Vivitek WM-3Z, LT30B-G Installation Manual
Installation Manual
Model: WM-3Z and LT30B-G
It is imperative that the installation instructions within this manual are followed for
·
safety reasons. Vivitek Corporation is not responsible for damages resulting from
incorrectly installed mounts or projectors on to the mount.
·
Sufficient expertise is required for installing this projector wall mount.
·
Do not use the projector wall mount for purposes other than for which it is designed.
··
Please contact Vivitek at 1-855-885-2378 with any questions pertaining to the correct
installation of this projector mount.
46101 FREMONT BLVD, FREMONT, CA. 94538 - TEL 855.885.2378 - EMAIL: - WWW.VIVITEKUSA.COMPROAV@VIVITEKCORP.COM
Important Safety
2
3
4
5
7
8
9
*
Checking The Supplied Accessories
Fixed Support Arm X 1
Projector Mounting
L2
Wall Plate X 1
Plate X 1
Wall Cover X 1
Wall Plate Cover X 1
Wal l plate
diagrammatic
NO
presentation
A
B
C
D
E
F
G
Wal l plate mus t be aligned to center of s creen
designation
Screw
(M6X55)
Φ10mm Anchor bolt
L5 Allen key
L3 Allen key
Screw
(
M4X10)
Screw
(M6X12)
M4 connecting
screw
quantity
5
5
1
1
4
4
4
Pg.2
L1
V-Offs et
Project ion screen
Top of image
V-Offs et
Project ion screen
Bottom of
mountin g plate
Checking The Installation Position
108 0P(1 920 x108 0)
1080p (DH765Z-UST & DH768Z-UST)
Projection image size Installation distance
Diagonal(D)
inch (cm)
80" (203)
105" (267)
125" (318)
150" (381)
Note: 1080p Vertical Offset (V-Offset) can be calculated for different screen sizes beside the four
above. The formula is; V-Offset= [screen width/2 (0.29)]
Width x Height
inch (cm)
70"x 39" (177 x 99)
92" x 52" (232 x 130)
109" x 61" (277 x 156)
131" x 74" (332 x 187)
Vertical Offset
(V-Offset)
inch (cm)
11.1" (28.2)
13.4" (34)
15.2" (38.6)
17.5" (44.5)
WXGA (DH763Z-UST)
Projection image size Installation distance
Diagonal(D)
inch (cm)
80" (203)
105" (267)
125" (318)
150" (381)
Width x Height
inch (cm)
68"x 42" (172 x 108)
89" x 57" (226 x 141)
106" x 66" (269 x 168)
128" x 80" (323 x 202)
Vertical Offset
(V-Offset)
inch (cm)
10.0" (25.5)
12.0" (30.5)
13.6" (34.6)
15.6" (39.6)
L1 (From Screen surface to
the rear of the projector)
inch (cm)
1.63" (4.14)
6.87" (17.5)
11.06" (28.1)
16.30" (41.4)
L1 (From Screen surface to
the rear of the projector)
inch (cm)
1.63" (4.14)
6.87" (17.5)
11.06" (28.1)
16.3" (41.4)
L2 (From Screen surface to
the rear of the projector)
16.98" (43.13)
22.22" (56.44)
26.42" (67.11)
31.65" (80.39)
L2 (From Screen surface to
the rear of the projector)
16.98" (43.13)
22.22" (56.44)
26.42" (67.11)
31.65" (80.39)
Note: WXGA Vertical Offset (V-Offset) can be calculated for different screen sizes beside the four
above. The formula is; V-Offset= [screen width/2 (0.27)]
To Set The Projector Wall Mount On The Wall
Pg.3
Loading...