Vitek VTC-TNT3RFEB, VTC-TNT3RFE, VTC-TNT3RFE-2, VT-TNT3CKTFE, VT-TNT3CKTFE-2 Quick Start Guide

VTC-TNT3RFE

Megapixel Indoor/Outdoor WDR

Transcendent Series 3

IP Turret Camera with 2 High

Power IR LED Illumination

VITEK

QUICK START GUIDE

VITEK

FEATURES

• 1/3” 3.0 Megapixel CMOS Image Sensor

• Up to 30fps live view @ 3 MegaPixel (2048x1536)

• 2.8mm or 3.6mm Fixed Iris Lens Options

• 2 High Power Infrared LED’s with 65’ IR Range

• Digital Wide Dynamic Range (D-WDR)

• True Mechanical Day/Night function by ICR

• 3D-DNR Noise Reduction

• On Board Motion Detection, Privacy Masking, and ROI

• H.264 & MJPEG Compression

• Remote Viewing via CMS, Internet Explorer, and iOS & Android
Apps

• ONVIF Compliant

• IP66 Weather Resistance

• Optional Junction Box Mount Available (VT-TJB01)

• 12VDC & PoE (Power over Ethernet) Operation

PLEASE NOTE:

Complete User Guide, Software, Tools, and Updates are
available online. Scan the QR Code or visit:
http://www.vitekcctv.com/Downloads

Components and Accessories

Camera

Quick Guide

Screws

Hex Wrench

Overview

1

Focus

Zoom

Drill Template

Rubber Plug

Waterproof Cap

2

3

2

Lens

RJ-45 Ethernet

3

Power Input1

2 3

Network Cable & Power Connections

First connect the Waterproof Cap to an Ethernet patch cable, then
connect the cameras ethernet adaptor. If not powering the camera with
PoE, also connect the power Cable to an approved 12VDC Power
Supply.

Network Cable

12VDC

Optional 12VDC

Power Connection.

Not needed with PoE

Weather Resistant Network Coupler

1. Loosen the nut from the Weather Resistant Network Coupler,

2. Run ethernet cable through coupler, then attach a RJ-45 connector.

3. Tighten the nut and coupler for a weather resistant seal.

3