Vivo DESK-V000R Instruction Manual

36.4” x 29.4” Sit-Stand Desktop Workstation

Instruction Manual

SKU: DESK-V000R

Scan the QR code with your mobile device or follow the link

for helpful videos and specications related to this product.

https://vivo-us.com/products/desk-v000r

[e-mail] www.vivo-us.com 1-800-371-5654

WARNING!

If you do not understand these directions, or if you have any doubts about the safety of the

installation, please call a qualied technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specied in this manual and do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or

inappropriate use.

PACKAGE CONTENTS

STEP 3

Squeeze the handle on the right side, then raise or lower desktop to desired height.

STEP 4

Place monitor, keyboard, and other items on
the desktop surface.

STEP 5

Manage cables using cable ties (B).

A (x1)

Adjustable

Desktop

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

ASSEMBLY STEPS

STEP 1

Carefully remove the desktop (A) from
packaging and place on a at surface. Attach

foot pads (C) to the underside of frame.

B (x2)

Cable Tie

33 lbs

(14.97kg)

C (x6)

Foot Pad

STEP 2

Remove the strap from desktop (A) and the

packing material.

Through the

power line

From the back side of the desk, rotate

caps counterclockwise to the le to
open the threading hole

Remove

CAUTION!

B

Keep monitor and

laptop base fully on

the desktop.

Follow the cable

routing instructions to

avoid the potential to

pinch cables.

Leave enough slack

in cable to allow for

full range of vertical

motion (15” / 38 cm).

Raise desktop
slowly to keep

items stable.

Failure to follow these instructions may result in property damage and/or personal injury.

2 3