Vivotek FD816C-HF2, FE8182 User Manual
User’s Manual
FD816C-HF2
Recess Mount
Network Camera
Recess Mount • WDR • PoE • 3DNR • Smart Stream
Fixed or Fisheye Lens • Pixel Calculator
FE8182
Rev. 1.0
VIVOTEK
2 - User's Manual
Table of Contents
Overview...................................................................................................................................................................... 4
Revision History ..................................................................................................................................................... 4
Read Before Use .................................................................................................................................................... 5
Package Contents .................................................................................................................................................. 5
Symbols and Statements in this Document ............................................................................................................ 5
Introduction ............................................................................................................................................................. 6
Hardware Installation .............................................................................................................................................. 7
Network Deployment ................................................................................................................................................. 11
Setting up the Network Camera over the Internet ................................................................................................ 11
Software Installation ............................................................................................................................................. 14
Ready to Use ........................................................................................................................................................ 15
Accessing the Network Camera ................................................................................................................................ 16
Using Web Browsers ............................................................................................................................................ 16
Using RTSP Players ............................................................................................................................................. 19
Using 3GPP-compatible Mobile Devices .............................................................................................................. 20
Using VIVOTEK Recording Software ................................................................................................................... 21
Main Page ................................................................................................................................................................. 22
Client Settings ........................................................................................................................................................... 33
H.264 Media Options ................................................................................................................................................ 33
H.264 Protocol Options ............................................................................................................................................ 33
MP4 Saving Options ................................................................................................................................................. 34
Local streaming buffer time ...................................................................................................................................... 34
Conguration ............................................................................................................................................................. 37
System > General settings ................................................................................................................................... 38
System > Homepage layout ................................................................................................................................ 39
System > Logs ..................................................................................................................................................... 42
System > Parameters .......................................................................................................................................... 43
System > Maintenance ......................................................................................................................................... 44
Media > Image ................................................................................................................................................... 48
General settings ...................................................................................................................................................... 48
Image settings .......................................................................................................................................................... 50
Exposure
................................................................................................................................................................
52
Privacy mask ......................................................................................................................................................... 54
Pixel Calculator (Currently available on FE8182) ................................................................................................... 55
Media > Video ...................................................................................................................................................... 57
Stream settings
.....................................................................................................................................................
57
Media > Audio....................................................................................................................................................... 64
Audio Settings .......................................................................................................................................................... 64
Network > General settings .................................................................................................................................. 65
Network > Streaming protocols .......................................................................................................................... 72
Network > QoS (Quality of Service) .................................................................................................................. 80
VIVOTEK
User's Manual - 3
Network > SNMP (Simple Network Management Protocol)
........................................................82
Security > User Account ....................................................................................................................................... 83
Security > HTTPS (Hypertext Transfer Protocol over SSL) .......................................................................84
Security > Access List ........................................................................................................................................ 91
Security > IEEE 802.1x .................................................................................................................................... 94
PTZ > PTZ settings ............................................................................................................................................. 96
Digital PTZ Operation (E-PTZ Operation) ................................................................................................................ 96
Event > Event settings ......................................................................................................................................... 99
Event ....................................................................................................................................................................... 99
Add server .............................................................................................................................................................. 104
Add media .............................................................................................................................................................. 108
Applications > Motion detection.......................................................................................................................... 114
Applications > Tampering detection ................................................................................................................... 117
Applications > Audio detection ......................................................................................................................... 118
Applications > Package management - a.k.a., VADP (VIVOTEK Application Development Platform) ............. 120
Recording > Recording settings ........................................................................................................................ 123
Local storage > SD card management ............................................................................................................... 128
Local storage > Content management ............................................................................................................... 129
Appendix ................................................................................................................................................................. 132
URL Commands for the Network Camera .......................................................................................................... 132
1. Overview ............................................................................................................................................................. 132
2. Style Convention ................................................................................................................................................ 132
Technical Specications ..................................................................................................................................... 277
Technology License Notice ................................................................................................................................. 279
Electromagnetic Compatibility (EMC) ................................................................................................................. 280
VIVOTEK
4 - User's Manual
Overview
The VIVOTEK FD816C-HF2 is a recessed-mount xed dome network camera offering up to 30
fps at 2-Megapixel resolution with superb image quality, even in the darkest hours of the night.
