Vivo DESK-TOP1B Instruction Manual

62.5" x 31.5" Three Section Table Top

Instruction Manual

SKU: DESK-TOP1B

Scan the QR code with your mobile device or follow the link

for helpful videos and specications related to this product.

https://vivo-us.com/products/desk-top1b

[e-mail] www.vivo-us.com 1-800-371-5654

WARNING!

If you do not understand these directions, or if you have any doubts about the safety of the

installation, please call a qualied technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specied in this manual and do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or

inappropriate use.

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

PACKAGE CONTENTS

TOOLS NEEDED

A (x2)

Support Bar

B (x1)

Desktop Section

C (x24)
M5x12

ASSEMBLY STEPS

STEP 1

Place and align desktop section (B) upside down
on protective surface. Assemble support bars (A)

to desktop using 12 screws (C).

Mounting to an Electric Height Adjustable Desk Base

STEP 3a

Place electric height adjustable desk frame upside
down on the desktop. Adjust frame width to match
desktop mounting holes, and secure frame to
desktop using 8 screws (C).

STEP 2 (Electric Desk Only)

Mount cable management tray with support

brackets from desk frame to rear support
bar (A) using the thumbscrews from the tray
support brackets.

Phillips

Screwdriver

2