VITEK
• 1000 TV Lines of Resolution (1.39 MegaPixel)
• 1/2.9” Sony® CMOS Sensor
• Highly Advanced EN773E Digital Signal
Processor
• 2.8-12mm Varifocal Lens Included
• Available with 35 IR LEDs (120’ Range)
• Advanced OSD Functions: WDR, 3D DNR,
DSS, DIS, Sens-up, Motion Detection, Privacy
• Secondary Video Output (Cable Included)
• 3-Axis Mount for Optimum Viewing Angle
• IP68 Waterproof Rated
• 12VDC/24VAC Dual Voltage Operation
Alpha Mega Series
Vandal Resistant
Dome Cameras
black
Table of ConTenTs
BOX CONTENTS / MOUNTING ACCESSORIES 2-3
AVAILABLE MODELS 3
VTD-A2812/VM INSTALLATION 4
VTD-AR2812/VM INSTALLATION 5
INSTALLATION TIPS 6
OSD OPERATION 7-18
DIMENSIONS 19
SPECIFICATIONS 20-21
NOTES 22
1
1) Alpha Mega Dome Camera
BOX CONTENTS
1) Dome Camera
2) Mounting Accessories
3) This instruction Manual & Mounting Template
AVAILABLE MODELS / ACCESSORIES
VTD-AV4F/IB / VTD-AV4F/IW
620TVL Vandal Color Dome Camera with Fixed Lens.
VTD-AV2812/IB / VTD-AV2812/IW
BOX CONTENTS
Self Tapping Screws
For attaching the housing base to a solid surface.
Type #: Phillips ST4x30
Qty: 4
BOX CONTENTS
1) Dome Camera
2) Mounting Accessories
3) This instruction Manual & Mounting Template
VTD-AV4F/IB / VTD-AV4F/IW
620TVL Vandal Color Dome Camera with Fixed Lens.
VTD-AV2812/IB / VTD-AV2812/IW
620TVL Indoor Color Dome Camera with 2.8~12mm DC Auto Iris Lens.
VTD-AVR2812/IB / VT-AVR2812/IW
BOX CONTENTS
Self Tapping Screws
For attaching the housing base to a solid surface.
Type #: Phillips ST4x30
Qty: 4
Secondary Video Output Cable
To be used with a service monitor for adjusting
the angle, focus and zoom.
Qty: 1
BOX CONTENTS
1) Dome Camera
2) Mounting Accessories
3) This instruction Manual & Mounting Template
VTD-AV4F/IB / VTD-AV4F/IW
620TVL Vandal Color Dome Camera with Fixed Lens.
VTD-AV2812/IB / VTD-AV2812/IW
620TVL Indoor Color Dome Camera with 2.8~12mm DC Auto Iris Lens.
VTD-AVR2812/IB / VT-AVR2812/IW
620TVL Indoor Color Dome Camera with 2.8~12mm DC Auto Iris, IR
Corrected Lens & 35 IR LEDs.
BOX CONTENTS
Self Tapping Screws
For attaching the housing base to a solid surface.
Type #: Phillips ST4x30
Qty: 4
Secondary Video Output Cable
To be used with a service monitor for adjusting
the angle, focus and zoom.
Qty: 1
Torx Wrench
Type #: T20
Length: 63mm / Diameter: 4mm
Qty: 1
2) Mounting Accessories
3) Secondary Video Output Cable
4) This instruction Manual & Mounting Template
MoUnTInG aCCessoRIes
Self Tapping Screws
For attaching the housing base to a solid surface.
Type #: Phillips ST4x30
Qty: 4
Secondary Video Output Cable
To be used with a service monitor for adjusting
the angle, focus and zoom.
Qty: 1
Torx Wrench
Type #: T20
Length: 63mm / Diameter: 4mm
Qty: 1
2
boX ConTenTs
BLACK
Hex Wrench
If necessary, use the wrench help secure the surface mount.
Qty: 1
Conduit Plug
Qty: 1
Hex Wrench
If necessary, use the wrench to help secure the surface mount.
