Visonic RDR-PXTUSB User Manual

RDR-PXT (USB)

Reader For Proximity Key Enrollment

1. INTRODUCTION

The RDR-PXT is a proximity reader designed for batch
enrollment of proximity keys in the PC. It allows easy
inclusion of non-contact ID key reading into AXSalert
software. The reader transmits the key data 4 times

2. TECHNICAL SPECIFICATIONS

Technology: RF/ID (Passive RF transponder)
Frequency: 125 kHz
ID codes: 10
Read range: 40-60 mm (2 - 3 in.)
Reading time: 100 ms
Size (H x W x H): 115 x 73 x 29 mm (4-1/5 x 2-7/8 x 1-1/8 in)
Weight: 120 gr (4.2 oz)
Cable length: 1.5 m (5 ft)
Connector: USB
Interface to host: USB
Current drain: 30mA
Temperature range: 0°C - 50°C (32°F - 130°F) - indoor use only

Attention: Do not connect the RDR-PXT before installing the software

(every 100 ms) when key is presented to reader. Key
data is accompanied by checksum error detection code
for higher reliability. The RDR-PXT connects to the PC
using a USB port.

12

unique combinations (1 trillion)

Installation Instructions

3 . INSTALL THE SOFTWARE

Insert the AXSalert CD in to the CD-ROM drive; wait a few seconds. The installation setup will start automatically.
If the setup does npot start automatically, click Start and select Run. In the field that appears, enter D:\Install.exe

(where D is the letter of your CR-ROM drive).
Follow the instructions that appear on the PC screen.
After installation is completed, connect the RDR-PXT to a USB port on your computer.

3. START THE SOFTWARE

Double click on the AXSalert icon on the desktop

A prompt will appear to insert username and password. Type "admin" (password is not needed) in the user name
field and click on "Login" button.

DE6329 1

4. ENROLL NEW CARDS (USERS)

Press on the "users" button:

Users.ico

On the "Users" screen select the "+" sign. The "User Properties" screen will appear:

• Present the Tag / Cards to the RDR-PXT, the "PIN Code" field will change to a four figure number, if
it doesn’t, retry.

• Type the "First name / Last name" of the cardholder

• Select "OK"

• The cardholder can now use his Tag / Card.

NOTE: To enroll another Tag / Card, repeat the above steps.

WARRANTY

Visonic Technologies Ltd. and/or its subsidiaries and its affiliates (“the Manufacturer”)
warrants its products hereinafter referred to as “the Product” or “Products” to be in
conformance with its own plans and specifications and to be free of defects in materials
and workmanship under normal use and service for a period of twelve months from the
date of shipment by the Manufacturer. The Manufacturer’s obligations shall be limited
within the warranty period, at its option, to repair or replace the product or any part
thereof. The Manufacturer shall not be responsible for dismantling and/or reinstallation
charges. To exercise the warranty the product must be returned to the Manufacturer
freight prepaid and insured.

This warranty does not apply in the following cases: improper installation, misuse,
failure to follow installation and operating instructions, alteration, abuse, accident or
tampering, and repair by anyone other than the Manufacturer.

This warranty is exclusive and expressly in lieu of all other warranties, obligations or
liabilities, whether written, oral, express or implied, including any warranty of
merchantability or fitness for a particular purpose, or otherwise. In no case shall the
Manufacturer be liable to anyone for any consequential or incidental damages for breach
of this warranty or any other warranties whatsoever, as aforesaid.

This warranty shall not be modified, varied or extended, and the Manufacturer does not
authorize any person to act on its behalf in the modification, variation or extension of this
warranty. This warranty shall apply to the Product only. All products, accessories or
attachments of others used in conjunction with the Product, including batteries, shall be
covered solely by their own warranty, if any. The Manufacturer shall not be liable for any
damage or loss whatsoever, whether directly, indirectly, incidentally, consequentially or
otherwise, caused by the malfunction of the Product due to products, accessories, or
attachments of others, including batteries, used in conjunction with the Products.

The Manufacturer does not represent that its Product may not be compromised and/or
circumvented, or that the Product will prevent any death, personal and/or bodily injury
and/or damage to property resulting from burglary, robbery, fire or otherwise, or that the
Product will in all cases provide adequate warning or protection. User understands that a
properly installed and maintained alarm may only reduce the risk of events such as
burglary, robbery, and fire without warning, but it is not insurance or a guarantee that
such will not occur or that there will be no death, personal damage and/or damage to
property as a result.

The Manufacturer shall have no liability for any death, personal and/or bodily
injury and/or damage to property or other loss whether direct, indirect, incidental,
consequential or otherwise, based on a claim that the Product failed to function.

However, if the Manufacturer is held liable, whether directly or indirectly, for any loss or
damage arising under this limited warranty or otherwise, regardless of cause or origin,
the Manufacturer’s maximum liability shall not in any case exceed the purchase price of
the Product, which shall be fixed as liquidated damages and not as a penalty, and shall
be the complete and exclusive remedy against the Manufacturer.

Warning: The user should follow the installation and operation instructions and among
other things test the Product and the whole system at least once a week. For various
reasons, including, but not limited to, changes in environmental conditions, electric or
electronic disruptions and tampering, the Product may not perform as expected. The
user is advised to take all necessary precautions for his /her safety and the protection of
his/her property.

6/91

VISONIC TECHNOLOGIES. (ISRAEL): 30 Habarzel St. Tel Aviv 69710 ISRAEL Tel [phone] Fax: [phone] E-MAIL: [e-mail]
VTA (VISONIC TECHNOLOGIES AMERICAS): 65 West Dudley town Road, Bloomfield CT. 06002-1911 USA. TEL.: [phone]

FAX: [phone]. E-MAIL: [e-mail]

VT UK (VISONIC TECHNOLOGIES UK): Fraser Road, Priory Business Park, Bedford MK44 3WH ENGLAND. TEL.: [phone]; FAX: [phone]
INTERNET:

VISONIC TECHNOLOGIES LTD. 2004 RDR-PXT (USB) DE6329-0 (REV. 1, 03/04)

www.visonictech.com

2 DE6329