Page 1
VTC-IRA24F
Day/Night 960H Infrared
Bullet Camera
• 1/3” High Density Sony Super HAD CCD (960H) w/
Effio-A DSP
• 750 TV Lines of Resolution (960H)
• E-WDR by ATR-EX (Adaptive Tone Reproduction)
• Lens Shading Compensation
• 24 Dynamic Infrared LEDs with up to 65’ Range
• 0.003 Lux / 0 Lux with IR LEDs On
• IR Corrected 3.6mm Electronic Iris Lens / Smart IR /
Mirror
• D-WDR / Backlight & Hightlight Compensation
• 3DNR Noise Reduction
• Privacy Masking / Motion
• ATW / Push / User1 / User2 / MANUAL / Push Lock
• OSD (On Screen Display) menu and Camera ID
• 3-Axis Concealed Bracket
• IP-67 Rated Water Resistance
• Cable Feed Through Mount for tamper resistance
• 12 VDC Operation
VITEK
Page 2
VTC-BRE24F / VTC-IRE24F
1
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of non-insulated
dangerous voltage within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
This installation should be made by a qualified service person and should conform to all local codes.
VTC-IRA24F
1
Page 3
Warnings ........................................ 3
Precautions .................................... 4
Features ......................................... 5
OSD Setup Menu Tree.................... 6
Setup Menu (OSD) ........................ 11
1. Scene Select ..............................12
1.1 Shutter/AGC ........12
1.2 White Bal .............13
1.3 HLC/BLC .............14
1.4 ATR/EX ................15
1.5 DNR .....................15
1.6 Day/Night .............16
1.7 IR Optimizer .........18
2. Pict Adjust .................................. 19
3. EZOOM ...................................... 20
4. DIS ............................................. 20
5. Privacy Mask .............................. 21
6. Motion Detection ........................ 22
7. Sys Setting ................................. 23
7.1 Communication .. 23
7.2 Camera ID .......... 24
8. Language ................................... 24
9. Version ....................................... 24
10. Maintenance ............................ 25
10.1 W.Pix Mask ...... 25
11. Exit ........................................... 26
Dimensions .................................... 27
Specifications ................................. 28
Spire Series ................................... 29
Warranty .........................................30
TABLE OF CONTENTS
VTC-IRA24F
2
Page 4
The camera needs periodic inspection.
• Contact an authorized technician for inspection.
Stop using camera if there is a malfunction.
• If your using your camera around smoke or inusual heat for a
long time, fire may be caused.
Do not install the camera on a surface that can not support it.
• Unless the surface is suitable, injury or other hazards may occur.
Do not disassemble the camera.
• It may result in re, electric shock or other hazards.
Do not hold plug with wet hands.
• It could cause an electric shock.
Do not use the camera close to a gas or oil leak.
• It may result in re or hazards.
VTC-IRA24F
3
Warnings
Page 5
Precautions
VTC-IRA24F
4
Ø Do not install the camera in extreme temperature conditions.
• Only use the camera under conditions where temperatures are
between -14˚F and +122˚F.
• Be especially careful to provide ventilation when operating under
high temperatures.
Ø Do not drop the camera or subject it to physical shocks.
• It may cause malfunctions to occur.
Ø Never point camera into a strong light source, such as the sun
or bright spotlight.
• It can damage the CMOS Sensor.
Ø Do not expose the camera to radioactivity.
• This will damage the CMOS sensor.
NOTE
• If the camera is exposed to spotlight or object reecting strong
light, smear or blooming may occur.
• Please check power specs before connecting power.
