Vista Sunstar Basic Operation Manual

DVD PLAYER

-If Equipped

The DVD player video output is
connected to the lounge TV and plays
through the TV stereo speakers or the
deluxe sound rear radio speakers in the
lounge area of the coach.

Set TV Sound Output

• Use the TV Menu button to set TV

audio output to Variable Audio
Output. (See TV owner’s manual for
instructions.) This will connect TV
stereo sound output to the deluxe
speakers in the lounge area.

• Volume is adjusted with the TV

remote or volume buttons.

Set TV Video Input

• Turn TV and DVD player On.

• Press the SOURCE button on the TV

or TV remote to select “INPUT 1.”

• The TV screen will display the DVD

player logo when the correct input is
selected.

Play DVD

• Insert DVD into player. DVD will
begin to load automatically. TV
screen will typically show
“READING” or LOADING”.

• The DVD may load directly to the
main title/menu screen or it may
begin to play previews. You may be
able to skip previews if desired by
pressing the NEXT button until you
see the main menu screen.

• When the main menu screen appears,
use the arrow buttons on the DVD
remote to select the desired entry or
press the ENTER or PLAY buttons on
the remote (or “Play” button on DVD
player) to begin playing the feature.

• Volume is adjusted with the DVD
remote (or volume buttons on DVD
player).

Further Information

For further information and operating
instructions, see the manufacturer’s
information included in your InfoCase.

ENTER

NEXT

ENTER

T/F

ENTER

PLAY/PAUSE

Continued—

Audio-Video System

Basic Operation

Guide

Part No. 161501-14-011

Rev. 1401130225

Copyright 2013 Winnebago Industries, Inc.

All rights reserved.

NOTE: See your InfoCase for specific

operating guides for audio and
video components.