Vitek VTD-MD2-4 User Manual
VITEK
VTD-MD2-4
2.1 Megapixel 4-in-1 HDA
Angled Mini Dome Cameras
FEATURES:
• 1/2.8” Sony STARVIS CMOS Sensor
• HD-TVI / AHD / CVI / CVBS Video Output
• Advanced Starlight Technology Offers Dramatically Higher
Sensitivity to Light Producing Color Images in Very Dark &
Night Scenes
• 3.0mm Lens Included
• Included tilted surface mount allows for more versatile camera
angle
• Digital Wide Dynamic Range (D-WDR)
• 3D-DNR - Three Dimensional Motion Adaptive Noise Reduction
• External OSD Joystick Controller
• Advanced OSD Functions: BLC/HLC, D-WDR, Motion detection,
Privacy mask, Flip, DeFog
• CoC (Control Over COAX)
• Over 1500’ HD Video Transmission (Depending on cable
characteristics and integrity)
• Can be Semi-Flush or Surface Mounted
• Available in Ivory (VTD-MD2-4I) or Chrome (VTD-MD2-4CH)
• 12VDC Operation
• 3 Year Warranty
1
INSTALLATION / SETUP
1) Attach the surface mount bracket to
the wall or ceiling with the included
screws.
2) Attach the camera to the surface
mount bracket with the included
screw.
3) Attach the dome cover to the camera
by turning clockwise.
4) Secure the dome cover to the camera
with the Included L-Wrench.
5) Connect 12VDC Power & Video
Cables.
INSTALLATION:
INCLUDED IN THE BOX:
1) Mini Dome Camera
2) Mounting Base
3) Wall Mount & Camera Mount Screws
4) L-Wrench.
SELECT MODE WITH ON-CABLE OSD JOYSTICK:
CVBS Mode: Push joysick LEFT for 5 seconds
AHD Mode: Push joysick RIGHT for 5 seconds
CVI Mode: Push joysick UP 5 seconds
TVI Mode: Push joysick DOWN for 5 seconds
Loading...