Conduit Plug
Qty: 1
aVaIlable MoDels
VTD-A2812/VWM
Alpha Mega Series 1000 TVL (1.39MP) Outdoor 2.8-12mm Varifocal
Vandal Dome - Ivory
VTD-A2812/VBM
Alpha Mega Series 1000 TVL (1.39MP) Outdoor 2.8-12mm Varifocal
Vandal Dome - Black
VTD-AR2812/VWM
Alpha Mega Series 1000 TVL (1.39MP) Outdoor 2.8-12mm Varifocal
Vandal Dome & 35 IR LEDs - Ivory
VTD-AR2812/VBM
Alpha Mega Series 1000 TVL (1.39MP) Outdoor 2.8-12mm Varifocal
Vandal Dome & 35 IR LEDs - Black
3
VTD-a2812/VM InsTallaTIon
* See Installation Tips on page 6
4
BLACK
VTD-aR2812/VM InsTallaTIon
* See Installation Tips on page 6
5
InsTallaTIon TIps
1.) Power Consumption - Amperage/Voltage
It is of utmost importance that the proper Voltage and Amperage is
used when applying power to your VITEK Alpha Series Dome Camera.
They can be powered by either 12V DC or 24V AC. Always use a UL
Listed power transformer. The Voltage must be measured at the camera
location. It is very important that the camera receives no less than the
required Voltage or it will be “Starved” and eventually die out. Cameras
with Infrared LEDs require substantially more Amperage than others so
please refer to the Specications (page 20-21) for the camera you are
installing.
6
black
osD opeRaTIon
7
osD opeRaTIon
Settings can be made using the Joystick located on the rear of the camera.
Please press joystick down
Push the joystick up or down to highlight the function you wish to change.
The Main Menu is displayed on monitor.
yellow
8
joystick
black
osD opeRaTIon
joystick
joystick
MAIN MENU
pressing
joystick
joystick
9
osD opeRaTIon
When the Main Menu screen is displayed move highlighted area to EXPOSURE
using the up/down of the joystick and then press down on the joystick to enter EXPOSURE Mode.
Highlight section to change by using joystick Up/Down. After section is highlighted us joystick
Left/Right to adjust settings.
Brighter video can be obtained by increasing the exposure
time at night with SENS-UP. SENS-UP is the maximum
integration of frames by DSS(Digital Slow Shutter) in low light.
When “SENS_UP” is on, shutter cannot be adjusted.
BRIGHTNESS: Adjusts the brightness of video(0~20).
LENS: When using the built-in lens, select either Manual (default) or DC.
When selecting Manual choose which Shutter speed to use.
10
black
osD opeRaTIon
When in the MAIN MENU highlight WHITE BAL by using the joystick up/down.
Select mode by moving joystick left or right.
This mode is for use in Halogen or extremely bright white light.
Joystick left to decrease, joystick right to increase.
Joystick left to decrease, joystick right to increase.
11
osD opeRaTIon
Adjust from 0~10 by using joystick left or right.
Used to inverse the picture.
corners
Adjust from 0~20 by using joystick left or right.
OFF, LOW, MIDDLE, HIGH, ACE performs an image enhancement process to enhance the image
by changing the brightness value.
12
black
osD opeRaTIon
Adjust from 0~20 by using joystick left or right.
Adjust from 0~20 with 0 being the left most area.
Adjust from 0~20 with 0 being the top area.
Adjust from 0~20 with 0 being the smallest area.
Adjust from 0~20 with 0 being the smallest area.
This function extends the gain range of the screen that is useful if
the camera takes a simultaneous picture of both indoor and
outdoor. It improves contrast of the picture in outdoor scenery as
well as indoor. Video image is processed from two images by dual
shutter (long and short shutter) in a eld to provide the best
dynamic range. Highlight area is compensated by the short shutter
and dark area is compensated by the long shutter. Final video may
have less contrast compared to the conventional camera which
does not have WDR function.
13
osD opeRaTIon
DAY or NIGHT is determined by the built-in light photo sensor. Camera with IR LED must be set to EXTERN
Used when DAY or NIGHT is determined by light level through the lens and DAY from/to NIGHT is switched
automatically by the scene brightness.
14
black
osD opeRaTIon
DNR is a technique of removing image noise from a video signal by applying a digital comb lter.
It makes images clearer and reduces video le size.
This Product has a feature that allows you to observe movement in 3 dierent areas on the screen and the
word MOTION will appear on screen when motion is detected.
15
SENSITIVITY: Adjust from 0~20 by using joystick left or right.
OBJ. KEEP LV: Adjust from 0~60 by using joystick left or right.
MOTION EST: Adjust from 0~20 by using joystick left or right.
WINDOW TONE: Adjust from 0~6 by using joystick left or right.
WINDOW ZONE: Adjust from 0~4 by using joystick left or right.
