Vitesse VS-710 User Manual [ru]
NOU S VIV ONS SAIN
We l iv e h ea lth y
Решетка для
êpyïíoй рубки
Решетка для
средней рубки
Решетка для
мелкой рубки
MEAT GRINDER
МЯСОРУБКА
Ручка для удобного
перемещения
“Vitesse France S.A.R.L” (Витессе, Франция)
91 Руе Де Фоборг Сант Хонор, Париж 75008, Франция
Сделано в Китае
www.vitesse.ru
Насадка
для колбасок
VS-710
Dear Customer! You have made an excellent decision.
ViTESSE home range offers you an exclusive, high quality range of
appliances for your ultimate home luxury and healthy living.
Thanks for using our product. This kind of meat grinder is excellent in design and
made out high quality components. We are sure that our devices will become
faithful and assistance in your housekeeping. Please spare few minutes to go
through this manual carefully before using this products in order to enjoy
maximum pleasure of this products.
SCHEME OF THE UNIT
А Motor housing
В Duster protect
С Head
D Plate
Е Food Pusher
F Feed screw
G Cutting blade
Н1 & Н2 Plates (big / medium / fine)
J Fixing ring
К Sausage attachment
I1 ~ I5 Plates
www.vitesse.ru
INSTRUCTION MANUAL
SAFETY AND PRECAUTIONS
Before the first connecting of the appliance check that voltage indicated on the
rating label corresponds to the mains voltage in your home.
For home use only. Do not use for industrial purposes. Do not use the
appliance for any other purposes than described in this instruction manual.
Do not use outdoors.
Do not disassemble the appliance when it is plugged to the power supply.
Always unplug the appliance from the power supply before cleaning and when
not in use.
To prevent risk of electric shock and fire, do not immerse the appliance in
water or in any other liquids. If it was happened, unplug it immediately and
check in service center.
Close supervision is necessary when it is used near children.
Do not leave the appliance switched on when not in use.
Do not use other attachments than those supplied.
Do not operate after malfunction or cord damage.
Do not attempt to repair, adjust or replace parts in the appliance. Check and
repair the malfunctioning appliance in the nearest service center only.
Keep the cord away from sharp edges and hot surfaces.
Do not pull, twist, or wrap the power cord around appliance.
Do not place the appliance near gas or electric oven or store at heated
surface.
Avoid contacting with moving parts.
The blades are very sharp, so handle them with care.
Do not push products into the appliance by fingers while it is in operation. If
food becomes lodged in feeder tube, use pusher to push it down.
If this doesn't work, turn the motor off, unplug unit, and then disassemble
appliance to remove remaining food.
·When carrying the unit be sure to hold the motor housing with both hands. Do
not carry the unit by the hopper plate or head.
Do not fix the cutting blade and cutting plate when using KUBBE attachment.
Do not grind hard food such as bones, nuts, ginger or other products with hard
fiber.
When the circuit breaker activates, do not switch on.
Do not run meat grinder continuously for longer than 15-20 minutes. Turn off
switch and let it rest for at least 10 minutes to cool down the motor, otherwise
the motor may be damaged.
Be sure to turn switch off appliance after each use. Make sure the motor stops
completely before disassembling.
Do not overload appliance with a products.
P/1 P/2
www.vitesse.ru
INSTRUCTION FOR USING
BEFORE THE FIRST USING
1. Wash all parts (except body) in warm soapy water.
2. Before plugging in, ensure the appliance is switched off.
3. Before plugging in, ensure the “ON/OFF” switch is turned to “OFF” position.
Similarly, ensure the “ON/OFF” switch is turned to “O” position.
ASSEMBLING
Locate the unit on a firm place. The air passage should be kept free and not
blocked.
Place the feed screw into the head; long end first, by turning the feed screw tightly
until it is set into the motor housing.
Place the cutting blade onto the feed screw shaft with the blade facing the front as
illustrated. If it is not fitted properly, meat will not be ground.
MINCING MEAT
1. Cut all foods into pieces so that they pass easily into the hopper opening.
2. Plug in and turn the “On/OFF” switch to “ON” position.
3. Feed foods onto the hopper plate. To feed it use the food pusher only (Fig.7).
4. After use switch the unit off and unplug it from the power supply.
REVERSE FUNCTION
In case of jamming switch off the appliance and switch reverse knob.
Snake will be rotating in the opposite direction, and the head will get empty.
If it doesn't work, switch off the unit and clean it.
MAKING SAUSAGE
Notices: Mince mutton once or twice.
Fry onion until brown and add minced mutton, all spice, salt and flour.
Mince meat three times and mix all ingredients together in a bowl. More meat and
less flour for outlet cover create better consistency and taste.
1. Grind the mixture three times.
2. Disassemble by reversing the steps from 5-3 to remove the cutting plate and
cutting blade.
3. Place attachments A and B onto the feed screw shaft together, fitting
protrusions in the slots
4. Screw fixing ring into place until tight. Do not over tighten
5. Make the cylindrical outlet cover
6. Form kubbe as illustrated below and deep fry.
Place the desired cutting plate next to the cutting blade, fitting protrusions in the
slots.
Support or press the centre of the cutting plate with one finger then screw the
fixing ring until tight with another hand. Do not over tighten
P/4P/3
Loading...