Page 6
• 1/3” High Density Sony Super HAD CCD (960H) w/Efo-A DSP
• High Resolution of 750 TVL
• E-WDR by ATR-EX (Adaptive Tone Reproduction)
• 24 Dynamic Infrared LEDs with up to 65’ Range
• 0.003 Lux / 0 Lux with IR LEDs On
• IR Corrected 3.6mm Electronic Iris Lens / Smart IR / Mirror
• Auto Day/Night
• DIS(Digital Image Stabilizer), LSC (Lens shading compensation)
• BLC / HLC / Flickerless
• Anti-Color Rolling
• De-Fog
• Motion Detection
• Privacy Masking
• Advanced Digital Noise Reduction(2D + 3D)
• OSD (On Screen Display) menu and Camera ID
• IP67 Rated Water Resistance
• 12VDC Operation
FEATURES
6
VTC-IRA24F
5
Page 7
OSD MENU TREE
[OSD Setup Menu]
SETUP
SCENE SELECT
PICT ADJUST
EZOOM
DIS
PRIVACY MASK
MOTION DET
SYS SETTING
LANGUAGE
VERSION
MAINTENANCE
EXIT
MAIN MENU
SUB MENU Ⅰ
SUB MENU Ⅱ
ADJUSTMENT
SCENE SELECT
CUSTOM /
FULL AUTO /
INDOOR /
OUTDOOR /
BACKLIGHT /
ITS
SHUTTER/AGC
AUTO
AE LEVEL
1 ~ 250
AGC MAX
6 ~ 44.8 DB
SENS UP
AUTO / OFF
RETURN
MANUAL
SHUTTER
2 ~ 256 FLD, 1/50 ~
1/10000
AGC MAX
6 ~ 44.8 DB
RETURN
FIX
SHUTTER
2 ~ 256 FLD, 1/50 ~
1/10000
AGC
0 ~ 44.8 DB
RETURN
WHITE BAL
ATW
SPEED
0 ~ 255
DELAY CNT
0 ~ 255
ATW
FRAME
0 ~ 255
ENVIRONM
ENT
ATUO / INDOOR /
SUNNY / SHADE
RETURN
PUSH
USER1
B-GAIN
0 ~ 255
R-GAIN
0 ~ 255
RETURN
USER2
B-GAIN
0 ~ 255
R-GAIN
0 ~ 255
RETURN
MANUAL
LEVEL
0 ~ 63
RETURN
PUSH LOCK
HLC/BLC
HLC
CLIP LEVEL
0 ~ 255
RETURN
BLC
OFF
6
VTC-IRA24F
Page 8
OSD MENU TREE
MAIN MENU
SUB MENU Ⅰ
SUB MENU Ⅱ ADJUSTMENT
SCENE SELECT
CUSTOM /
FULL AUTO /
INDOOR /
OUTDOOR /
BACKLIGHT /
ITS
ATR-EX
ON
CONTRAST
LOW / MID / HIGH
CLEAR FACE
OFF / LOW / MID / HIGH
RETURN
OFF
DNR
LEVEL 0 ~ 6
RETURN
DAY/NIGHT
AUTO
BURST
ON / OFF
CNTL SIGNAL
INT / EXT1 / EXT2
DELAY CNT
0 ~ 255
DAY→NIGHT
0 ~ 255
NIGHT→DAY
0 ~ 255
RETURN
DAY
NIGHT
BURST
ON / OFF
RETURN
IR
OPTIMIZER
ON
MODE AUTO / CENTER
IR AREA
TOP
0~6
BOTTOM
0~6
LEFT
0~8
RIGHT
0~8
WEIGHT
0~15
RETURN
LEVEL 0 ~ 12
IR LED
DAY/NIGHT
LEVEL
MIN
0 ~
255
LEVEL
MAX
0 ~
255
RETURN
FIX
LEVEL
0 ~
255
RETURN
OFF
COLOR
NIGHT
ON
COLOR
GAIN
LOW
/ MID
/
HIGH
RETURN
OFF
VTC-IRA24F
7
Page 9
OSD MENU TREE
MAIN MENU
SUB MENU Ⅰ
SUB MENU Ⅱ ADJUSTMENT
SCENE
SELECT
CUSTOM /
FULL AUTO /
INDOOR /
