Vitek VTD-MD2-4I, VTD-MD2-4CH User Manual

VTD-MD2-4

2.1 Megapixel 4-in-1 HDA

Angled Mini Dome Cameras

VITEK

FEATURES:

• 1/2.8” Sony STARVIS CMOS Sensor

• HD-TVI / AHD / CVI / CVBS Video Output

• Advanced Starlight Technology Offers Dramatically Higher
Sensitivity to Light Producing Color Images in Very Dark &
Night Scenes

• 3.0mm Lens Included

• Included tilted surface mount allows for more versatile camera
angle

• Digital Wide Dynamic Range (D-WDR)

• 3D-DNR - Three Dimensional Motion Adaptive Noise Reduction

• External OSD Joystick Controller

• Advanced OSD Functions: BLC/HLC, D-WDR, Motion detection,
Privacy mask, Flip, DeFog

• CoC (Control Over COAX)

• Over 1500’ HD Video Transmission (Depending on cable
characteristics and integrity)

• Can be Semi-Flush or Surface Mounted

• Available in Ivory (VTD-MD2-4I) or Chrome (VTD-MD2-4CH)

• 12VDC Operation

• 3 Year Warranty

INSTALLATION / SETUP

INCLUDED IN THE BOX:

1) Mini Dome Camera

2) Mounting Base

INSTALLATION:

3) Wall Mount & Camera Mount Screws

4) L-Wrench.

1) Attach the surface mount bracket to

the wall or ceiling with the included
screws.

2) Attach the camera to the surface

mount bracket with the included
screw.

3) Attach the dome cover to the camera

by turning clockwise.

4) Secure the dome cover to the camera

with the Included L-Wrench.

5) Connect 12VDC Power & Video

Cables.

SELECT MODE WITH ON-CABLE OSD JOYSTICK:

CVBS Mode: Push joysick LEFT for 5 seconds

AHD Mode: Push joysick RIGHT for 5 seconds

CVI Mode: Push joysick UP 5 seconds

TVI Mode: Push joysick DOWN for 5 seconds

1