Due to its compact size, the camera is able to blend into any surroundings such as banks, retail
stores, restaurants, ofces and more.
Featuring the improved Wide Dynamic Range Technology, WDR Pro, the FD816C-HF2 provides
superior visibility in high-contrast lighting environments with a 2-shutter capture method,and with
SNV technology, it makes high-quality full-color surveillance video possible under low-light conditions. At the other end of the spectrum, 3D Noise Reduction Technology allows users to enjoy
an increased level of image detail in extremely dark environments without the waste on bandwidth.
To dramatically reduce le sizes and conserve valuable network bandwidth, the FD816C-HF2
supports industry-standard H.264 compression technology. Combined with the ST7501 multilingual 32-channel recording software, users can quickly and easily set up an IP surveillance
system that’s simple to operate but hard to beat.
VIVOTEK’s FE8182 is a Compact-Design, Recessed-mount sheye camera, featuring a detailed
5-Megapixel resolution sensor with superb image quality. A small camera with large functionality,
VIVOTEK’s FE8182, with a diameter of only 60 mm, is truly an all-in-one surveillance solution
that meets a wide variety of needs for indoor surveillance. Equipped with a sheye lens for 180°
panoramic view (wall mount) or 360° surround view without blind spots (ceiling/oor mount), the
camera is able to provide full video coverage of wide, open areas, such as airport lobbies, shop-
ping malls, retail stores, ofces and more.
The FE8182 provides various display layouts, including original surround view, panoramic view,
and regional view to suit a variety of applications. In addition, in both the panoramic and regional
viewing modes, users can utilize the ultra-smooth ePTZ function to effortlessly zoom in and
focus on a region of interest (ROI). Further, a new cutting-edge pixel calculation function helps
users to ensure high image quality for a designated area.
At the darker end of the spectrum, 3D Noise Reduction Technology allows users to enjoy an
increased level of image detail in extremely dim environments without consuming or wasting
unreasonably high bandwidth. To dramatically reduce le sizes and conserve valuable network
bandwidth, the FE8182 supports Smart Stream and industry-standard H.264 compression
technology. Further, the recessed-mount design allows users to install the camera without the
need for screws. The FE8182 is not just perfect for blending into any surroundings or any roof
space, but also produces substantial savings on both cost and time.
Revision History
Rev. 1.0: Initial release.
VIVOTEK
User's Manual - 5
Read Before Use
The use of surveillance devices may be prohibited by law in your country. The Network Camera is not
only a high-performance web-ready camera but can also be part of a exible surveillance system. It is
the user’s responsibility to ensure that the operation of such devices is legal before installing this unit for
its intended use.
It is important to rst verify that all contents received are complete according to the Package Contents
listed below. Take note of the warnings in the Quick Installation Guide before the Network Camera is
installed; then carefully read and follow the instructions in the Installation chapter to avoid damage due to
faulty assembly and installation. This also ensures the product is used properly as intended.
The Network Camera is a network device and its use should be straightforward for those who have basic
networking knowledge. It is designed for various applications including video sharing, general security/
surveillance, etc. The Configuration chapter suggests ways to best utilize the Network Camera and
ensure proper operations. For creative and professional developers, the URL Commands of the Network
Camera section serves as a helpful reference to customizing existing homepages or integrating with the
current web server.
Package Contents
Symbols and Statements in this Document
i
INFORMATION: provides important messages or advices that might help prevent inconvenient
or problem situations.
NOTE: Notices provide guidance or advices that are related to the functional integrity of the
machine.
Tips: Tips are useful information that helps enhance or facilitae an installation, function, or
process.
