Vivotek FD9365-HTV, FD9165-HT, FD9365-EHTV User Manual
FD9165-HT
Fixed Dome
FD9365-HTV/EHTV
Network Camera
User’s Manual
2MP 60fps • SNV II • WDR Pro II • Remote Focus • Smart Stream III • 50M IR
Smart IR II
Rev. 1.0
VIVOTEK
Table of Contents
Overview
Revision History ...............................................................................................................................................3
Read Before Use ..............................................................................................................................................4
Package Contents ............................................................................................................................................4
Symbols and Statements in this Document ......................................................................................................5
Physical Description ........................................................................................................................................5
Hardware Installation (FD9165) .......................................................................................................................9
Software Installation .......................................................................................................................................12
Hardware Installation (FD9365) .....................................................................................................................17
Software Installation .......................................................................................................................................23
Network Deployment ......................................................................................................................................33
Ready to Use ..................................................................................................................................................34
Accessing the Network Camera
Using Web Browsers ......................................................................................................................................37
Using RTSP Players .......................................................................................................................................40
Using 3GPP-compatible Mobile Devices ........................................................................................................41
Using VIVOTEK Recording Software .............................................................................................................42
Main Page
Client Settings
Conguration
System > General settings .............................................................................................................................54
System > Homepage layout ..........................................................................................................................56
System > Logs ...............................................................................................................................................59
System > Parameters ....................................................................................................................................61
System > Maintenance ...................................................................................................................................62
Media > Image .............................................................................................................................................66
Media > Video ................................................................................................................................................79
Media > Video ................................................................................................................................................80
Media > Audio.................................................................................................................................................89
Network > General settings ............................................................................................................................90
Network > Streaming protocols ....................................................................................................................97
Network > SNMP (Simple Network Management Protocol) .........................................................................107
Network > FTP .............................................................................................................................................108
Security > User accounts .............................................................................................................................109
Security > HTTPS (Hypertext Transfer Protocol over SSL) ............................................................... 111
Security > Access List ................................................................................................................................ 118
PTZ > PTZ settings ......................................................................................................................................123
Event > Event settings..................................................................................................................................127
Applications > Motion detection....................................................................................................................141
Applications > DI and DO ...........................................................................................................................144
Applications > Tampering detection .............................................................................................................145
Applications > Audio detection ...................................................................................................................146
Applications > PIR (FD9165) ........................................................................................................................148
Applications > Package management - a.k.a., VADP (VIVOTEK Application Development Platform) .......149
..............................................................................................................................................................
....................................................................................................................
.........................................................................................................................................................
..................................................................................................................................................
....................................................................................................................................................
3
37
43
48
53
2 - User's Manual
Recording > Recording settings .............................................................................................................. 152
Local storage > SD card management ..................................................................................................... 157
Local storage > Content management ..................................................................................................... 158
Appendix
URL Commands for the Network Camera ................................................................................................ 161
Technical Specications ...........................................................................................................................379
Technology License Notice ....................................................................................................................... 383
Electromagnetic Compatibility (EMC) .......................................................................................................384
....................................................................................................................................................
Overview
VIVOTEK
161
The FD9165-HT is the new fagship indoor dome network camera from VIVOTEK, equipped
with a full HD sensor capable of 1920x1080 resolution at 60 fps. With the most updated
VIVOTEK SNV and WDR Pro technology, the FD9165-HT is capable of capturing the
highest quality images in both low light and high contrast environments.
The FD9165-HT also offers the best in night time surveillance technology. By adopting
Smart IR II technology from VIVOTEK speed domes, the FD9165-HT IR illuminators now
align with the remote focus lens’ focus angle to provide the best IR image quality at any
lens setting. This feature optimizes IR intensity, reduces IR hotspots, and increases the IR
effective range up to 50 meters.
Additionally, the FD9165 and FD9365 series employs VIVOTEK’s Smart Stream III
technology and H.265 compression codec, reducing bandwidth more than 90%* while still
maintaining excellent image quality compared to traditional H.264 without smart streaming.
Furthermore, the VIVOTEK VADP (VIVOTEK Application Development Platform) allows
users to add customized programs for various applications and user scenarios. The
FD9165-HT also includes a PIR sensor as well as a built-in microphone, enabling further
detection of unexpected events.
* Depending on scenes
Protecting all these features is the FD9365’s IP66 and IK10 rated housing, capable of
operating from -50°C to 50°C (FD9365-EHTV).
Revision History
■ Rev. 1.0: Initial release.