OUTDOOR /
BACKLIGHT /
ITS
IR OPTIMIZER
ON
IR SHADE
COMP
ON
PATTERN
SET 1 ~ 3
POSH 0 ~ 959
POSV 0 ~ 959
LEVEL
OFF /
LOW /
MID /
HIGH
RETURN
OFF
RETURN
OFF
LENS SHD
COMP
ON
PATTERN
SET 1 ~ 3
POSH
0 ~ 959
POSV
0 ~ 959
RETURN
OFF
DEFOG
ON
LEVEL
LOW / MID / HIGH
RETURN
OFF
FLK LESS
AUTO
MODE
SHUTTER FIX / GAIN CNTL
RETURN
ON
MODE
SHUTTER FIX / GAIN CNTL
RETURN
OFF
ANTI CR
AUTO / ON / OFF
RETURN
PICT
ADJUST
BRIGHTNESS 0 ~ 255
CONTRAST 0 ~ 63
SHARPNESS 0 ~ 15
HUE 0 ~ 127
COLOR GAIN 0 ~ 255
RETURN
EZOOM
ON
MAG 0 ~ 255
PAN 0 ~ 1023
TILT 0 ~ 511
RETURN
OFF
VTC-IRA24F
8
Page 10
OSD MENU TREE
MAIN MENU
SUB MENU Ⅰ
SUB MENU Ⅱ
ADJUSTMENT
DIS
ON / OFF
PRIVACY MASK
AREA SEL
1/15 ~ 15/15
DISPLAY
ON / OFF
POSITION
COLOR
BLUE / YELLOW / CYAN / MAGENTA / WHITE / BLACK / RED / GREEN
TRANSP
0.00 ~ 1.00
MOSAIC
ON / OFF
RETURN
MOTION DET
ON
DETECT SENSE
0 ~ 127
INTERVAL
0 ~ 127
BLOCK DISP
ON / OFF
MASK AREA
1 ~ 96
RETURN
MONITOR AREA
AREA SEL
1/4 ~ 4/4
AREA MODE
ON /OFF
TOP
0 ~ 15
BOTTOM
LEFT
RIGHT
RETURN
RETURN
OFF
SYS SETTING
SYNC MODE
INT
LENS
AUTO
TYPE
DC / VIDEO
MODE
AUTO
OPEN
CLOSE
ADJUST
ENTER TO CANCEL
SPEED
0 ~ 255
MANUAL
VTC-IRA24F
9
Page 11
OSD MENU TREE
MAIN MENU
SUB MENU Ⅰ
SUB MENU Ⅱ
ADJUSTMENT
SYS SETTING
FLIP
V / H / HV / OFF
LCD/CRT
LCD / CRT
COMMUNICATION
PROTOCOL
PELCO-D
ADDRESS
1 ~ 255
BAUDRATE
2400 / 4800 / 9600 / 19200 / 38400 / 57600 / 115200
DATABIT
8 BIT
PARITY
ODD / EVEN / OFF
STOPBIT
1 BIT
RETURN
CAMERA ID
ON / OFF
RETURN
LANGUAGE
ENGLISH / ESPAÑOL / РУССКИЙ / PORTUGUÊS / DEUTSCH / FRANCAIS / 日本語
VERSION
MAINTENANCE
W.PIX MASK
MANUAL
REGISTRATION
REG.POINT
WHITE / BLACK / OFF
CURSOR
COLOR
WHITE / BLACK / RED / GREEN
/ BLUE
BLINK
ON /OFF
REG.NUMBER
RETURN
AUTO
LEVEL 1
0 ~ 255
LEVEL 2
0 ~ 255
AUTO
RETURN
DATA CLEAR
CAMERA RESET
RETURN
EXIT SAVE / NOT SAVE / CANCEL / BACK
VTC-IRA24F
10
Page 12
VTC-IRA24F
11
SETUP MENU (OSD)
[HOW TO OPERATE OSD JOYSTICK]
[OSD SET UP]
Press Enter button of the OSD Joystick to enter into OSD main menu.
Page 13
VTC-IRA24F
12
SETUP MENU (OSD)
1. SCENE SELECT
You can select options according to the environment: FULL AUTO, INDOOR, OUTDOOR,
BACKLIGHT, ITS (Traffic Monitoring) and CUSTOM (User defined).