WARNING: or IMPORTANT:: These statements indicate situations that can be dangerous or
hazardous to the machine or you.
Electrical Hazard: This statement appears when high voltage electrical hazards might occur
to an operator.
■ FD816C-HF2 or FE8182 camera
■ Alignment Stickers
■ Screws and anchors
■ Quick Installation Guide
■ Software CD
VIVOTEK
6 - User's Manual
Introduction
The cameras come with different lens modules. A sheye lens can be used to cover an entire
space, while a xed focal lens a specic eld of view.
Fisheye lens module
Fixed focal lens module
Fisheye
Fixed focal
VIVOTEK
User's Manual - 7
Hardware Installation
2. Drill a hole on ceiling or wall. The diameters for the installations with or without the
retention tube are different.
Use the M3 self tapping screws if installed without the retention tube. Note that this type of
installation does not apply to hard surfaces, such as a concrete wall.
Network Camera
Model No: XXXXXX
MAC: 0002D1083236
Pat. 6,930,709
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Made in Taiwan
1
1. Jot down the camera’s MAC address for later reference. This is important if you have
multiple cameras at one installation site.
50mm
45mm
2
w/ the retention tube
w/o the retention tube
VIVOTEK
8 - User's Manual
4. Pull the retention clips to the back of the camera, and then insert the camera into the wall.
3-1. Detach the top cover.
3-2. Route an Ethernet cable through the pre-drill hole and then connect it to the camera. The
camera can only be powered through the PoE connection. If preferred, install a MicroSD
card.
1
2
M
icro
SD
3
4
VIVOTEK
User's Manual - 9
5. The retention clips will hold the module in place.
6. Note that the shooting angle of a xed lens can only be vertically adjusted. This mark should
be on top. There is no need to change the shooting angle for the sheye lens model.
5
6
6-1. Use a small-size Phillips screwdriver to change the shooting angle of a xed focal lens.
6-2. Attach the top cover to camera by aligning the notch. The magnets will hold the cover in
place.
VIVOTEK
10 - User's Manual
Item LED Status Description
1 Steady Red Power on and system booting
Red LED off Powered off
2 Steady Red + blinking Green every 1 sec. (Green
LED on for 1 sec and off for another)
Network heartbeat
Steady Red + Green LED off Network disconnected
3 Blinking Red every 0.15 sec. + Blinking Green
every 1 sec. (Red LED on for 0.15 sec. and Green
LED on for 1 sec. and off for another)
Upgrading rmware
4 Blinking Red every 0.15 sec. + blinking Green
every 0.15 sec
Restoring defaults
Hardware Reset
The reset button is used to reset the system or restore the factory default settings. Sometimes
resetting the system can return the camera to normal operation. If the system problems remain
after reset, press the reset button longer to restore the factory settings and install again.
Reset: Press and release the recessed reset button with a straightened paper clip. Wait for the
Network Camera to reboot.
Restore: Press and hold the recessed reset button for at least several seconds to restore. Note
that all settings will be restored to factory defaults.
SD/SDHC/SDXC Card Capacity
This network camera is compliant with SD/SDHC/SDXC 32GB, 64GB, and other preceding
standard SD cards.
LED
Reset button
LED Denition
VIVOTEK
User's Manual - 11
Network Deployment
Setting up the Network Camera over the Internet
There are several ways to set up the Network Camera over the Internet. The rst way is to set
up the Network Camera behind a router. The second way is to utilize a static IP. The third way is
to use PPPoE.
Internet connection via a router
Before enabling the access to the Network Camera over the Internet, make sure you have a
router and follow the steps below.
1. Connect your Network Camera behind a router, the Internet environment is illustrated below.
Regarding how to obtain your IP address, please refer to Software Installation on page 14 for
details.
2. In this case, if the Local Area Network (LAN) IP address of your Network Camera is
192.168.0.3, please forward the following ports for the Network Camera on the router.