User's Manual - 3
VIVOTEK
Read Before Use
The use of surveillance devices may be prohibited by law in your country. The Network Camera
is not only a high-performance web-ready camera but can also be part of a exible surveillance
system. It is the user’s responsibility to ensure that the operation of such devices is legal before
installing this unit for its intended use.
It is important to first verify that all contents received are complete according to the Package
Contents listed below. Take note of the warnings in the Quick Installation Guide before the Network
Camera is installed; then carefully read and follow the instructions in the Installation chapter to
avoid damage due to faulty assembly and installation. This also ensures the product is used
properly as intended.
The Network Camera is a network device and its use should be straightforward for those who
have basic networking knowledge. It is designed for various applications including video sharing,
general security/surveillance, etc. The Configuration chapter suggests ways to best utilize the
Network Camera and ensure proper operations. For creative and professional developers, the URL
Commands of the Network Camera section serves as a helpful reference to customizing existing
homepages or integrating with the current web server.
Package Contents
■ FD9165-HT, FD9365-HTV, FD9365-EHTV
■ L-wrench, desiccant bag (FD9365), screws.
■ Side routing conduit bracket (FD9365).
■ Quick Installation Guide & alignment sticker.
■ Waterproof connector for DI/DO (FD9365).
WARNING:
1. IR lights emit from ths product.
2. Use appropriate shielding or eye protection.
NOTE:
Use the camera only with a DC power supply that is UL listed, and limited power source
(LPS) certied. The power supply should bear the UL listed and LPS marks. The power
supply should also meet any safety and compliance requirements for the country of use.
4 - User's Manual
Symbols and Statements in this Document
i
INFORMATION: provides important messages or advices that might help prevent
inconvenient or problem situations.
NOTE: Notices provide guidance or advices that are related to the functional integrity of
the machine.
Tips: Tips are useful information that helps enhance or facilitae an installation, function,
or process.
WARNING: or IMPORTANT:: These statements indicate situations that can be
dangerous or hazardous to the machine or you.
Electrical Hazard: This statement appears when high voltage electrical hazards might
occur to an operator.
Physical Description
VIVOTEK
Outer View (FD9165)
Dome cover
Microphone
PIR sensor
User's Manual - 5
VIVOTEK
Inner View (FD9165)
Tilt retention screw
Terminal block
PIR sensor
Microphone
RJ45 Ethernet
socket
LEDs
IR LEDs
Lens
6 - User's Manual
Reset button MicroSD card slot
Outer View (FD9365)
Inner View (FD9365)
VIVOTEK
Microphone
Dome cover
Lens
Terminal block
Ethernet
Microphone
contects
IR LEDs
Tilt retention screw
RJ45 Ethernet socket
Waterproof connector for DI/DOWaterproof connector for
Status LEDs
Reset button
MicroSD card slot
User's Manual - 7
VIVOTEK
NOTE:
Some of the sufx syntax used in model naming are listed below:
E w/ heater for extreme weather
Fx Focal length w/ number
T w/ Remote focus lens
R w/ PoE repeater
H w/ High Dynamic Range functionality
V Vandal proof.
IMPORTANT:
802.3at
3
7
ON
100~240V
OFF
AC
LAN/PoE
1
10
9
658
GE LAN GE LAN
4
2
12/24V 1A or 2A
The FD9365-EHTV comes with an embedded heater and requires an 802.3at PoE
switch or 12V/24V 2A power.
Operating
Temperature
≥-10ºC,
FD9365-HTV,
FD8365-HTV-v2
≥-40ºC,
FD9365-EHTV
Consumption & Power Input
PoE: 11.9W; AC 24V: 10.5W; DC 12V: 9W.
PoE: 24.8W (PoE Plus mid-span or switch); AC 24V input: 21.8W;
DC 12V: 19.5W
8 - User's Manual
Hardware Installation (FD9165)
1. Jot down the camera's MAC address for later reference.
XXXXXX
0002D10766AD
2. Remove the dome cover by loosening 3 T10 screws.
VIVOTEK
User's Manual - 9
VIVOTEK
3. Plan your installation. Note the PIR sensor's coverage when selecting a installation
position.
121°
5M
77.3°
5M
4. Use the alignment sticker to drill mounting holes on the ceiling. Install the camera using
the included screws and anchors.
10 - User's Manual
VIVOTEK
5. Install an SD card to the socket. Refer to the pinouts table below if DI/DO, audio, and
external power are preferred.