1.1. SHUTTER/AGC
This function can set the SHUTTER/AGC level to AUTO, MANUAL or FIX.
SHUTTER/AGC DESCRIPTION
AUTO
Video level is automatically controlled by settings of AE LEVEL, AGC, MAX
and SENS UP. Under lowest light level, AGC is maximized by automatic
gain controller Also can set SENS UP, ON or OFF.
MANUAL
Video level is manually controlled by the settings of SHUTTER, AGC MAX.
Available DC Auto Iris Lens only in this mode.
FIX
Video level is fixed.
Page 14
VTC-IRA24F
13
SETUP MENU (OSD)
1.2. WHITE BAL
You can choose from different white balance modes: ATW, PUSH, USER1, USER2, MANUAL and
PUSHLOCK.
Only when you choose the CUSTOM mode in the SCENE SELECT menu will the ‘WHITE BALANCE’
sub-menu ATW/ PUSH/ USER1/ USER2/ MANUAL/PUSH LOCK appear, you can now adjust the
mode.
Otherwise the white balance is fixed. The other mode in the SCENE SELECT sub menu is a fixed
ATW setting only.
1.2.1. ATW (AUTO WHITE BALANCE)
You can set the SPEED, DELAY CNT, ATW FRAME and ENVIRONMENT.
ATW DESCRIPTION
SPEED Set the AWB compensating speed
DELAY CNT
Adjusts the AWB compensation delay to next update of AWB.
ATW FRAME Determines the ATW range with respect to the fundamental range.
ENVIRONMENT Select INDOOR, SUNNY, SHADE or AUTO.
Page 15
VTC-IRA24F
14
SETUP MENU (OSD)
1.3. HLC/BLC
HLC (HIGHLIGHT COMPENSATION)
This function is used to black out highlighted areas in order to enable a clear visual image of objects,
such as the license plates of an oncoming vehicle or other objects that may be obstructed by bright
headlamps.
BLC (BACKLIGHT COMPENSATION) :
This is a useful function that brightens an image in the foreground with a highly lite area behind it
such as sunlight thus eliminating the affect of a silhouette.
Page 16
VTC-IRA24F
15
SETUP MENU (OSD)
1.4. ATR-EX (Adaptive Tone Reproduction-EX)
Set to enable or disable ATR (Adaptive Tone Reproduction) compensation for a better dynamic
range (D-WDR) of the image. This function provides gradation compensation to improve the contrast
of subjects whose gradation has been lost in cases where both low-luminance and high-luminance
areas exist in the same picture.
1.4.1. ATR-EX SETUP
User can select CONTRAST and CLEAR FACE values from LOW / MID / HIGH to achieve the
best image quality.
1.5. DNR
You can adjust the level of noise reduction, the bigger the value, the higher the noise reduction level.
DNR (Digital Noise Reduction) removes the temporal noise reduction by 3D filtering while using
frame memory spatial noise is reduced by the 2D filtering. Setting a higher level of noise reduction
may result in the loss of sharpness and the tail effect of a comet may occur.
Page 17
VTC-IRA24F
16
SETUP MENU (OSD)
1.6. DAY/NIGHT
Day/night function is for the user to use the camera for different occasions. There are three modes,
DAY, NIGHT and AUTO
DAY/NIGHT
DESCRIPTION
AUTO
This function controls the camera output Color or B&W image according to
the strength of the light. You Can set the parameter according to the
environment. Camera decides DAY or NIGHT through in coming light level
itself.
DAY Video is always in Color.
NIGHT Video is always in Black & White.
Page 18
VTC-IRA24F
18
SETUP MENU (OSD)
1.7. IR OPTIMIZER
This is a useful function for IR LED cameras in night mode only.
If subjects which can cause overexposure are located near the monitored area, you can adjust IR
OPTIMIZER level or area by Selecting ON or OFF.
If IR OPTIMIZER is set to “ON”,
IR OPTIMIZER
DESCRIPTION
MODE
Select AUTO or CENTER to reduce over-saturation.
