You are about to see how quick, easy
and delicious healthy eating can be!
We hope you will find the information in
this step by step guide to be useful and
beneficial. The possibilities are endless,
and we know you will enjoy your new
Vitamix lifestyle!
Please read all the safety information,
warnings and instructional material
found in this booklet before getting
started. Set your Vitamix® machine on
a dry level surface. Make sure the
power switch is set to “OFF” and plug
into a grounded electrical outlet.Then
follow the cleaning instructions on
page 9to prepare your machine for use.
Always clean your machine before the
first use.
We suggest that you try our recipes
first. We have spent years testing them
for delicious results. Start with the
recipes in this guide. We hope you will
be delighted with the recipes—and
the results.
Finally, use the recipe book as a
guideline to create your own recipes.
Start by substituting “like” ingredients.
Then as you become comfortable with
your machine, you will find endless ways
to create your own nutritious and
delicious meals the Vitamix way.
Record the model number and serial number of this appliance in the spaces provided
below for future reference. These numbers can be found on the back of the motor base.
Model Number ________________________________________________________
Serial Number ________________________________________________________
Date of Purchase ______________________________________________________
Purchased From ______________________________________________________
Before returning this product for any reason, including repair, first contact the Vitamix
Customer Service Department at +1-440-235-4840, service@vitamix.com,
local dealer.
or contact your
PRODUCT REGISTRATION
If you purchased your Vitamix® machine directly from the Vita-Mix® Corporation via the
company’s website or call center by phone, your product was registered at the time of
purchase and your Vitamix machine’s Warranty has been activated.
If you purchased your Vitamix machine from an International Distributor or Dealer in
countries other than the United States, Canada, United Kingdom or Ireland, your product
is warranted through the International Distributor or Dealer and need not be registered
with the Vita-Mix Corporation.
Your machine is not yet registered with Vitamix if you:
1. Purchased from a Dealer in the United States, Canada, United Kingdom or Ireland
2. Purchased from a military base
3. Purchased from a retail or wholesale store
4. Received your Vitamix machine as a gift
5. Are not the original owner of the machine
Enjoy faster and easier service in the future by taking a few minutes to register your
Vitamix machine today.
Choose one of these easy ways to register your machine:
1. Online at www.vitamix.com/warranty
2. Email service@vitamix.com
3. Complete and mail the enclosed product registration card (USA and Canada only)
4. Call +1-440-235-4840, press option 2
Your warranty may be honored by Vita-Mix® Corporation or an authorized dealer.
Failure to register your machine will not diminish your warranty rights.
54
english
IMPORTANT SAFEGUARDS
WARNING: To avoid the risk of serious injury when
using your Vitamix® Blender, basic safety precautions should
be followed including the following.
READ ALL INSTRUCTIONS, SAFEGUARDS AND WARNINGS BEFORE
OPERATING BLENDER.
1. Read all instructions.
2. Not intended for use by or near children or persons with reduced physical, sensory,
or mental capabilities or lack of experience and knowledge. Close supervision is
necessary when any appliance is used by or near children or incapacitated persons.
3. To protect against risk of electrical shock do not put blender base in water or other liquid.
4. Unplug from outlet when not in use, before putting on or taking o parts, and
before cleaning.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, or is dropped or damaged in any manner. Call Vitamix Customer
Service +1-440-235-4840 or 800-848-2649 or email service@vitamix.com at once
for examination, repair, replacement, or electrical or mechanical adjustment. If
purchased outside the U.S.A. or Canada, contact your local Vitamix dealer.
7. Alteration or modification of any part of the blender base or container including the
use of any part or parts that are not genuine authorized Vitamix parts may cause
fire, electric shock or injury.
8. The use of attachments not expressly authorized or sold by Vitamix for use with this
blender, including canning jars, may cause fire, electric shock or injury.
9. Do not use outdoors.
10. Do not let cord hang over edge of table or counter.
11. Do not let cord contact hot surface, including the stove.
12. Keep hands and utensils out of container while blending to reduce the risk of severe
injury to persons or damage to the blender. A rubber scraper or spatula may be
used but only when the Vitamix blender is not running.
13. The tamper provided must be used only when the main part of the lid is in place.
14. Blades are sharp. Handle or remove blade and blade assembly from the container
with extreme care to avoid injury. To reduce the risk of injury, never place a blade
assembly on the motor base unless assembled to the Vitamix container.
15. Do not leave foreign objects in container such as spoons, forks, knives or the lid
plug as this will damage the blades and other components when starting the
machine and may cause injury.