■ Secondary HTTP port: 8080
■ RTSP port: 554
■ RTP port for audio: 5558
■ RTCP port for audio: 5559
■ RTP port for video: 5556
■ RTCP port for video: 5557
If you have changed the port numbers on the Network page, please open the ports
accordingly on your router. For information on how to forward ports on the router, please refer
to your router’s user’s manual.
3. Find out the public IP address of your router provided by your ISP (Internet Service Provider).
Use the public IP and the secondary HTTP port to access the Network Camera from the
Internet. Please refer to Network Type on page 65 for details.
IP address : 192.168.0.3
Subnet mask : 255.255.255.0
Default router : 192.168.0.1
IP address : 192.168.0.2
Subnet mask : 255.255.255.0
Default router : 192.168.0.1
LAN (Local Area Network)
Router IP address : 192.168.0.1
WAN (Wide Area Network )
Router IP address : from ISP
Cable or DSL Modem
POWER
COLLISION
LINK
RECEIVE
PARTITION
1
2
3
4
5
Internet
VIVOTEK
12 - User's Manual
For example, your router and IP settings may look like this:
Device IP Address: internal
port
IP Address: External Port (Mapped port on the
router)
Public IP of router 122.146.57.120
LAN IP of router 192.168.2.1
Camera 1 192.168.2.10:80 122.146.57.120:8000
Camera 2 192.168.2.11:80 122.146.57.120:8001
... ... ...
Congure the router, virtual server or rewall, so that the router can forward any data coming
into a precongured port number to a network camera on the private network, and allow data
from the camera to be transmitted to the outside of the network over the same path.
From Forward to
122.146.57.120:8000 192.168.2.10:80
122.146.57.120:8001 192.168.2.11:80
... ...
When properly congured, you can access a camera behind the router using the HTTP request
as follows: http://122.146.57.120:8000
If you change the port numbers on the Network configuration page, please open the ports
accordingly on your router. For example, you can open a management session with your router
to congure access through the router to the camera within your local network. Please consult
your network administrator for router conguration if you have troubles with the conguration.
For more information with network configuration options (such as that of streaming ports),
please refer to Configuration > Network Settings. VIVOTEK also provides the automatic port
forwarding feature as an NAT traversal function with the precondition that your router must
support the UPnP port forwarding feature.
VIVOTEK
User's Manual - 13
Internet connection with static IP
Choose this connection type if you are required to use a static IP for the Network Camera.
Please refer to LAN conguration on page 65 for details.
Internet connection via PPPoE (Point-to-Point over Ethernet)
Choose this connection type if you are connected to the Internet via a DSL Line. Please refer to
PPPoE on page 85 for details.
Set up the Network Camera through Power over Ethernet (PoE)
When using a PoE-enabled switch
The Network Camera is PoE-compliant, allowing transmission of power and data via a single
Ethernet cable. Follow the below illustration to connect the Network Camera to a PoE-enabled
switch via an Ethernet cable.
When using a non-PoE switch
If your switch/router does not support PoE, use a PoE power injector (optional) to connect
between the Network Camera and a non-PoE switch.
PoE Switch
Power + Data Transmission
NOTE:
1. The camera is only to be connected to PoE networks
without routing to outside plants.
2. For PoE connection, use only UL listed I.T.E. with PoE
output.
POW
ER
C
O
LL
I
S
ION
L
I
N
K
RECEIVE
PARTITIO
N
1
2
3
4
5
POW
ER
C
O
LL
I
S
ION
L
I
N
K
RECEIVE
PARTITIO
N
1
2
3
4
5
Non-PoE Switch
PoE Power Injector
(optional)
VIVOTEK
14 - User's Manual
Software Installation
Installation Wizard 2 (IW2), free-bundled software included on the product CD, helps you set up
your Network Camera on the LAN.
1. Install IW2 under the Software Utility directory from the software CD.
Double click the IW2 shortcut on your desktop to launch the program.
2. The program will conduct an analysis of your network environment.
After your network environment is analyzed, please click Next to continue the program.
