Vista VFS24/32HDIP User Manual

VFS24/32HDIP

Public Display IP Monitor

User Manual

2

VFS-24_32HDIP user manual V1.0

3

VFS-24_32HDIP user manual V1.0

Contents

Before You Begin ................................................................................................4

Side Panel Control buttons ..................................................................................6

Connections ........................................................................................................7

OSD Function ......................................................................................................7

LCD monitor Mounting Guide ..............................................................................9

Getting started ................................................................................................... 10

Power up ........................................................................................................... 10

Power Down ...................................................................................................... 10

Logging into the Monitor .................................................................................... 11

Setting the language and IP address via Wizard ............................................... 11

Setting language ............................................................................................... 12

Setting the Monitor IP Address .......................................................................... 12

Main Menu settings description ......................................................................... 17

Device – Device Info ......................................................................................... 17

Device – System Version .................................................................................. 18

Device - PTZ Settings ...................................................................................... 18

Devise DST settings .......................................................................................... 18

Channel ............................................................................................................. 18

Network ............................................................................................................. 18

4

VFS-24_32HDIP user manual V1.0

Before You Begin

Read these instructions before installing or operating this product.
Note: This installation should be made by a qualified service person and should conform to local codes.

This manual provides installation and operation information. To use this document, you must have the following minimum qualifications:

 A basic knowledge of CCTV systems and components
 A basic knowledge of electrical wiring and low-voltage electrical connections

Intended use

Only use this product for its designated purpose; refer to the product specification and user documentation.

Customer Support

For assistance in installing, operating, maintaining and troubleshooting this product refer to this document and any other documentation
provided. If you still have questions, please contact Norbain Technical Support and Sales:

Vista, 210 Wharfedale Road, IQ Winnersh, Wokingham, Berkshire RG41 5TP, England.
UK [phone]

Note: You should be at the equipment and ready with details before calling Technical Support.

Conventions Used in this Manual
Boldface or button icons highlight command entries. The following WARNING, CAUTION and Note statements identify potential

hazards that can occur if the equipment is not handled properly:

* WARNING:

Improper use of this equipment can cause severe bodily injury or equipment damage.

** Caution:

Improper use of this equipment can cause equipment damage.

Note: Notes contain important information about a product or procedure.

This apparatus is manufactured to comply with the radio interference.
A Declaration of Conformity in accordance with the following EU standards has been made. The manufacturer declares
that the product supplied with this document is compliant the provisions of the EMC Directive 2004/108/EC, the CE
Marking Directive 93/68 EEC and all associated amendments.

All lead-free products offered by the company comply with the requirements of the European law on the Restriction of
Hazardous Substances (RoHS) directive: 2011/65/EU, which means our manufacture processes and products are
strictly “lead-free” and without the hazardous substances cited in the directive.

The crossed-out wheeled bin mark symbolizes that within the European Union the product must be collected
separately at the product end-of-life. This applies to your product and any peripherals marked with this symbol. Do
not dispose of these products as unsorted municipal waste.

* This symbol indicates electrical warnings and cautions.
** This symbol indicates general warnings and cautions.

NORBAIN SD LTD reserves the right to make changes to the product and specification of the product from time to time without prior
notice.

5

VFS-24_32HDIP user manual V1.0

WARNINGS AND CAUTIONS:

To reduce the risk of fire or electric shock, do not insert any metallic objects through the ventilation grills or other openings on the
equipment.

WARNING

This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required
to take adequate measures.

Package List

A. LCD IP Monitor x 1
B. Power Cord x 1
C. User Manual x 1
D. 12V Power Adapter x 1
E. USB Mouse x 1

CAUTION

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

6

VFS-24_32HDIP user manual V1.0

Side Panel Control buttons

Control buttons on side of monitor

1. Power

Push to turn on and turn off the unit.
LED Green light: Power on
LED Red light: Standby mode.

2/3. Adjust UP /DOWN
UP: Used as UP function. Or Increase value on the OSD Menu.
And as a hot key for color adjust function.

DOWN: Used as DOWN function. Or Decrease value on the OSD Menu.

And as a hot key for auto adjust function.

4. Item:

Hot key for OSD adjustments of Volume , Contrast, Brightness,
, and Red, Green, Blue.

5. Menu

Push to call out OSD menu. Or Used as Confirm function in OSD Menu.

6. Source

Select input signal from D-SUB, HD,DVI ,and IP.

KEY Lock Function:

Push “Menu” and “Item” , OSD of screen will show “Key Lock on”, Into key lock mode.

And push again , OSD of screen will show “Key Lock off “, Into key unlock mode.