Pink Electric Commercial Cotton Candy Machine
Instruction Manual
SKU: CANDY-V002
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/candy-v002
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com www.vivo-us.com 309-278-5303
Chat live with an agent!
WARNING: IMPORTANT SAFETY INFORMATION
READ AND FOLLOW ALL SAFETY REQUIREMENTS
KEEP THIS MANUAL IN A SAFE AND DRY PLACE FOR FUTURE REFERENCE
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualified technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage
or injury caused by improper mounting, incorrect assembly or inappropriate use.
• ENSURE THAT SERVICING IS DONE BY PROFESSIONAL SERVICE PERSONNEL, IF APPLICABLE, TO
MINIMIZE PRODUCT DAMAGE OR SAFETY ISSUES.
• ALL MINORS MUST BE SUPERVISED WHILE MACHINE IS IN OPERATION.
• THIS APPLIANCE IS NOT INTENDED FOR USE BY PERSONS (INCLUDING CHILDREN) WHOSE
PHYSICAL, SENSORY OR MENTAL CAPABILITIES MAY BE DIFFERENT OR REDUCED, OR WHO LACK
EXPERIENCE OR KNOWLEDGE, UNLESS SUCH PERSONS RECEIVE SUPERVISION OR TRAINING TO
OPERATE THE APPLIANCE BY A PERSON RESPONSIBLE FOR THEIR SAFETY.
• PLUG THE MACHINE INTO AN ELECTRICAL OUTLET WITH A GROUND LINE.
WARNING: DO NOT USE IF THE CABLE, ELECTRICAL OUTLET OR PLUG IS BROKEN.
WARNING: TO AVOID ELECTRIC SHOCK, DO NOT TOUCH THE PLUG OR ELECTRIC CABLE IF THEY ARE
WET. KEEP THE CABLE AWAY FROM HEAT. DON’T IMMERSE THE CABLE, ELECTRICAL PLUG OR THE
MACHINE INTO WATER OR OTHER LIQUIDS.
WARNING: DO NOT USE DETERGENT WHEN CLEANING. ANY REMAINING DETERGENT RESIDUE WILL
POLLUTE THE CANDY FLOSS. DO NOT LET MACHINE SOAK IN WATER, AS THIS WILL DAMAGE THE
ELECTRICAL COMPONENTS.
CAUTION: FOLLOW INSTRUCTIONS TO PREVENT BURNS.
• DO NOT TOUCH THE SURFACE OF THE HEATING HEAD WHILE THE MACHINE IS ON.
• DO NOT PLACE HAND INTO THE PAN TO REMOVE THE SUGAR WHILE THE MACHINE IS ON.
• DO NOT MOVE THE MACHINE WHILE IT IS ON.
• ALLOW THE MACHINE TO COOL BEFORE MOVING IT OR REMOVING EXCESS SUGAR.
ELECTRICAL DATA
2
MODEL CANDY-V002
DIMENSION 930 x 520 x 860mm
HEATING POWER 1000 W
MOTOR POWER 80 W
ELECTRIC VOLTAGE 110 V
FREQUENCY 60 Hz
YIELD 1 PER 30 SEC
FUSE 15A 250V (F15)
PACKAGE CONTENTS
PRODUCT SPECIFICATIONS
A1 (x2)
Wheel
A6 (x2)
M12 x70 Screw
B2 (x1)
Handle Pipe
B7 (x1)
Candy Machine
A2 (x1)
Wheel Leg
A7 (x2)
Washer
B3 (x8)
M4x12 Screw
B8 (x4)
M5 Nuts
A3 (x2)
Leg
A8 (x1)
Socket Wrench
B4 (x8)
M5x8 Screw
B9 (x4)
M5x10 Screw
A4 (x3)
Beam
A9 x2)
Wheel Cover
B5 (x1)
Cone Shelf
B10 (x1)
Pan
A5 (x6)
M5x30 Screw
B1 (x2)
Handle Block
B6 (x1)
Shelf
PREPARATION
• Aer carefully removing the machine from the packing carton, clean the heating head and the
stainless steel pan with warm, soapy water (do NOT use detergent type cleaners). When the head is
turned on, it will clear the water from the machine. Make sure to dry the pan completely.
• The cotton candy machine should be placed on a dry, flat stable surface.
• Make sure all parts are properly installed before plugging in the machine.
NOTE: Due to the operation testings of the machine prior to shipping, some sugar residue may be
remaining.
3