DET H-POS: Adjust from 0~60 by using joystick left or right.
DET V-POS: Adjust from 0~40 by using joystick left or right.
DET H-SIZE: Adjust from 0~40 by using joystick left or right.
DET V-SIZE: Adjust from 0~40 by using joystick left or right.
16
osD opeRaTIon
black
osD opeRaTIon
SHAKE SCALE: Adjust from 0~20 by using joystick left or right.
BRIGHT SCL: Adjust from 0~20 by using joystick left or right.
17
SERIAL: N/A
PEDESTAL: Adjust from 0~20 by using joystick left or right.
After entering FOCUS ADJ a box with 3 dierent boxes
within will appear on screen. Each box is to aid in focusing
of dierent scene contrasts, LEFT box for low contrast
MIDDLE box for medium contrast and RIGHT box for high
contrast. Adjust focus so no green will be in box of
selected contrast.
18
osD opeRaTIon
black
DIMensIons
VTD-A2812/VM
VT
5.85”
(148.6mm)
3.29”
(83.5mm)
1.81”
(46mm)
1.75”
(44.5mm)
5.85”
(148.6mm)
2.4”
(61.1mm)
4.26”
(108.3mm)
D-AR2812/VM
5.85”
(148.6mm)
3.29”
(83.5mm)
1.81”
(46mm)
19
1.75”
(44.5mm)
5.85”
(148.6mm)
2.4”
(61.1mm)
4.77”
(121.2mm)
speCIfICaTIons
VTD-A2812/VM
Image Device 1/2.9" Sony® CMOS
Resolution 1000 TV Lines
Min. Illumination 0.1 Lux (B/W) / 1.0 Lux (Color)
Effective Pixels 1305 x 1049 (1.39 MegaPixel)
S/N Ratio More Than 52dB (AGC Off)
Smart Motion Zoom YES
3D DNR YES
Defog YES
Standard Lens Varifocal 2.8-12mm IR Corrected
Power Source Dual Voltage 12VDC/24VAC Operation
Power Consumption (12VDC) 210 mA
Power Consumption (24VAC) 230 mA
Environmental 14°F~122°F (-10°C~50°C) at 30%~80% RH
Dimensions 5.45” x 3.7” (138.30mm x 93.76mm)
Weight 0.62lbs (272g)
20
black
speCIfICaTIons
VTD-AR2812/ VM
Image Device 1/2.9" Sony® CMOS
Resolution 1000 TV Lines
Min. Illumination
Effective Pixels 1305 x 1049 (1.39 MegaPixel)
S/N Ratio More Than 52dB (AGC Off)
Smart Motion Zoom YES
3D DNR YES
Defog YES
Standard Lens Varifocal 2.8-12mm IR Corrected
Power Source Dual Voltage 12VDC/24VAC Operation
Power Consumption (12VDC) 210ma / 800ma (IR OFF/ON)
Power Consumption (24VAC) 230ma / 760ma (IR OFF/ON)
Environmental 14°F~122°F (-10°C~50°C) at 30%~80% RH
Dimensions 5.45” x 3.7” (138.30mm x 93.76mm)
Weight 0.62lbs (272g)
0.1 Lux (B/W) / 1.0 Lux (Color) / 0 Lux with IR LEDs
On
21
22
noTes
black
VITEK LIM ITE D PRODUCT WARRANTY
VITEK products carry a three (3) year limited warranty. VITEK warrants to the purchaser
that products manufactured by VITEK are free of any rightful claim of infringement or
the like, and when used in the manner intended, will be free of defects in materials and
workmanship for a period of three (3) years, or as otherwise stated above, from the
date of purchase by the end user. This warranty is nontransferable and extends only to
the original buyer or end user customer of a Vitek Authorized Reseller.
The product must have been used only for its intended purpose, and not been subjected to damage by misuse, wilful or accidental damage, caused by excessive voltage
or lightning.
The product must not have been tampered with in any way or the guarantee will be
considered null and void.
This guarantee does not affect your statutory rights.
Contact your local VITEK Reseller should servicing become necessary.
VITEK makes no warranty or guarantee whatsoever with respect to products sold or
purchased through unauthorized sales channels. Warranty support is available only if
product is purchased through a VITEK Authorized Reseller.
28492 Constellation Road ValenCia, Ca 91355
WWW.ViteKCCtV.CoM
Version 2.0
November 2014
3700-8622A
Loading...