AUTO: Reducing the over-
saturation is automatically adjusted along with the
location of the subject.
IR AREA
Sets the IR OPTIMIZER AREA and the function works selected area in
‘CUSTOM preset only.
LEVEL
This function is used to adjust the overall when IR OPTIMIZER is working. If
the LEVEL is too high, the over-saturation could occur.
IR LED
Set the IR LED ON/OFF
• DAY/NIGHT : Follows the setting automatically DAY/NIGHT function.
• OFF : Turn IR LED off.
• FIX : Fixes the brightness of IR LED in any condition.
COLOR NIGHT Displays night video in color.
IR SHADE COMP
This function is used to compensate for IR shade of the side area on screen
when IR LED is ON. You can adjust the shading PATTERN, POSITION and
LEVEL.
If the LEVEL is high, the screen noise could be increased at the side area.
MODE
DESCRIPTION
LENS SHD COMP
Lens shading compensation. This function is used to calculate the
compensation data for lens shading. The convex shape of the lens causes
the light to enter the camera unevenly and typically makes the center of the
screen brighter than the rest. It is used to compensate for this undesirable
effect and make the screen more even.
DEFOG
• You can choose the Defog function according to the environment.
The visibility of the camera can be enhanced in any weather
condition. You can select from Off/Low/Middle/High to display.
• If set to ON, the WDR/BLC function will be deactivated.
FLK LESS
This function is used to remove the flickering on screen due to differences in
light and electric frequencies. Selects AUTO, OFF or ON.
ANTI-CR
This mode can minimize the problems related to color rolling caused by
differences between the flicker of fluorescent lights and the frequency of the
camera. Selects AUTO, OFF or ON
Page 19
VTC-IRA24F
19
SETUP MENU (OSD)
2. PICT ADJUST
PIC ADJUST
DESCRIPTION
BRIGHTNESS
Increases or decreases the brightness of the picture.
Do not increase this too much this will cause the dynamic range for the
highlighted areas to decrease.
CONTRAST
Adjust the strength of the image Contrast. If Contrast is set to too high, the
dark area may lose detail and the high luminance area may be saturated.
SHARPNESS
Increase or decreases the Sharpness of the picture.
Setting the Sharpness too high will cause more noise and a harsh image.
HUE
Adjusts hue for NTSC version only.
COLOR GAIN Increases or decreases the Color Saturation.
Page 20
20
VTC-IRA24F
SETUP MENU (OSD)
3. EZOOM
Sets the maximum digital zoom magnification. E.ZOOM function enlarges the pixel itself, which can
cause deterioration of the picture quality.
You can setup according to the needs of area size and position.
EZOOM
DESCRIPTION
MAG
MAG is the magnification ratio of the electronic zoom. Sets from x000 to
x255.
PAN
When MAG is greater than 0, the electronic pan is available. 000 is the left
most pan and 1023 is the right most pan.
TILT
When MAG is greater than 0, the electronic tilt is available. 000 is the upper
most tilt and 511 is the lower most tilt.
4. DIS (Digital Image Stabilization)
This function is used to reduce and stabilizes the shaky image from a camera installed in the vibrated
area. FOV(Field of view) will be reduced if set to ON.
Page 21
21
VTC-IRA24F
SETUP MENU (OSD)
5. PRIVACY MASK
Sets ON/OFF for enabling/disabling PRIVACY. Up to 15 privacy areas are available and each area is
programmable in size, position, color and transparency of the chosen area.
• The privacy areas are masked with the color selected by PRIVACY MASK>COLOR.
PRIVACY MASK
DESCRIPTION
AREA SEL Select the area to be masked AREA1~AREA15 to be adjusted.
DISPLAY
Choose ON / OFF for the masked areas which you selected ‘AREA SEL’.
POSITION Adjust the masked area positions by UP/DOWN/LEFT/RIGHT.
COLOR:
Selects one of 8 colors (Red, Green, Blue, Yellow, Cyan, Magenta, White
and Black) for selected mask window at ‘AREA SEL’.