3. The program will search for all VIVOTEK network devices on the same LAN.
4. After a brief search, the main installer window will pop up. Double-click on the MAC address
that matches the one printed on the camera label or the S/N number on the package box label
to open a browser management session with the Network Camera.
Installation
Wizard 2
IW
2
Network Camera
Model No: FE8182
MAC: 0002D1083236
Pat. 6,930,709
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Made in Taiwan
0002D1083236
00-02-D1-08-32-36 192.168.5.109 FE8182
VIVOTEK
User's Manual - 15
Ready to Use
1. A browser session with the Network Camera should prompt as shown below.
2. You should be able to see live video from your camera. You may also install the 32-channel
recording software from the software CD in a deployment consisting of multiple cameras. For
its installation details, please refer to its related documents.
NOTE:
If you encounter problems with displaying live view or the onscreen plug-in control, you may try
to remove the plug-ins that might have been installed on your computer. Remove the following
folder: C:\Program Files (x86)\Camera Stream Controller\.
VIVOTEK
16 - User's Manual
Accessing the Network Camera
This chapter explains how to access the Network Camera through web browsers, RTSP players,
3GPP-compatible mobile devices, and VIVOTEK recording software.
Using Web Browsers
Use Installation Wizard 2 (IW2) to access to the Network Cameras on the LAN.
If your network environment is not a LAN, follow these steps to access the Netwotk Camera:
1. Launch your web browser (e.g., Microsoft
®
Internet Explorer, Mozilla Firefox, or Netscape).
2. Enter the IP address of the Network Camera in the address eld. Press Enter.
3. The live video will be displayed in your web browser.
4. If it is the rst time installing the VIVOTEK network camera, an information bar will prompt as
shown below. Follow the instructions to install the required plug-in on your computer.
•
Currently the Network Camera utilizes 32-bit ActiveX plugin. You CAN NOT open a
management/view session with the camera using a 64-bit IE browser.
•
If you encounter this problem, try execute the Iexplore.exe program from C:\Windows\
SysWOW64. A 32-bit version of IE browser will be installed.
•
On Windows 7, the 32-bit explorer browser can be accessed from here: C:\Program Files
(x86)\Internet Explorer\iexplore.exe
IMPORTANT:
VIVOTEK
User's Manual - 17
NOTE:
For Mozilla Firefox users, your browser will use QuickTime to stream live video. If you do not
have QuickTime on your computer, please download QuickTime from Apple Inc's website, and
then launch your web browser.
• The onscreen Java control can malfunction under the following situations:
A PC connects to different cameras that are using the same IP address (or the same camera
running different rmware versions). Removing your browser cookies will solve this problem.
• In the event of plug-in compatibility issues, you may try to uninstall the plug-in that was previ-
ously installed.
Tips:
VIVOTEK
18 - User's Manual
To enable the ActiveX® Controls for your browser:
2-3. Refresh your web browser, then install the ActiveX
®
control. Follow the instructions to
complete installation.
2-1. Choose Tools > Internet Options >
Security > Custom Level.
2-2. Look for Download signed ActiveX®
controls; select Enable or Prompt. Click OK.
NOTE:
1. By default, your Network Camera is not password-protected. To prevent unauthorized access,
it is highly recommended to congure a password for your camera later.
For more information
about how to enable password protection, please refer to Security on page 83.
2. If you see a dialogue box indicating that your security settings prohibit running ActiveX
Controls®, please enable ActiveX Controls for your browser.
VIVOTEK
User's Manual - 19
Using RTSP Players
To view the H.264 streaming media using RTSP players, you can use one of the following
players that support RTSP streaming.
Quick Time Player
VLC Player
As most ISPs and players only allow RTSP streaming through port number 554, please set the
RTSP port to 554. For more information, please refer to RTSP Streaming on page 73.
For example:
4. The live video will be displayed in your player. For more information on how to congure the
RTSP access name, please refer to RTSP Streaming on page 73 for details.