# Name
1 AC24V
2 AC24V
3 DC12V IN4 DC12V IN+
1
2
3
4
5
6
7
8
9
10
11
12
13
14
10
64
GB
1
I
5 VIDEO OUT N
6 VIDEO OUT P
7 DI- (GND, also a common
GND for DO, MIC IN, &
AUDIO OUT)
8 DI1+
9 DI0+
10 DO111 DO012 DO+ (5V)
13 MIC IN P
14 AUDIO OUT P
6. Please visit VIVOTEK’s website to Install the "Shepherd” software utility. The program
will search for VIVOTEK Video Receivers, Video Servers or Network Cameras on the
same LAN.
Double-click on the camera’s MAC address to open a web console with the camera.
Shepherd
LAN
Browser
User's Manual - 11
VIVOTEK
Software Installation
7. Install the Shepherd utility, which helps you locate and congure your Network Camera
in the local network. If your camera comes without the CD, go to VIVOTEK’s website,
and locate the utility in the Downloads > Software page.
7-1. Run the Shepherd utility.
7-2. The program will conduct an analysis of your network environment.
12 - User's Manual
VIVOTEK
7-3. The program will search for all VIVOTEK network devices on the same LAN.
7-4. After a brief search, the installer window will prompt. Click on the MAC and model
name that matches the one printed on the product label. You can then double-click on
the address to open a management session with the Network Camera.
Network Camera
Model No: FD9165-HT
MAC:0002D1730202
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Pat. 6,930,709
R o HS
Made in Taiwan
FD9165-HT
IB8360-W 192.168.4.151 00-02-D1-73-02-02
0002D1730202
Forceful Password Conguration
8. The first time you log in to the camera, the firmware will prompt for a password
conguration for security concerns.
8-1. Since your camera is used for the rst time, there is no password. Enter “root” as the
user name, and nothting for the password.
User's Manual - 13
VIVOTEK
8-2. Enter the combination of alphabetic and numeric characters to fulfill the password
strength. requirement. The default name for the camera administrator is “root”, and can
not be changed.
Some, but not all special ASCII characters are supported: !, $, %, -, ., @, ^, _, and ~.
You can use them in the password combination.
8-3. Another prompt will request for the password you just congured. Enter the password
and then you can start congure your camera and see the live view.
14 - User's Manual
VIVOTEK
9. With a live view, adjust the camera's shooting direction by changing the pan, tilt, and
rotation angle.
1
2
350°
60°
10. Install the dome cover by fastening the T10 screws.
3
350°
User's Manual - 15
VIVOTEK
11. From a web console, open the firmware configuration page. Enter the Configuration >
Media > Image > Focus page. You will see a live stream on screen. If preferred, you
can zoom in on the scene. Use the “Perform Auto Focus” function to automatically tune
to a best image focus.
Conguration > Media > Image > Focus
1
2
16 - User's Manual
Hardware Installation (FD9365)
1. Jot down the camera's MAC address for later reference.
XXXXXX
0002D10766AD
2. Remove the dome cover using the included T10 wrench.
VIVOTEK
T10
User's Manual - 17
VIVOTEK
3. Remove the waterproof connectors. You can dispose of the foam pad from the I/O
connector cabling hole.
5~6.3mm
DI/DO: 1.8~2.1mm
4 Pass an Ethernet cable through the cabling hole as shown below.
18 - User's Manual
5. Wrap the rubber seal around the cable, and install the waterproof cable gland
components to the Ethernet cable. Leave a length of 15cm from the top of cable gland
assembly.
approx.
15cm
Ø 5 ~ 6.3mm
VIVOTEK
6. Use a crescent wrench to tighten the hex nut from top. Make sure the waterproof cable
gland is properly installed. Connect the Ethernet cable to the RJ45 socket.
User's Manual - 19
VIVOTEK
7. Pass the DI/DO, audio, and power wires through the waterproof cable gland components,
and through the rubber seal as shown below. Tighten the cable gland components using
a crescent wrench.
8. The pinouts are listed below. The DI/DO, audio, and power wires are user-supplied.
# Name
1 AC 24V
2 AC 24V
3 DC 12V IN4 DC 12V IN+
5 VIDEO-OUT N
6 VIDEO-OUT P
7 DI- (Common GND for all DI, DO, MIC-IN, and AUDIO-
OUT)
8 DI+ 1
9 DI+ 0
10 DO- 1 (If external devices are powered by external
sources, can use DI- as common ground)
11 DO- 0
12 DO+ (5V; if used, can be paired with DO- 0 and DO- 1.)
13 MIC-IN P
14 AUDIO-OUT P
20 - User's Manual
1
14
9. Install a MicroSD card if onboard storage is preferred.
VIVOTEK
10
64
GB
1
I
10. Use the alignment sticker to drill mounting holes on a ceiling or wall. If drilling a routing
hole is not allowed, you can use the side-routing bracket to route cables through a 3/4"
conduit from the side of the camera.
