party other than the direction to pay a monetary amount. Judgment on the award rendered by the arbitrator
46
will be binding and nal, except for any right of appeal provided by the Federal Arbitration Act, and may be entered in any court having jurisdiction. Except as may be required by law, neither you nor VIZIO nor an arbitrator may disclose the existence, content, or results of any arbitration under this warranty without the prior written consent of you and VIZIO. ANY DISPUTE, WHETHER IN ARBITRATION, IN COURT, OR OTHERWISE, WILL BE CONDUCTED SOLELY ON AN INDIVIDUAL BASIS. VIZIO AND YOU AGREE THAT NO PARTY WILL HAVE THE RIGHT OR AUTHORITY FOR ANY DISPUTE TO BE ARBITRATED AS A CLASS ACTION, A PRIVATE ATTORNEY GENERAL ACTION, OR IN ANY OTHER PROCEEDING IN WHICH EITHER PARTY ACTS OR PROPOSES TO ACT IN A REPRESENTATIVE CAPACITY. NO ARBITRATION OR PROCEEDING WILL BE JOINED, CONSOLIDATED, OR COMBINED WITH ANOTHER ARBITRATION OR PROCEEDING WITHOUT THE PRIOR WRITTEN CONSENT OF ALL PARTIES TO ANY SUCH ARBITRATION OR PROCEEDING.

Opt-Out Instructions IF YOU DO NOT WISH TO BE BOUND BY THE BINDING ARBITRATION AGREEMENT AND CLASS ACTION WAIVER, THEN: (1) you must notify VIZIO in writing within sixty (60) days of the date that you purchased the product; (2) your written notication must be mailed to VIZIO at 39 Tesla, Irvine, CA 92618, Attn: Legal Department; and (3) your written notication must include (a) your name, (b) your address, (c) the date you purchased the product, and (d) a clear statement that you wish to opt out of the binding arbitration agreement and class action waiver. In addition, you may pursue a claim in small claims court in your county of residence (if in the United States) or in Orange County, California. In such case the provisions of the section titled “Binding Arbitration Agreement; Class Action Waiver (U.S. Residents)” will not apply.

Exclusions and Limitations

TO THE GREATEST EXTENT PERMITTED BY APPLICABLE LAW, THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE DESCRIBED ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WILL BE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE. SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. VIZIO WILL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR DATA, COMMERCIAL LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, EVEN IF VIZIO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND
EVEN IF THE REMEDY FAILS OF ITS ESSENTIAL PURPOSE. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. IN LIEU OF ANY OTHER REMEDY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER (INCLUDING VIZIO’S NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS, NO MATTER WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT), VIZIO MAY, AT ITS SOLE AND EXCLUSIVE OPTION AND IN ITS DISCRETION, REPAIR OR REPLACE YOUR PRODUCT, OR REFUND ITS PURCHASE PRICE. AS NOTED, SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

How the Law Applies

This warranty gives you specic legal rights, and you may also have other rights, which vary from state to state and province to province. This warranty applies to the greatest extent permitted by applicable law.

General

No employee or agent of VIZIO may modify this warranty. If any term of this warranty, other than the class action waiver, is found to be unenforceable, that term will be severed from this warranty and all other terms will remain in eect. If the class action waiver is found to be unenforceable, then the entire section titled “Binding Arbitration Agreement; Class Action Waiver (U.S. Residents Only)” will not apply. This warranty applies to the maximum extent not prohibited by law.

Changes to Warranty

This warranty may change without notice, but any change will not aect your original warranty. Check www.vizio.com for the most current version.
47

Legal Information

Software Licenses

All software is provided subject to a software license agreement(s) and you agree that you will be bound by such license agreement(s) in addition to these terms. Your use of this product is subject to VIZIO’s privacy policy, which may be updated from time to time, and is available to view at vizio.com/privacy.

Export Regulations

Customer acknowledges that the VIZIO products, which include technology and software, are subject to customs and export control laws in the United States (“US”). The products may also be subject to the customs and export control laws and regulations of the country in which the products are manufactured and/or received.

Internet Connectivity and App Availability

Network conditions, environmental and other factors may negatively affect connectivity and the resulting video quality, if any. The applications and content of the applications pictured herein or described in accompanying documentation may only be available in certain countries or languages, may require additional fees or subscription charges, and may be subject to future updates, modifications or discontinuation without notice. VIZIO has no control over third party applications or content and assumes no responsibility for the availability or interruption of such applications or content. Additional third party terms, conditions and restrictions apply.

© 2022 VIZIO, Inc. All Rights Reserved.

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS, Inc. DTS, DTS-HD, Virtual:X, and the DTS-HD logo are registered trademarks or trademarks of DTS, Inc. in the United States and other countries. © 2021 DTS, Inc. ALL RIGHTS RESERVED.
Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories. Confidential unpublished works. © 1992-2019 Dolby Laboratories. ALL RIGHTS RESERVED.
Google, Google Play, and Chromecast Built-in are trademarks of Google LLC.
Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates.
Other names of companies, products, and services used in this User Manual may be trademarks, trade names or service marks of others and VIZIO, Inc. disclaims any interest in trademarks, trade names or service marks other than its own. Mention of non-VIZIO products is for informational purposes only.
App services featured on the included IR remote may vary and may not be available in all regions.

Product Recycling

The disposal and recycling of consumer electronic products may be regulated by your state. Always properly dispose of your VIZIO products in accordance with local laws and regulations. VIZIO supports the proper recycling of our products. For information on how to properly recycle your VIZIO products and to learn more about consumer electronics recycling laws, please go to
vizio.com/environment or call (800) 374-3473.

Packaging Disposal

VIZIO encourages the recycling of the packaging used for this product. Please break­down all boxes and recycle eligible materials according to local laws and regulations.
For more information please go to vizio.com/environment or call (800) 374-3473.
This User Manual may not be copied in whole or in part without the written permission of VIZIO, Inc. VIZIO, Inc. has made reasonable efforts to ensure the accuracy of the information provided herein. All product specifications, functionality, features, configurations, performance, design and other product information described herein are subject to change without notice. VIZIO, Inc. is not responsible for typographical, technical, or descriptive errors. To review the most updated version of this User Manual and the associated Quick Start Guide, go to
vizio.com.
VIZIO, the VIZIO logo, the V logo, VIZIO SmartCast, and other terms and phrases are trademarks or registered trademarks of VIZIO, Inc.
4K or HDR availability varies by app and may be subject to subscription fees, internet service, and device capabilities.
Battery Disposal Caution: This product may be shipped with batteries. Do not dispose
of batteries in a fire or with ordinary household waste. Batteries may explode and can cause damage. Replace batteries only with the same
or equivalent type of battery recommended by VIZIO. The disposal of batteries may be regulated by your state. For more information on recycling or properly disposing of your batteries, please check with your state or go to vizio.com/environment.
© 2022 VIZIO INC. All rights reserved. 220128
48
Loading...