The RTSP players will show the original circular-shape image. You can access the Regional
views via the ST7501 or VAST software. See page 74 for an example.
1. Launch the RTSP player.
2. Choose File > Open URL. A URL dialog box will prompt.
3. The address format is rtsp://<ip address>:<rtsp port>/<RTSP streaming access name for
stream1 to stream4>
rtsp://192.168.5.151:554/live.sdp
Video 16:38:01 2011/03/25
VIVOTEK
20 - User's Manual
Using 3GPP-compatible Mobile Devices
To view the streaming media through 3GPP-compatible mobile devices, make sure the Network
Camera can be accessed over the Internet. For more information on how to set up the Network
Camera over the Internet, please refer to Setup the Network Camera over the Internet on page
11.
To utilize this feature, please check the following settings on your Network Camera:
1. Because most players on 3GPP mobile phones do not support RTSP authentication, make
sure the authentication mode of RTSP streaming is set to disable.
For more information, please refer to RTSP Streaming on page 73.
2. As the the bandwidth on 3G networks is limited, you will not be able to use a large video size.
Please set the video and audio streaming parameters as listed below.
For more information, please refer to Stream settings on page 57.
Video Mode MPEG-4
Frame size 176 x 144
Maximum frame rate 5 fps
Intra frame period 1S
Video quality (Constant bit rate) 40kbps
Audio type (GSM-AMR) 12.2kbps
3. As most ISPs and players only allow RTSP streaming through port number 554, please set
the RTSP port to 554. For more information, please refer to RTSP Streaming on page 73.
4. Launch the player on the 3GPP-compatible mobile devices (e.g., Real Player).
5. Type the following URL commands in the URL eld.
The address format is rtsp://<public ip address of your camera>:<rtsp port>/<RTSP streaming
access name for stream 3>.
For example:
rtsp://192.168.5.151:554/live.sdp
VIVOTEK
User's Manual - 21
Using VIVOTEK Recording Software
The product software CD also contains recording software, allowing simultaneous monitoring
and video recording for multiple Network Cameras. Please install the recording software; then
launch the program to add the Network Camera to the Channel list. For detailed information
about how to use the recording software, please refer to the user’s manual of the software or
download it from http://www.vivotek.com.
VIVOTEK
22 - User's Manual
Main Page
This chapter explains the screen elements on the main page. It is composed of the following
sections: VIVOTEK INC. Logo, Host Name, Camera Control Area, Conguration Area, and Live
Video Window.
Host name
Resize Buttons
VIVOTEK logo
Configuration
Area
Live View window
Camera Control
Panel
VIVOTEK INC. Logo
Click this logo to visit the VIVOTEK website.
Host Name
The host name can be customized to t your needs. For more information, please refer to System > General
Settings on page 38.
VIVOTEK
User's Manual - 23
Display mode:
(This menu only displays with FE8182)
This is a configuration menu exclusively designed for Fisheye lens. Due to the fisheye lens’ wide
coverage of 180º hemispheric and 360º panoramic views and to manipulate the details within, the
following display modes are provided:
1O - One Original sheye view.
1P - One Panoramic view
1R - One Regional view
1P2R - One Panoramic and two Regional views (Wall mount)
2P - Two Panoramic views
1P3R - One Panoramic and three Regional views (Wall mount)
1O3R - One Original and three Regional views
4R - Four Regional views
4R PRO - Four Regional views interactively displayed when the eld
of view changes in any of the views
1O8R - One Original and eight Regional views
* Most display modes are available in the Ceiling mount type.
* See following discussions for detailed explanation of these modes. If
selected, the Wall mount type provides another two distinctive modes.
Skip this section if you use the FD816C-HF2 in your conguration.
NOTE:
VIVOTEK
24 - User's Manual
1O (Original) Display mode:
When mounted on a ceiling, the sheye camera can
cover an approximately 50 m² of surveillance area (hung
at a height of approximately 3 meters), while still keeping
details in videos with recognizable facial features of
people trafcking through the area.
