Vitek VTD-THMD2RF-2, VTD-THD16R2F-2, VTC-THT24R2FB, VTC-THB36R2F-2 User Manual

VITEK

FEATURES

• 1/2.8” 2.1 Megapixel Progressive Scan CMOS Sensor

• Advanced Starlight Technology Offers Dramatically Higher Sensitivity to Light Producing Color Images in Very Dark & Night Scenes

• 2.1 MegaPixel High Definition Analog (HDA): HD-TVI , AHD, CVI / 960H: CVBS: Output

• 2.8 or 3.6mm Fixed Lens Options

• Infrared LED’s with up to 120’ IR Range

• True Wide Dynamic Range (WDR)

PLEASE NOTE:

Complete User Guide, Software, Tools, and Updates are available online. Scan the QR Code or visit: http://www.vitekcctv.com/Downloads

VTC-THB36R2F VTD-THD16R2F

VTD-THMD2RF

VTC-THT24R2F

Transcendent 2.1 Megapixel Indoor/

Outdoor 4-IN-1 HDA Cameras w/IR LED

Illumination

• True Mechanical Day/Night function by ICR

• 3D-DNR Noise Reduction

• IP66 Weather Resistance & IK10 Impact Rating

• Supports Up The COAX Control

• Over 1500’ HD Video Transmission (Depending on cable characteristics and integrity)

• Optional Junction Box & Wall Mounts Available

• 12VDC Operation

• 3 Year Warranty

Safety Precaution

To prevent electrical shock and risk of fire hazards, do not expose this unit to rain or moisture and only use specified power source..

CAUTION: TO REDUCE THE RISK OF ELECTICAL SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

The symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electrical shock.

The symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the unit.

Warning :

This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at their own expense.

Caution : Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Main power quality should be that of a typical commercial environment. If the user of the model requires continued operation during power interruptions, it is recommended that the device be powered from an uninterruptible power supply (UPS).

Limited Product Warranty

VITEK products carry a three (3) year limited warranty. VITEK warrants to the purchaser that products manufactured by VITEK are free of any rightful claim of infringement or the like, and when used in the manner intended, will be free of defects in materials and workmanship for a period of three (3) years, or as otherwise stated above, from the date of purchase by the end user. This warranty is nontransferable and extends only to the original buyer or end user customer of a VITEK Authorized Reseller.

The product must have been used only for its intended purpose, and not been subjected to damage by misuse, willful or accidental damage, caused by excessive voltage or lightning.

The product must not have been tampered with in any way or the guarantee will be considered null and void.

This guarantee does not affect your statutory rights.

Contact your local VITEK Reseller should servicing become necessary.

VITEK makes no warranty or guarantee whatsoever with respect to products sold or purchased through unauthorized sales channels. Warranty support is available only if product is purchased through a VITEK Authorized Reseller.

VTC-THB36R2F Components

Camera

User Manual

Screws

Drill Template

Overview

3 4

Video Connection

Connect the BNC video connector to a BNC cable, then to a DVR.

Monitor

Video

Video Output Mode Switch:

Select the desired video mode using the dip switches contained within the on-cable Output Mode Switch as follows:

Power Connection

Connect the power connector to a regulated 12 VDC power adaptor.

AHD

HD-TVI

CVBS

CVI

Lens

Sun Shield

Mount Lock

Mount Base

BNC Video Output

Output Mode Switch

Power Cable

12VDC

Power

Installation

Before you begin, please make sure that the wall or ceiling is strong enough to withstand 3 times the weight of the camera. The mounting steps are as follows:

1. Attach the drill template to the place where you want to install the camera, then drill 3 screw holes and 1 cable hole (if you want to route the cables through the mounting base) according to the drill template

3. Loosen the mount lock to adjust the Pan and Tilt of the camera, then tighten the mount lock to secure the viewing angle adjustments.

360° Pan

90° Tilt

2. Route the cables and connect the power & video cables, then secure the mounting base to the ceiling or wall with screws.

Ceiling Mounted

Wall Mounted

4. Carefully remove the protective film from the lens to complete the installation.

Protective

Lens Film

VTC-THT24R2F Components