Vitek VTC-TNB3RVE, VT-TNB3CKTFE, VT-TNB3CKTFE-2 Quick Start Guide
VTC-TNB3RFE
VTC-TNB3RVE
Transcendent Series 3 Megapixel
Indoor/Outdoor WDR IP Camera with
IR LED Illumination
VITEK
QUICK START GUIDE
VITEK
FEATURES
• 1/3” 3.0 Megapixel CMOS Image Sensor
• Up to 30fps live view @ 3 MegaPixel (2048x1536)
• 2.8mm or 3.6mm Fixed Iris Lens Options (VTC-TNB3RFE) /
2.8~12mm Varifocal Lens (VTC-TNB3RVE)
• 42 Infrared LED’s with 150’ IR Range (VTC-TNB3RFE) / 36
Infrared LED’s with 120’ IR Range (VTC-TNB3RVE)
• Digital Wide Dynamic Range (D-WDR)
• True Mechanical Day/Night function by ICR
• 3D-DNR Noise Reduction
• On Board Motion Detection, Privacy Masking, and ROI
• H.264 & MJPEG Compression
• Remote Viewing via CMS, Internet Explorer, and iOS & Android
Apps
• ONVIF Compliant
• IP66 Weather Resistance
• Optional Junction Box Mount Available (VT-TJB01)
• 12VDC & PoE (Power over Ethernet) Operation
PLEASE NOTE:
Complete User Guide, Software, Tools, and Updates are
available online. Scan the QR Code or visit:
http://www.vitekcctv.com/Downloads
Components and Accessories
Camera
Quick Guide
Screws
Drill Template
Rubber Plug
Network Coupler
Overview
This camera series supports both fixed and varifocal lenses. Please note
that the zoom and focus features mentioned below are only available on
the varifocal lens version.
3
4
1 2
5
6
7
1
2
3
4
Mount Lock
Mount Base
RJ-45 Ethernet
Power Cable
*VTC-TNB3RVE Only
5
6
7
Lens Cover
Zoom*
Focus*
2 3
Cable Connections
First connect the Waterproof Cap to an Ethernet patch cable, then
connect the cameras ethernet adaptor. If not powering the camera with
PoE, also connect the power Cable to an approved 12VDC Power
Supply.
Network Cable
12VDC
Optional 12VDC
Power Connection.
Not needed with PoE
Weather Resistant Network Coupler
1. Loosen the nut from the Weather Resistant Network Coupler,
2. Run ethernet cable through coupler, then attach a RJ-45 connector.
3. Tighten the nut and coupler for a weather resistant seal.
3
Loading...