The 1O view is especially adequate for taking an overview glimpse of surveillance area with a ceiling mount
camera.
1O View (Original View)
180° Hemispheric
Swipe to scroll horizontally
1P (Single Panoramic) Display mode:
With image correction algorithms, the hemispheric image is transformed into a rectilinear stripe in the 1P
display mode. Viewers can use the PTZ panel or simply use mouse control to quickly move through the
360º panoramic view. (Mouse control on the Panoramic view is available with the Ceiling mount type.)
Note that the 1P view is apt for an overview, the Zoom in/Zoom out function does not apply in this mode.
VIVOTEK
User's Manual - 25
1R (Single Regional) Display mode:
The 1R mode provides access to one image section within the hemisphere. You can zoom in or out
(using the mouse wheel or PTZ panel) or travel to other areas in the hemisphere using mouse clicks and
swipes. A single click on a particular object can bring the object to the center of your view window. Click
and hold down the left mouse button, and you can swipe the view both horizontally and vertically.
1R View (Single Regional View)
Zoom in/Zoom out
&
all-directional
navigation control
Zoom In
Zoom Out
Hold down the button
and move to a preferred direction.
2P (Dual Panoramic View) Display mode:
Similar to 1P, the 2P display mode provides simultaneous access to both the left and right sections of a
hemisphere. Both panoramic views are corrected into a more viewable dewarped image. Viewers can
use a mouse click and swipe to quickly scroll horizontally through the surveillance area.
* Note that the dividing line falls approximately on the center of the VIVOTEK logo.
2P View (Panoramic View)
Right hemi
Left hemi
Converted to rectilinear view (Dewarp)
VIVOTEK
26 - User's Manual
1O3R (One Original & Three Regional) Display mode:
The 1O3R mode provides access to multiple live view sections within the hemisphere and the reference
to their relative positions on an Original circular view. The FOV indicators (#1 ~ #3) interact with your
current operation as you may zoom in/out or move the live view window to a different place.
You can zoom in or out or travel to other areas within the hemisphere using identical methods as
previously described in the 1R mode.
You can also change the locations of Regional views by dragging the FOV indicators on the "Original"
circular view.
1O3R (Original & Regional) Mode Screen Control
Current screen selection
Zoom In
Zoom Out
1
2
3
Interactive
regional FOV indicators
Click to bring into
center of view
Pan or tilt
O
R
R
R
Tips:
In a Regional view displaying 100% of video feed (via the Resize buttons - see page 29), your
mouse wheel can be used to scroll the view window vertically before you click on a live image.
After you click on the live image, the mouse wheel becomes the zoom in/zoom out tool.
VIVOTEK
User's Manual - 27
1O8R (One Original and Eight Regional) Display mode:
The view control and look and feel are identical to that as described in the 1O3R mode.
Note that if you change the position of a view in hemisphere, e.g., #3 window, you may lose the
conguration change by switching to another display mode. The live view window does not automatically
save your view section layout.
123
4
5
6
7
8
1
2
3
4
5
6
7
8
O
RRR
RRR
RR
4R (Four Regional) Display mode:
The view control and look and feel are identical to that as described in the 1O3R mode except the
absence of the Original circular view.
4R PRO (Four Regional Proactive) Display mode:
The 4R PRO mode is similar to the 4R mode except that the quad view windows consecutively rotate in
correspondence to the change of view area in one window. Note that zoom in/out and tilt control is not
available in this mode.
1P2R (One Panoramic and Two Regional) Display mode:
1P3R (One Panoramic and Three Regional) Display mode:
These two modes are only available with the Wall Mount type! The Mount type conguration is found in
Conguration > Media > Image > General Settings. Please refer to page 48 for details.
The view control in these two modes is identical to that as described in the 1O3R mode.
VIVOTEK
28 - User's Manual
Video Stream: This Network Camera supports multiple streams (channel # and stream #1 ~ #3)
simultaneously. You can select any one of them for live viewing. For more information about multiple
streams, please refer to page 57 for detailed information.