16. Never attempt to operate with damaged blades.
6
IMPORTANT SAFEGUARDS
17. Always operate blender with lid and lid plug firmly in place. The lid plug should only
be removed when adding ingredients and when using the tamper.
18. When blending hot liquids or ingredients use caution, spray or escaping steam may
cause scalding and burns. Do not fill container to the maximum capacity. Always
begin processing on the lowest speed setting - Variable speed 1. Keep hands and
other exposed skin away from the lid opening to prevent possible burns.
19. When making nut butters or oil based foods, do not process for more than one
minute after the mixture starts to circulate in the container. Processing for longer
periods can cause dangerous overheating.
SAVE THESE INSTRUCTIONS
WARNING
To Avoid Injury.
Read and understand instruction manual
before servicing this machine.
IMPORTANT INSTRUCTIONS FOR SAFE USE
This product is intended for HOUSEHOLD USE ONLY and is not intended to be used for
commercial purposes.
Do not leave your Vitamix® Blender unattended when operating.
Any repair, servicing or the replacement of parts, must be performed by Vitamix or an
authorized service representative.
WARNING
Electrical Shock Hazard.
Use grounded outlet only.
DO NOT remove ground.
DO NOT use an adapter.
DO NOT use an extension cord.
Failure to follow instructions can cause death
or electrical shock.
NOTICE: FAILURE TO FOLLOW ANY OF THE IMPORTANT SAFEGUARDS AND THE
IMPORTANT INSTRUCTIONS FOR SAFE USE IS A MISUSE OF YOUR VITAMIX BLENDER
THAT CAN VOID YOUR WARRANTY AND CREATE THE RISK OF SERIOUS INJURY.
76
english
PARTS AND FEATURES
2-Part Lid: Your new machine
has our latest lid design. It is
easy to put on and take o, and
easy to clean. Always use the
lid and the lid plug when the
machine is in operation.
CAUTION: Lids are not
inter-changeable between
dierent container styles,
types and sizes.
New lids should not be forced
into place. For ease in using
a new lid, lightly coat the rim
and seal below the rim with
vegetable oil. Wipe away
excess. Snap the lid onto the
container and leave in place
for a few minutes. Once the lid
has been left on the container
it will be much easier to lock or
remove, and will not require the
use of vegetable oil.
Lid Plug: Insert through the
lid and secure by turning
clockwise. Remove the lid
plug to use the tamper or add
ingredients.
To Lock the Lid in Place:
1. Position lid on container
with lid flaps midway
between the spout and the
handle.
2. Push the lid onto the
container until it locks in
place.
3. The lid must always be
secured when processing, especially hot liquids that
may scald.
Lid Plug
2-Part Lid
Lid Flaps
Container
Blade
Assembly
Retainer Nut
Centering Pad
Drive Socket
Control Panel
Motor Base
Feet
Tamper
8
PARTS AND FEATURES
WARNING
Rotating Blades Can
Cause Severe Injury.
DO NOT reach into container
while machine is running.
WARNING: Never put hands, spatulas, etc. in the container while the machine
is running or while the container is still on the base.
To Remove the Lid: Lift up on one lid flap while holding the container securely.
To Remove the Lid Plug: Rotate the lid plug counterclockwise from the “locked”
to “unlocked” position and lift out.
Container: Ounces, cups and milliliters are clearly marked. A second dry blade
container is available for purchase to grind grain and knead bread dough. The blade is
marked “D”. Grinding grains will cloud the lower three inches (8 cm) of the container.
Automatic Overload Protection: Your Vitamix® motor is designed to protect itself
from overheating. If the motor shuts off, follow these instructions:
• 120 Volt machines: Turn the power switch off for up to 45 minutes to reset.
Reset time will be extended if high room temperatures exist. To reduce the
reset time, unplug the machine, remove the container and blow air into the
center section of the bottom with a hair dryer on the cool setting.
• 220 Volt machines: 220/240 motors are equipped with a reset button. If the
motor shuts off, press the black reset button on the bottom of the machine.
Power Cord: Your machine is equipped with
Front
a long power cord. Store the unused portion
neatly underneath.
Bottom View / Cord Wrap: Plastic cord
retainers hold the cord securely. There
is no need to unscrew the cord retainers
to let out more cord. They are flexible,
and return to position after the cord is
lifted out.
Back
Reset Button:
On 220/240 volt machines only.
