Vista VFS-200LED Installation And User Instructions Manual

VFS- 200LED range Installation and user

Installation and user instructions for:

VFS-200LED Range of flat screen monitors

2

3

TABLE OF CONTENTS

 CE information ------------------------------------------------------------------------ 4

 Safety Precautions ------------------------------------------------------------------- 4

1. Scope -------------------------------------------------------------------------------------- 6

2. Functional specification ------------------------------------------------------------- 6

3. Controls and indicators -------------------------------------------------------------- 8

4. OSD Menu ------------------------------------------------------------------------------- 9

5. Regulatory Agency ------------------------------------------------------------------- 20

6. Reliability ------------------------------------------------------------------------------ 20

7. Mechanical ------------------------------------------------------------------------------ 21

4

CE INFORMATION

The product must be installed according to the currently valid installation regulations
for EMC to guarantee the designed use and to prevent EMC problems.
The device supplied with this manual is according to the EC, EMC Directive,
2004/108/EC , LVD 2006/95/EC and RoHS 201165/EU.

SAFETY PRECAUTIONS

1. Do not modify the three-prong grounding type monitor power plug in any way.

2. Operate this unit only from the type of power source indicated on the label.

3. Do not block or cover ventilation openings on the back or bottom of the monitor
cabinet.

4. Do not place this monitor near a radiator or heating vent.

5. Do not push objects of any kind through cabinet openings. This may result in fire or
electrical shock.

6. Before adding attachments always ask a service technician to perform routine safety
tests to determine that equipment is in safe operating condition. Ground potential tests
should be part of the routine safety check made by the service technician.

7. Do not place monitor on an unstable cart, stand, or shelf where it may fall and injure
personnel or damage equipment.

8. Route power cords so that they cannot be walked upon or tripped over. Do not allow
anything to rest on the power cord.

9. Do not install monitor in wet areas, or where it may be exposed to rain or water. Do not
spill liquid of any kind on the unit.

10. Unplug the power cord from the unit before cleaning the display. Use only a damp cloth.
Do not use alcohol, spirits, or ammonia to clean the display. DO NOT ATTEMPT TO

CLEAN THE INTERIOR OF THIS UNIT- THIS ACTION MUST BE PERFORMED BY
THE SERVICE TECHNICIAN AS REQUIRED DURING NORMAL MAINTENANCE.

11. Refer all servicing to qualified service personnel. REMOVAL OF BACK COVER BY
UNAUTHORIZED PERSONNEL MAY EXPOSE THE USER TO DANGEROUS
VOLTAGES OR OTHER HAZARDS.

12. Unplug the unit immediately and notify the service technician.
A. If liquid has been spilled into the display or the display has been exposed to rain or

water.
B. If the unit has been dropped or the cabinet damaged.
C. If fuses continue to blow.
D. If the power cord is damaged or frayed.
E. If a distinct change from normal operation is apparent.

5

When replacement parts are required, be sure that the service technician uses
components specified by the manufacturer which have the same characteristics as the
original parts. UNAUTHORIZED SUBSTITUTIONS MAY RESULT IN FIRE, ELECTRICAL
SHOCK OR OTHER HAZARDS.

Upon completion of any service or repairs, ask the technician to perform safety checks to
determine that the equipment is in safe operating condition.

WARNING:

SERIOUS SHOCK HAZARDS EXIST WITHIN THE COVERS OF THIS MONITOR. DO
NOT OPEN THE COVERS UNDER ANY CIRCUMSTANCES,

THERE ARE NO USER SERVICEABLE COMPONENTS INSIDE
CAUTION - USE RECOMMENDED MOUNTING APPARATUS TO AVOID RISK OF

INJURY

6

1. Scope

This specification is used to define the performance of VFS series color TFT LCD
(LED Backlit) monitors. This system supports both video input and PC inputs. In video
input mode, the system can automatically detect PAL or NTSC signals. In PC mode, this
system can support up to 1920 x 1080 (VFS-221W) VESA standard.

This system provides frame buffer style de-interlace mechanism and 3D comb filter to
implement the high quality video pictures. The user friendly OSD menu is also provided to
make this system easy to operate.

2. Functional Specifications

2.1 Power Supply

The power supply spec is listed below,
AC INPUT

* AC power input range: 100 – 240 V, 50-60Hz, 1.8Amps max.
* Power efficiency: ≥80%

DC INPUT

* DC JACK power input: 12V +/-10% 3A max.

2.2 Video Characteristics

Composite Video (CVBS): 1.0 Vp-p (0.5 – 1.5Vpp), Automatic switching from 75

unbalanced termination to Hi-Z with loop-through operation.

Y/C (S-video): 1.0 Vp-p (0.5 – 1.5Vpp), Automatic switching from 75 unbalanced

termination to Hi-Z with loop-through operation.

2.3 VGA Input

Analog RGB: 0.707 Vrms.
Support VESA Standard Timing

2.4 HDMI Input

HDMI 1.3 Compatible Interface
HDMI Timing Modes
480i / 480p
576i / 576p

7

720p
1080i / 1080p (VFS-221W)

2.5 Audio Input

Signal Level: 1.0 Vrms

2.6 Environmental
 Temperature
Operating: 00C to +400C
Storage: -200C to +600C
 Humidity
Operating: 10% to 85% (non-condensing)
Storage: 10% to 95% (non-condensing)

2.7 EDID

This series of displays support EDID, but does not support DDC2B function.

2.8 Connectors

VIDEO
A/B AUDIO: Stereo Phone Jack x2, OUT x1, IN x1
C/D CVBS 1: BNC x2, OUT x1, IN x1
E/F CVBS 2: BNC x2, OUT x1, IN x1
G S-VIDEO (Y/C): Mini-DIN 4 pins, input only
H VGA: D-SUB 15 pins connector
POWER

I HDMI: HDMI connector

PC
J DC JACK: DC12V in, 5.5Ø / 2.5Ø

Set up sequence:

1. Make sure the power to the Video source or PC is turned off.

2. Plug the power adapter, Video signal and VGA cable to monitor.

3. Turns the PC and/or Video source power on.

4. Plug the AC power cord onto power adapter.