Manual Trigger: Click to manually enable or disable an event trigger. Please congure an event setting
before enabling this function. A total of 3 or 4 event settings can be congured. For more information
about event setting, please refer to page 99. If you want to hide this item on the homepage, please go
to the System > Homepage Layout > General settings > Customized button to deselect the “show
manual trigger button” checkbox.
Digital Output: Click to turn the digital output device on or off.
PTZ Control Panel:
Pano.: Click this button to start the automated circular rotation through a regional view (360° continuous
rotation). Note that this function does not apply in a Panoramic view because a Panoramic view already
shows the full coverage.
Stop: Click this button to stop the Auto Pano and Auto Rotate functions.
Pan /Tilt /Zoom /Panoramic speed: Adjust the speed of these controls when exerted:
Conguration Area
Client Settings: Click this button to access the client setting page. For more information, please refer to
Client Settings on page 33.
Conguration: Click this button to access more of the conguration options provided with the Network
Camera. It is suggested that a password is applied to the Network Camera so that only the administrator
can configure the Network Camera. For more information, please refer to the description for the
Conguration menus on page 37.
Left
Down
Zoom Out
Start to Auto Pano
Stop Auto Pano
Return to Home Position
Right
Up
Zoom In
Rotate
The following apply to both FD816C and FE8182.
VIVOTEK
User's Manual - 29
Language: Click this button to choose a language for the user interface. Language options are available
in: English, Deutsch, Español, Français, Italiano,
日本語
, Português,
簡体中文
, and
繁體中文
. You can
also change a language on the Conguration page; please refer to page 37.
Hide Button
You can click the hide button to hide the control panel or display the control panel.
Resize Buttons
:
Click the Auto button, the video cell will resize automatically to t the monitor.
Click 100% is to display the original homepage size.
Click 50% is to resize the homepage to 50% of its original size.
Click 25% is to resize the homepage to 25% of its original size.
■ The following window is displayed when the video mode is set to MJPEG:
Live Video Window
■ The following window is displayed when the video mode is set to H.264:
Video Title: The video title can be congured. For more information, please refer to Video settings on
page 57.
H.264 Protocol and Media Options: The transmission protocol (TCP or UDP, etc.)and media options for
H.264 video streaming. For further conguration, please refer to Client Settings on page 33.
Time: Display the current time. For further conguration, please refer to Media > Image > Genral settings
on page 48.
Title and Time: The video title and time can be stamped on the streaming video. For further conguration,
please refer to Media > Image > Genral settings on page 48.
Video and Audio Control Buttons: Depending on the Network Camera model and Network Camera
conguration, some buttons may not be available.
Title and Time
Time
Video and Audio Control Buttons
Video (TPC-AV)
H.264 Protocol and Media Options
Video Title
Video 13:59:05 2015/07/04
Video 13:59:05 2015/07/04
VIVOTEK
30 - User's Manual
Snapshot: Click this button to capture and save still images. The captured images will be displayed
in a pop-up window. Right-click the image and choose Save Picture As to save it in JPEG (*.jpg) or BMP
(*.bmp) format.
Pause: Pause the transmission of the streaming media. The button becomes the Resume button
after clicking the Pause button.
Stop: Stop the transmission of the streaming media. Click the Resume button to continue
transmission.
Start MP4 Recording: Click this button to record video clips in MP4 file format to your computer.
Press the
Stop MP4 Recording button to end recording. When you exit the web browser, video
recording stops accordingly. To specify the storage destination and le name, please refer to MP4 Saving
Options on page 34 for details.
Volume: When the Mute function is not activated, move the slider bar to adjust the volume on the
local computer.
Mute: Turn off the volume on the local computer. The button becomes the Audio On button after
clicking the Mute button.
Full Screen: Click this button to switch to full screen mode. Press the “Esc” key to switch back to normal
mode.
Loading...