98
english
ABOUT THE BLADES
The Vitamix® machine comes standard with the wet blade container. The blade is identified
by a “W” for wet. This blade is used for most of your recipes. Additional containers with
wet or dry blades may be purchased separately.
WARNING
Rotating Blades Can
Cause Severe Injury.
DO NOT reach into container
while machine is running.
Wet Blade Container: Designed for processing liquids including
juice, frozen mixtures, sauces, soups, purees, batters, and for
wet chopping. The wet blades can also grind grain and knead
dough, but they are not quite as efficient as the dry blades in
this application. If used for grinding, your container will mar and
become cloudy; see instructions for dry container use.
Dry Blade Container: These blades are clearly marked “D” and
are designed specifically for grinding dry materials such as grains,
cereal and coffee and are also used for kneading bread dough. The
dry blades can NOT process liquids efficiently.
on a regular basis, you may wish to purchase a separate dry
blade container and replace blades as needed.
If you grind herbs
10
HOW TO USE THE TAMPER
The tamper allows you to accelerate the process of very thick and/or frozen
mixtures that cannot be processed in a regular blender. Using the tamper maintains
circulation by preventing air pockets from forming. While the machine is running, and
only through the lid plug opening, use the tamper to press ingredients into the blades
as you make frozen ice creams and nut butters, or purée fruits and vegetables.
WARNING
Rotating Blades Can
Cause Severe Injury.
DO NOT reach into container
while machine is running.
• The splash disk (near the top of the tamper) and lid prevent
the tamper from hitting the blades when the lid is
secured properly in the locked position.
• The container should not be more than 2/3 full when
the tamper is used during blending.
• Do not use the tamper for more than 30 consecutive
seconds (to avoid overheating).
• If the food does not circulate, the machine may have
trapped an air bubble. Carefully remove the lid plug
while making sure the lid stays firmly in place. Release
the air bubble by inserting the tamper through the lid
plug opening.
• Holding the tamper straight down may not always help
the ingredients circulate. If need be, point the tamper
toward the side or corner of the container.
english
1110
CONTROL PANEL
3
1. On/Off Switch (l)/(O): Push up to turn On. Push down to turn Off.
2. High/Variable Switch
Variable to activate all of the lower variable speeds.
Always make sure that the High/Variable switch is set to Variable before pushing
the On/Off switch to the On position. Do not start your machine on High speed.
3. Variable Speed Dial: Selects many speed settings. It is active only when the High/Variable switch is set in the Variable position.
( )/()
CAUTION
: High is the fastest speed available. Switch to
12
Never Start On High Speed With Hot
Liquids to Avoid Possible Burns.
Use caution; escaping steam or
splashes may scald.
Lock the lid. This will prevent
expansion from blowing it o when
the machine is turned on.
Start on Variable 1, slowly increase
to 10, then switch to High speed.
12
HINTS FOR SETTING SPEEDS
Always start the machine with the left switch down in the Variable ( ) position and
with the center Variable Speed Dial on 1. Slowly turn the Variable Speed Dial to the
desired speed depending on the recipe used. If a recipe calls for processing on High
( ), slowly rotate the Variable Speed Dial to 10 and then push the High/Variable
( )/( ) Switch up into the High ( ) position. Do not begin processing on Variable 10
or directly on the High ( ) setting.
Use High ( ) speed as much as possible to make whole food juices, soups, shakes,
frozen mixtures, purées, nut butters and for grinding grains. Processing times will
generally be less than one minute (most take less than 30 seconds). High ( ) speed
provides the best quality of refinement, breaking down ice, frozen fruit, whole fruits or
vegetables, and grains to a smooth lump-free consistency.
Use the Variable Speed Dial to start the blending process. This is always important but
is especially important when starting thick mixtures, hot mixtures, stirring, chopping,
grinding meat, and preparing single servings. It is also used to provide slower and more
controlled blending for short periods of time.
TIP: Blending too long at too low a speed setting will overheat the machine and cause
the Automatic Overload Protection to turn the machine off. Use the High ( ) speed as
often as possible to achieve the most uniform consistency. Blending on High ( ) speed
also maximizes the motor’s cooling fan to avoid overheating.
When on the highest speed, if the food does not circulate, the machine may be
overloaded or may have trapped an air bubble. Carefully remove the lid plug while
making sure the lid stays firmly in place. Release the air bubble by inserting the
tamper through the lid plug opening. If circulation problems continue, reduce the
machine speed. A lower speed may allow food to circulate when a higher speed
does not. Once the food is circulating freely, increase the speed back to High ( )
and continue processing.
english
1312
OPERATING INSTRUCTIONS
WET BLADE CONTAINER
Designed for processing liquids including juice, frozen mixtures, sauces, soups, purees,
batters, and for wet chopping.
