Vivotek AM-11C_V01 Installation Guide

VIVOTEK Bullet Series

J-Mount Bracket

Installation Guide

Using AM-11C J-mount bracket

Rev. 1.0

Accessory ordering part no.: 900029400G_ V01

Part no.: 625032000G

IP Surveillance

Revision History:

* Rev. 1.0: Initial Release

AM-11C Dimensions and weight

400 x 222.2 x 90mm, 1.2KG

Compatible VIVOTEK Cameras

IP8355H, IP8355EH, IP8365H, IP8365EH, IP8371, IP8371E, IB8373-EH, IP8372, IB8381, IB8381-E

You may also refer to VIVOTEK's website for the list of supported models. Support for other models can be available through time.

Package Contents: AM-11C, Installation Guide, screw pack, 1x hex wrench.

Installation

1. Use the mounting holes on the bracket to mark the drill positions on ceiling. Drill screw holes and a routing hole on ceiling. Hammer the anchors into the ceiling and install the bracket using the included hex head screws and washers.

2. Prepare an Ethernet CAT5e cable and strip part of the cable sheath. Pass the cable through the

bracket using a pull string

3. Fasten an intersection bracket to the side of camera. Use the included cable gland to make sure the

Ethernet connection is waterproof. Pass the cable through the waterproof components, and use a crimping tool to attach to an RJ45 connector.

When done, connect the RJ45 connector and tighten up the waterproof cable gland.

English

o: white/orange stripe O: orange solid g: white/green stripe B: blue solid b: white/blue stripe G: green solid br: white/brown stripe

BR: brown solid

3 4

B b

5 6

+ 5 hidden pages