Vivotek AE-131, AE-132 Installation Guide
VIVOTEK Pan/Tilt & Fixed Dome Series
Outdoor Enclosure
Using
AE-131/-132 Outdoor Enclosure,
AE-151 Outdoor Enclosure,
AM-114 Pendant Head (outdoor),
AM-116 and AM-117 Pendant Pipes,
AM-221 Gooseneck,
AM-212 Wall-mount bracket,
AM-311 Pole Mount,
AM-411 Corner Mount,
AM-711 Junction Box.
Installation Guide
Rev. 1.0
IP Surveillance
Revison History:
Rev. 1.0: Initial release.
AE-131 and AE-132 Outdoor Enclosure Package Contents
AE-151 Outdoor Enclosure Package Contents
1. Enclosure.
2. Dome cover.
3. Power supply with cable.
4. Cross-shape bracket.
5. Copper stand-offs and
screws.
1. Enclosure.
2. Screws.
2
Compatible VIVOTEK Cameras
1
English
AE-131
AE-132
AE-151 FD7141, FD7141V, FD8361,
PZ7135, PZ7151, PZ71X1, PZ7131, PZ81X1,
PZ71X2, PZ7132, PT7135, PT7137, PT8133
FD8361L
3
Warning:
1. Select a suitable location where the camera is free from accidental damage, tampering,
or harsh environmental conditions.
2. Locate a place for the installation where the camera can not be intentionally or
unintentionally interfered.
3. Select a solid and at mounting surface that can support the combined weight of the
camera and associated hardware. Vibration and temperature ranage should also be
taken into consideration.
Compatible Accessories
2
Compatible Accessories (1-1): AM-221 Gooseneck Bracket
Compatible Accessories (1-2): AM-212
Wall-mount Bracket
Compatible Accessories (2): AM-311 Pole Mount
Bracket
Compatible Accessories (3): AM-411 Corner Mount Bracket
4
Compatible Accessories (4): AM-711 Junction Box
Compatible Accessories (5-1): AM-114 Pendant Head
Compatible Accessories (5-2): AM-116 and AM-117 Pendant Pipe
English
5
Mounting & Cabling with Outdoor Enclosures
3
3-1. Installing Camera to Enclosure - AE-131/-132
Below is a general, sample procedure using an outdoor enclosure:
1. Feed power lines and other cables through a gooseneck bracket, a pendant head, or a
pendant pipe.
2. Insert and connect power cables and connect the DC 12V output to camera as shown
below. Also route an Ethernet cable through the opening in the center.
DC 12V output to camera
DC 12V input for power
6
Loading...