1. Make sure that the Variable speed is set to 1.
2. Load the container before placing it on the motor base. Place liquids and soft foods
in the container first, solid items and ice last. Although not necessary for blending,
you may want to cut or break food into smaller pieces for more precise measuring
of ingredients.
3. Securely fasten the 2-part lid. Always use the complete 2-part lid when blending
(unless the tamper is inserted through the lid plug opening). Especially when
blending hot ingredients, make sure the lid is securely latched.
4. With the motor o, set the wet blade container on the motor base by aligning it
over the centering pad. Do not ever attempt to put a container on an operating
motor base or to operate a motor base without a container properly in place.
5. Start with the High/Variable ( )/( ) Switch in the Variable ( ) position. Always
start your machine on Variable 1. Activate the machine by turning the On/O (|)/(O)
switch to On (|) then slowly increase to the desired speed. Your container will shift
and get into an aligned position.
6. Take proper care when handling and processing hot ingredients and making hot soups and sauces.
CAUTION
7. Due to the machine’s speed, processing times are much quicker than standard
appliances. Until you are accustomed to the machine, count your time carefully to
avoid over processing.
8. After turning the machine o, wait until the blades completely stop before removing
the lid or container from the motor base.
Never Start On High Speed With Hot
Liquids to Avoid Possible Burns.
Use caution; escaping steam or
splashes may scald.
Lock the lid. This will prevent
expansion from blowing it o when
the machine is turned on.
Start on Variable 1, slowly increase
to 10, then switch to High speed.
14
OPERATING INSTRUCTIONS
DRY BLADE CONTAINER
If purchased, your dry blade container should only be used for hard, dry materials such
as grain and for kneading dough.
1. Make sure that the Variable speed is set to 1.
2. Securely fasten the 2-part lid. Always use the complete 2-part lid when blending
(unless the tamper is inserted through the lid plug opening). Especially when
blending hot ingredients, make sure the lid is securely latched.
3. With the motor o, set the dry blade container on the motor base by aligning it over
the centering pad. Do not ever attempt to put a container on an operating motor
base or to operate a motor base without a container properly in place.
4. Start with the High/Variable ( )/( ) Switch in the Variable ( ) position. Always start your machine on Variable 1. Activate the machine by turning the On/O (|)/(O)
switch to On (|) then slowly increase to the desired speed. Your container will shift
and get into an aligned position.
5. After turning the machine o, wait until the blades completely stop before removing
the lid or container from the motor base.
6. Due to the machine’s speed, and the sometimes short processing times, count your
time carefully to avoid over processing.
7. Grinding dry material for more than 2 minutes could damage your machine. Regular
use may result in cosmetic marring of the container and cause the blades to become
dull over time.
8.
Grinding some herbs may release volatile oils, causing the container to discolor
permanently. Others have strong odors that may linger in the container, affecting
the flavor of other foods. The grinding of some herbs and spices may also cause
the blade to dull over time, or the container to crack.
english
1514
CARE AND CLEANING
CONTAINER
To prepare your new machine for initial use, follow the steps under
Normal Cleaning below. This will clean the unit, and break-in the motor.
Normal Cleaning:
1. Fill the container half full with warm water and add a couple drops of liquid
dish washing detergent to the container.
2. Snap or push the complete 2-part lid into locked position.
3. Select Variable 1. Turn machine on and slowly increase speed to Variable 10,
then to High.
4. Run the machine on High speed for 30 to 60 seconds.
5. Turn the machine off, rinse and drain the container.
To Sanitize:
1. Follow Normal Cleaning Instructions above.
2. Fill the container half full with water and 1 1/2 teaspoons liquid bleach.
3. Snap or push the complete 2-part lid into locked position.
4. Select Variable 1. Turn machine on and slowly increase speed to Variable 10,
then to High.
5. Run the machine on High speed for 30 to 60 seconds.
6. Turn machine off, and allow mixture to stand in the container for an additional
1 1/2 minutes.
7. Pour bleach mixture out. Allow container to air dry.
8. Do not rinse after sanitizing.
LID AND LID PLUG
Separate the lid and lid plug. Wash in warm soapy water. Rinse clean under running
water, and dry. Reassemble before use.
IMPORTANT: To ensure continued and effective performance, do not put the container,
lid or lid plug in the dishwasher.
16
Loading...
+ 36 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.