TRANSP Transparency rate for the mask can be adjusted.
MOSAIC
Enables or disables the mosaic effect for the selected mask window at
‘AREA SEL’.
Page 22
22
VTC-IRA24F
21
SETUP MENU (OSD)
6. MOTION DETECTION
Up to 4 Motion Detection areas are available settings include DETECTION SENSE / INTERVAL /
BLOCK DISP / MASK AREA / MONITOR AREA and each area is programmable in size and location.
MOTION DETECTION
DESCRIPTION
DETECT SENSE
Adjust the sensitivity level for detecting motion. A higher value is more
sensitive.
INTERVAL
Set the interval time from the starting motion operation until being ready for
the next motion operation.
BLOCK DISP
Enables or disables displaying blocks for the area which the motion is
detected.
MASK AREA
Sets MASK AREA for disabling MOTION DETECTION. Selects number of
area cells to set the area you need.
MONITOR AREA
Sets the MOTION DETECTION area on screen. For visual surveillance area
and you can adjust the parameter values to adjust the surveillance area
location.
6.1. BLOCK DISP
The motion is displayed by means of blocks when MOTION DET and MOTION DET>BLOCK DISP
are ON.
Page 23
23
VTC-IRA24F
SETUP MENU (OSD)
7. SYS SETTING
SYS SETTING
DESCRIPTION
LENS
Selects the lens type: AUTO or MANUAL.
•
AUTO
FLIP
Use to inverse the pictures coming from the camera.
• V : Vertical Flips the video signal vertically
• H : Horizontal Flips the video signal horizontally
• HV : Horizontal and Vertical Flips the video signal horizontally and
vertically.
LCD/CRT
Select the correct type of viewing monitor CRT or LCD this will ensure the
most optimal picture.
COMMUNICATION
Set up COMMUNICATION related functions PROTOCAL / ADDRESS /
BAUD RATE / DATAIT / PARITY / STOPBIT according to your needs.
CAMERA ID Set the camera ID as numbers, uppercase letters, and related symbols.
7.1. COMMUNICATION
Set up COMMUNICATION related functions PROTOCAL / ADDRESS / BAUD RATE / DATAIT /
PARITY / STOPBIT according to your needs.
Page 24
24
VTC-IRA24F
SETUP MENU (OSD)
7.2. CAMERA ID
Set the camera ID as numbers, uppercase letters, and related symbols.
• ←↑↓→ : Up/Down, Left/Right
• CLR : clear camera name
• POS : for position.
• RETURN” : return to the upper menu.
8. LANGUAGE
Select from 8 languages: ENGLISH, SPANISH, RUSSIAN, PORTUGUESE, GERMAN, FRENCH,
CHINESE and JAPANESE.
9. VERSION
The camera firmware version is displayed.
Page 25
25
VTC-IRA24F
SETUP MENU (OSD)
10. MAINTENANCE
Set up functions for WHITE PIXEL MASK and CAMERA RESET.
10.1. W.PIX MASK
This function is used to compensate white pixels. When used camera in high-temperature
environment, there might be dead pixel on image CCD sensor. With this function ON the dead pixel is
to be masked so as to improve the picture quality. There are three settings: MANUAL / AUTO / DATA
CLEAR.
MAINTENANCE
MODE
DESCRIPTION
MANUAL
COMP
REGISTRATION
Detect each white pixel using the cursor.
REG. POINT
Displays detected white pixels in color.
CURSOR COLOR
Select cursor color: WHITE / BLACK / RED / GREEN / BLUE
BLINK
Set the cursor to blink or not blink.
REG. NUMBER
Display quantity of detected white pixels.
AUTO COMP
LEVEL1
Sets the threshold to detect white pixels.
LEVEL2
Sets the threshold to detect very large white pixels.
AUTO
Start automatic detection of white pixels.
DATA CLEAR
Clear the W.PIX data or not.
CAMERA
RESET
This function is used to RESET to the factory defaults of the
camera settings. You should confirm before using this
operation.
