Vitek VTD-HOCRAZ39, VTD-HOCRAZ922 User Manual

VITEK

FEATURES:

• 1/2.9” Sony® CMOS

VTC-HOCRAZ39/922

2.1MP HD-SDI Compact Indoor/Outdoor WDR True Day/Night Dome Camera

• 2.1 MegaPixel With full 1080p/720p HD-SDI Output (SMPTE 292M)

• MegaPixel IR Corrected 3-9mm (VTC-HOCRAZ39) /9-22mm (VTC-HOCRAZ922) Varifocal Lens

• Mechanical IR Cut Filter (True Day/Night)

• 16:9 Video format

• On-board Intelligence (OBI Technology) delivers Auto-Focus-Zoom by tracking motion, then optically zooming in to that area of the frame

• Fully programmable advanced WDR

• Two (2) High Power 850nm IR LEDs with up to 80’ foot range

• Integrated Cooling Fan

• Advanced OSD Functions: Motion Activated Pointing Zoom, Defog, Dynamic IR, BLC/HLC, Motion Deblur, Pixel Defect Compensation, Title Set, Mirror, Flip

• 100% Pure Digital Transmission of video data

• Up to 700’ HD Transmission Range (Depending on cable characteristics and integrity)

• Heavy Duty IP68 rated weather/vandal resistant aluminum construction

• 12VDC / 24VAC Dual Voltage Operation

Safety Precaution

To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent electric shocks and risk of fire hazards, do NOT use other than specific power source.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons .

The symbol is intended to alert the user to the presence of important operating and maintenance(servicing) instructions in the literature accompanying the unit.

Warning :

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment . This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Caution : Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Mains power quality should be that of a typical commercial environment. If the user of the model requires continued operation during power mains interruptions, it is recommended that the model be powered from an uninterruptible power supply (UPS) or a battery.

Safety Precaution

NOTICE

The image used in this instruction manual are processed to help comprehension

and may differ from actual video of the camera.

Avoid installing in areas where shock or vibration may occur.

Pay attention to safety when installing the connection cable and observe that the

cable is not subjected to heavy leads, kinks or damage and no moisture can get in. Never open the device such as boards or lens. The warranty becomes void if repairs are undertaken by unauthorized persons. Maintenance and repair have to be carried out only by authorized service centers. Use only a mild detergent to clean the housing. The camera should never be operated beyond the technical specifications.

This can lead to damage to the camera and void the warranty. The camera should never be operated in water.

Optional Dome Mounts to Suit any Application!

Contents

p. 02 - 03

Safety Precaution

Optional Dome Mounts

p. 04

Contents

p. 05 - 06

Features

p. 02- 03

Package Includes

p. 07

Dimensions

p. 09

Part Names

p. 09 - 11

Installation Instructions

p. 12 - 25

Operating Instructions

p. 26

Specifications

p. 28

Warranty

Features

Key Features

¥ Full HD, 2Mega Pixel HD-SDI CAMERA, 1920x1080(30p/25p)

¥ True WDR(Wide Dynamic Range)

Improved Noise reduction with the enhanced 3D-NR

¥ VTD-HOCRAZ39: f=3~9mm, F1.2~F2.1 Day&Night zoom lens (Optical 3x Auto focus zoom / Digital 32x zoom)

VTD-HOCRAZ922: f=9~22mm, F1.6~F2.3 Day&Night zoom lens (Optical 2.4x Auto focus zoom / Digital 32x zoom)

¥ Focusing Status Indicator on Screen

- ★(Blue) Focusing in process

- ★(White) Focusing Completed

Dual Filter Switching

M.A.P. - Motion Activated Pointing Zoom which enables the flexible zooming at any area.

¥ Smart Motion Zoom in combining with Pointing Zoom.

Selectable Scale down image to 720p mode

¥ Motion Detect, Privacy Mask, Defog, Sens-up(x32), BLC/HLC, HV Flip,

D-Zoom(1.1x~8x), LSC(Lens Shade Compensation), Motion Deblur

Pixel Compensation

¥ ID / TITLE / ZOOM RATIO DISPLAY

Enhanced light Sensitivity by DSS technology

¥ Top performance at low light sensitivity (Sens-up On)

¥ OSD menu & Video sub-out for easy installation & maintenance.

¥ Circuit protection against faulty connection in power polarity

¥ Isolated power supply against ground loop problem

¥ Remote control via RS-485 (Pelco-D/P)

¥ 2 High power LEDs

¥ Flush / Surface mount selectable

¥ Hard Coated Polycarbonate Clear bubble dome

¥ Built-in 3-Axis Gimbal

¥ Built-in cooling Fan & Heating function

¥ IP68 / IK10 Protection

Features

General Description

This camera realizes the natural and crisp image as you see the scene in front of you by adopting Auto Focus Full HD(1920x1080p) camera module.

• With ICR mechanism,

- Enhances its sensitivity about 10x at night time

- Can Accept Infared light

• 24VAC/12VDC dual power design,

- Offers the ﬂexibility of Installation

- Ensures the reliability

Package Includes

HD-SDI Dome Camera

Complete Installation and Operation Instructions on CD

Plastic Anchor:

6 x 30mm (4pcs)

Mounting Screw: 4 x 30mm (4pcs)

General Operation Instructions

Video Sub-Out Cable (1pc)

Torque Wrench: 3mm (1pc)

Mounting Template

Dimensions

(unit: inches)

5.5

3.9

3.2

4.7

See Optional Dome Mounts

(pg. 3)

3-0.17

4.0

5.5

PCD 4.7

4.7

2.7

1.5

Part Names

CONDUIT SPACER

(Option)

POWER AND VIDEO CABLE

SURFACE MOUNT (Option)

FLUSH MOUNT

3-AXIS GIMBAL

ZOOM LENS

SAFTY WIRE

DOME COVER

CONDUIT HOLE CAP

(Option)

OSD CONTROL

JOY STICK

BUBBLE DOME

Installation Instructions

1. Locate the mounting template at the installation position and drill the ceiling or wall if needed.

2. Open the dome cover by loosening screws(4x12mm). Use the torque wrench supplied.

A. Flush mount type:

See Optional Dome Mounts (pg. 3)

- Place the dome base unit on pre-drilled position and attach using mounting screws (4x30mm).

- Route the Power cable to the connecting place.

B. Surface mount type (Option):

See Optional Dome Mounts (pg. 3)

- Place the surface mount on pre-drilled position and attach using mounting screws (4x30mm). Assemble the cable conduit, otherwise tighten a conduit hole cap.

- Route the Power cable to the connecting place.

- Afﬁx the dome base unit to the surface mount using the assembly screws (4x14mm). Before attaching the dome base make sure the assembly holes are aligned with the surface mount assembly holes.

4. Set the cameras viewing angle.

5. Replace the dome cover to the dome base unit and tighten the assembly screws.

Flush mount type

Flush Mount Installation

requires a Flush Mount Decorator Plate

requires a Flush Mount

(See pg. 3)

Decorator Plate (See pg. 3)

Flush Mount Decorator Plate

Mounting Screw

(4x30mm)

Surface mount type

Torque Wrench

Assembly Screw

(4x12mm)

Assembly Screw

(4x14mm)

+ 19 hidden pages