- OR -
User's Manual - 21
VIVOTEK
Note that the diameter of the hex lock nut of the conduit connector should not be larger
than 35mm.
3/4"
≤3/4”
Ø< 35mm
11. Install the camera to ceiling using the included screws. Pass the screw heads through
the keyhole slots, turn the camera counter-clockwise, and then fasten the screws.
22 - User's Manual
VIVOTEK
12. Please visit VIVOTEK’s website to Install the "Shepherd” software utility. The program
will search for VIVOTEK Video Receivers, Video Servers or Network Cameras on the
same LAN.
Double-click on the camera’s MAC address to open a web console with the camera.
Shepherd
LAN
Browser
Software Installation
13. Install the Shepherd utility, which helps you locate and congure your Network Camera
in the local network. If your camera comes without the CD, go to VIVOTEK’s website,
and locate the utility in the Downloads > Software page.
User's Manual - 23
VIVOTEK
13-1. Run the Shepherd utility.
13-2. The program will conduct an analysis of your network environment.
13-3. The program will search for all VIVOTEK network devices on the same LAN.
13-4. After a brief search, the installer window will prompt. Click on the MAC and model
name that matches the one printed on the product label. You can then double-click on
the address to open a management session with the Network Camera.
Network Camera
Model No: FD9165-HT
MAC:0002D1730202
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Pat. 6,930,709
R o HS
Made in Taiwan
FD9165-HT
IB8360-W 192.168.4.151 00-02-D1-73-02-02
0002D1730202
24 - User's Manual
VIVOTEK
Forceful Password Conguration
14. The first time you log in to the camera, the firmware will prompt for a password
conguration for security concerns.
14-1. Since your camera is used for the rst time, there is no password. Enter “root” as the
user name, and nothting for the password.
14-2. Enter the combination of alphabetic and numeric characters to fulll the password
strength. requirement. The default name for the camera administrator is “root”, and can
not be changed.
User's Manual - 25
VIVOTEK
Some, but not all special ASCII characters are supported: !, $, %, -, ., @, ^, _, and ~.
You can use them in the password combination.
14-3. Another prompt will request for the password you just congured. Enter the password
and then you can start congure your camera and see the live view.
26 - User's Manual
15. According to the live view, adjust the shooting direction.
353°
0°~ 60°
VIVOTEK
16. When done, tighten the tilt retention screws.
User's Manual - 27
VIVOTEK
17. Replace the desiccant bags on the inside of the dome cover.
1
2
18. Install the dome cover using the T10 wrench.
28 - User's Manual
VIVOTEK
19. From a web console, open the firmware configuration page. Enter the Configuration >
Media > Image > Focus page. You will see a live stream on screen. If preferred, you
can zoom in on the scene. Use the “Perform Auto Focus” function to automatically tune
to a best image focus. Check the live view to ensure the image is in focus.
Conguration > Media > Image > Focus
NOTE:
The "T" models comes with motorized focus
lens.
1
2
Please do not loosen the other 6 antitamper screws on the top of the dome
cover. They are used to hold the dome
cover components in place.
User's Manual - 29
VIVOTEK
DI/DO Diagram
1. The DO+ pin provides a 5V output, and the max. load is 50mA.
2. The max. voltage for DO- pins is 30VDC (External power).
In order to control AC devices, the following diagram can be taken into consideration.
This diagram uses a relay to control the ON/OFF condition of the AC device.
3. An external relay can be triggered by using the DO+ or by an external power source,
depending on the type of relay you use.
4. In case of using an individual relay (instead of using a relay module), for protection
against voltage or current spikes, a transient voltage suppression diode must be
connected in parallel with the inductive load.
Dry contact with external DC power source to supply a relay. Dry contact is the safest connecon
to protect devices.
DI-
PE
DO+
DI+
DO-
DC 0V
Switch
NO
Photo
Coupler
NC
Relay
External DC power
DC
DC 0V
External Device
External AC power
with Protected Earth
AC
PE
30 - User's Manual
Loading...