Page 26
26
VTC-IRA24F
SETUP MENU (OSD)
11. EXIT
Exits SETUP MENU and returns to the normal display.
EXIT MODE
DESCRIPTION
SAVE Saves all the settings before exiting the setup menu.
NOT SAVE
Exit the setup menu without saving.
CANCEL Cancel the exit mode.
BACK Go back to the previous menu mode.
Page 27
27
VTC-IRA24F
Dimensions
(unit: inches)
2.58”
2.80”‘
2.01”
7.09”
3.64”
7.09”
3.64”
2.28”
Page 28
VTC-IRA24F
28
Image Device
Resolution
Effective Pixels
Minimum illumination
Infrared LEDs
IR Distance
Day/Night
Built-In Lens
Light Compensation
Noise Reduction
White Balance
E-WDR
Lens Shading Compensation
Motion Detection
Privacy Masking / Motion
Water Resistance
Power Source
Power Consumption
Operating Conditions
Dimensions
Specifications
1/3” High-Resolution Inter-Line CCD (960H) w/ Effio A
750 TVL (960H)
976(H) x 494(V)
0.003 Lux (0 Lux with LED ON)
24 Dynamic IR LEDs
65’ (20m)
Auto
3.6mm IR Corrected Lens
HLC (Highlight Compensation) / BLC (Backlight Compensation)
3DNR
ATW / Push / User1 / User2 / MANUAL / Push Lock
E-WDR by ATR-EX
YES
YES
UP to 15 Programmable Mask Areas
IP67
DC12V (±10%)
70mA / 240mA (IR OFF/ON)
14°F to +140°F (-10°C to +60°C) @ 85% RH
2.80” x 7.09” x 2.58” (71 x 180 x 65.5mm)
Page 29
VTC-IRA24F
29
VT-SRL Series
Spire Series 4, 8, & 16 Channel 960H Digital Video
Recorders
• Supports High Resolution 960H Cameras
• 4, 8 or 16 Video Inputs with 1 HDMI, 1 Spot Monitor Output, and 1 VGA output
• H.264 Compression
• Up to 480fps Live Display & 480fps Recording (VT-SRL916) / 240/240
(VT-SRL908) / 120/120 (VT-SRL904)
• Supports both Dynamic and Static IP Addresses
• 4 Alarm Inputs / 1 Relay Out
• Supports two internal Hard Drives (VT-SRL908/VT-SRL916) / One internal Hard
Drive (VT-SRL904)
• Remote Viewing over the Internet, LAN, Explorer, Safari, Firefox, Opera and Chrome
• Applications for iPhone, iPad, iTouch and Android Devices
• Mac OSX Client & PC CMS Central Management Software Included
• Thumbnail Search
• Automatic sending of Health & Event notifications via email
• Control locally via USB Mouse or with the Included IR Remote control
• PTZ Control over RS-485
OTHER PRODUCTS FROM VITEK
Spire Series 960H Digital
Video Recorders
Page 30
VITEK LIMITED PRODUCT WARRANTY
VITEK products carry a three (3) year limited warranty. VITEK warrants
to the purchaser that products manufactured by VITEK are free of
any rightful claim of infringement or the like, and when used in the
manner intended, will be free of defects in materials and workmanship
for a period of three (3) years, or as otherwise stated above, from the
date of purchase by the end user. This warranty is non-transferable
and extends only to the original buyer or end user customer of a Vitek
Authorized Reseller.
The product must have been used only for its intended purpose, and
not been subjected to damage by misuse, willful or accidental damage,
caused by excessive voltage or lightning.
The product must not have been tampered with in any way then the
guarantee will be considered null and void.
This guarantee does not affect your statutory rights.
Contact your local VITEK Reseller should servicing become necessary.
Vitek makes no warranty or guarantee whatsoever with respect to
products sold or purchased through unauthorized sales channels.
Warranty support is available only if product is purchased through a
Vitek Authorized Reseller.
28492 Constellation Road ValenCia, Ca 91355
WWW.ViteKCCtV.CoM | 888-ViteK-70
Loading...