Vista VFD4V9Me, VFD4V9MWe, VFD4V9Ce, VFD4V9CWe Installation Instructions Manual

Read these instructions first!

Vista Varifocal Dome Cameras

Installation Instructions

VFD4V9M Series 1/3 Monochrome Fixed Domes

VFD4V9C Series 1/3 Colour Fixed Domes

2

Vista Varifocal Dome Cameras Installation Instructions

INTRODUCTION

These instructions cover Vista Varifocal Dome cameras. Read all of these instructions. Use
them to install your camera and have them available for its lifetime. If you have any problems,
contact your agent.

3

Installation Instructions Vista Varifocal Dome Cameras

PRODUCT SAFETY

 Installation and servicing is only to be carried out by suitably qualified and

experienced personnel.

 Do not attempt to disassemble the camera. To prevent electric shock, do not

remove screws or the cover. There are no user-serviceable parts inside. Refer
servicing to qualified service personnel.

 Handle the camera with care. Do not abuse the camera. Avoid striking or shaking

it. Improper handling or storage could damage the camera.

 Do not expose the camera to rain or moisture, or try to operate in wet areas.

Take immediate action if ever the camera does become wet. Turn the power off
and refer servicing to qualified service personnel. Moisture can damage the
camera and also create the danger of electric shock.

 Never face the camera towards the sun. Irrespective of whether the camera is

in use or not, it should never face towards the sun. Use cautiously when operating
the camera in the vicinity of spotlights or other bright lights and light reflecting
objects.

 All dome cameras must be powered from a Class 2 power supply unit.

 Do not operate the camera beyond its temperature, humidity or power ratings.

 Do not use the camera in extreme environments such as high temperature or

humidity.

 Do not touch the CCD sensor directly with your fingers. If necessary, use a soft

cloth moistened with alcohol to wipe off any dust.

The Vista Varifocal Dome range is designed for use in general purpose internal CCTV applications
and has no other purpose. Only operate your camera between the temperatures of -10

O

C and
+50OC. Do not operate your camera outside its specified power supply range. Vista Varifocal
Dome cameras must only be used in clean, dry, dust-free environments unless housed in a
suitable protective housing to IP65 or better.

ELECTROMAGNETIC COMPATIBILITY (EMC)

This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.

This product is intended solely for use in general CCTV applications.

The product must be installed and maintained in accordance with good installation practice
to enable the product to function as intended and to prevent problems. Refer to your agent for
installation guidance.