You are about to see how quick, easy and delicious healthy eating can be!
Please read all the safety information, warnings and instructional material found
in this booklet before getting started. Set your Vitamix machine on a dry, level
surface. Make sure the power switch is set to OFF and that the machine is
plugged into an earthed electrical outlet. Then, follow the cleaning instructions
on page 18 to prepare your machine for use. Always clean your machine before
you firstuseit.
3
SERVICE AND REGISTRATION
Vitamix Service
Record the model number and serial number of your Vitamix in the spaces
provided below for future reference. These numbers can be found on the back
of the motor base.
Model Number
Serial Number
Date of Purchase
Purchased From
Before returning this product for any reason, including repair, first contact
your local dealer or distributor. Refer to International Distributors for Service
onpage23.
Product Registration
If you purchased your Vitamix machine from an International Distributor or
Dealer in countries other than the United States, Canada, the United Kingdom or
Ireland, your product is warranted through the International Distributor or Dealer
and need not be registered with the Vita-Mix Corporation. Refer to International
Distributors for Service on page 23.
4
IMPORTANT INSTRUCTIONS
FOR SAFE USE
WARNING
To Avoid Injury.
Read and understand the instruction
manual before using this machine.
Basic safety precautions should be
followed, including the following.
1. Read all instructions, safeguards and warnings before operating the blender.
2. This blender is intended for HOUSEHOLD USE ONLY and is not intended to
be used to prepare food for commercial sale or for any other commercial use.
3. This blender is not intended for use by persons with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
4. This blender is not intended for use by children, and close supervision is
necessary when used near children. Children should be supervised to ensure
that they do not play with the blender.
WARNING
Electrical Shock Hazard.
Use an earthed outlet only.
DO NOT remove earth.
DO NOT use an adaptor.
DO NOT use an extension cable.
Failure to follow instructions can cause death or
electrical shock.
5. Operate only when the blender is on a flat and stable surface, free from
standing water. Do not let the container, motor base or power cable touch
hot surfaces or hang over the edge of a table or counter.
6. Do not fill the container beyond its stated capacity. The maximum capacity is
marked on the container.
7. Always begin blending with lid and lid plug firmly in place. Do not operate
blender with the lid removed. The lid plug should be removed only when
adding ingredients and when using the tamper.
8. The tamper fitting your container can only be used when the lid is firmly
locked in place. Use the lid and the tamper that fit your container. Lids and
tampers are not interchangeable between dierent container styles, types
and sizes. If a tamper came with your container, it is the correct tamper for
use with the container.
5
IMPORTANT INSTRUCTIONS
FOR SAFE USE
9. Always start the blender with the variable-speed dial set to 1 and the
High/Low switch in the Low position. To avoid possible burns, never start
on speeds above 1 or with the High/Low Switch in the High position when
blending hot liquids. Always blend hot liquids with the lid and lid plug firmly
in place. Keep hands and other exposed skin away from the lid plug when
blending hot contents.
10. Never touch moving parts. Switch o the appliance and wait until the blades stop
moving before removing the container from the motor base and opening the
container.
11. Switch o the appliance and unplug before changing accessories or approaching
parts that move in use.
12. Do not leave or store foreign objects, such as spoons, forks, knives or the lid plug,
in the container. Starting the blender with a foreign object in the container will
damage the blender and may cause injury.
WARNING
Electrical Shock Hazard.
Always unplug before cleaning the motor
base or when not in use.
Do not put the motor base in water or
other liquid.
Failure to follow instructions can cause
death or electrical shock.
13. Do not operate the blender with a damaged cable or plug. If the supply cable
is damaged, it must be replaced by the manufacturer, their service agent or
similarly qualified persons in order to avoid a hazard.
14. Blades are sharp. To avoid injury, use extreme care when emptying the bowl
and during cleaning.
15. Keep hands and utensils out of the container while blending to reduce the
risk of severe injury to persons or damage to the blender. A rubber scraper or
spatula may be used, but only when the container is removed from the motor
base and the blades are not moving.
16. Do not operate with loose or damaged blades. Do not remove the blade
assembly from the container. Contact your nearest Vitamix authorised service
representative for service or replacement.
17. Do not use outdoors.
18. When making nut butter or oil-based food, do not process for more than one
minute after the mixture starts to circulate in the container. Processing for longer
periods can cause damage to the container and overheating of the motor.
6
IMPORTANT INSTRUCTIONS
FOR SAFE USE
WARNING
Electrical Shock Hazard, Risk of Fire or Injury.
Do not alter or modify any part of the motor base or
container.
Do not use attachments not expressly authorised or sold
byVitamix.
Failure to follow instructions can cause electrical shock,
fire or injury.
SAVE THESE INSTRUCTIONS
NOTICE: FAILURE TO FOLLOW ANY OF THE IMPORTANT SAFEGUARDS AND
IMPORTANT INSTRUCTIONS FOR SAFE USE IS A MISUSE OF YOUR VITAMIX
BLENDER THAT CAN VOID YOUR WARRANTY AND CREATE THE RISK OF
SERIOUS INJURY.
7
PARTS AND FEATURES
Lid Plug
2-Part Lid
Lid Flap
Container
Blade Assembly
Retainer Nut
Centring Pad
Drive Socket
Motor Base
High/Variable Switch
Variable-Speed Dial
On/Off Switch
Control Panel
Feet
Tamper
On/O Switch: Always start the machine with the High/Variable switch in the
Variable ( ) position and the Variable-Speed Dial pointed to 1. Lift the On/O
Switch to the On position (|) to begin blending. Press the switch to the O position
(O) to stop blending.
High/Variable Switch: Variable ( ) allows use of the Variable-Speed Dial.
High ( ) is the fastest speed available.
Variable-Speed Dial: The Variable-Speed Dial selects blade rotation speeds from
1to 10 (low to high).
8
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.