Vivo MOUNT-HP03 Instruction Manual

Mounting VESA Adapter

Scan the QR code with your mobile device or follow the link

for helpful videos and specications related to this product.

Instruction Manual

https://vivo-us.com/products/mount-hp03

[e-mail] www.vivo-us.com 1-800-371-5654

SKU: MOUNT-HP03

2 3

ASSEMBLY STEPS

STEP 1

Place monitor face down on a so,
nonabrasive surface. Press and hold the

release button while carefully detaching the

base from the monitor.

STEP 2

Align the adapter bracket (A) to the monitor. Insert the bracket into the monitor until it locks in place,
then insert the M4x12 bolt (D) and M4 washer (C) through the top of the bracket and into the hole in

the monitor. Tighten securely.

STEP 3

Connect the VESA plate to the adapter
bracket (A) using thumb bolts (B).

PACKAGE CONTENTS

TOOLS NEEDED

WARNING!

Phillips

Screwdriver

A (x1)

Adapter Bracket

B (x4)

M4x12 Thum b Bolt

If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualied technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specied in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.

C (x1)

M4 Washer

D (x1)

M4x12

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.