Vixen XY User Manual

Instruction Manual for XY Dot Finder

Checking Contents
Thank you for your purchase of a Vixen XY Dot Finder. The XY Dot Finder features a
built-in fine adjustment mechanism for vertical and horizontal motion. The red dot light is
not a laser and it does not harm your eyes.

Make sure that your box contains the following parts.

- XY Dot Finder

- Low-profile Finder-base

- CR2032 battery

- Instruction manual

Parts Description

1 Brightness dial
2 Plastic frame
3 Vertical fine adjustment
4 Finder body
5 Alignment clamp screw (inside)
6 Alignment clamp
7 Lock screws
8 Sight line

9 Horizontal fine adjustment
10 Zero-power objective lens (inside)
11 Guidepost (inside)
12 Finder holding plate (underneath)
13 Finder bracket
14 Mounting block
15 Battery container cover

Attaching the XY Dot Finder to the telescope tube

1) Loosen the finder bracket fixing screw fully to allow insertion of the dovetail mounting
block of the XY Dot Finder unit.

2) Attach the XY Dot Finder to the telescope as shown in the figure 2, tighten the finder
bracket fixing screw securely (The mounting block is made of plastic and over tightening the
fixing screw may cause damage.).