Visonic RDR-1B User Manual

5'5

)

(

)

External Proximity Reader

,QWURGXFWLRQ

The RDR-1 is an External Proximity Reader, compati ble with the
Tag-in-a-Bag (TIAB) access control system. The system is
designed to limit access to restricted areas, while permitting
authorized people to enter. The integrati on of the exter nal reader
in the TIAB system is shown in figure 1.

External reader

Personal

tag

Personal

tag

TIAB control unit

Open

door

Figure 1 - Integration of External Reader in TIAB System

63(&,),&$7,216

Indicators: Tri-color LED (green, red, amber).
Tag reading range: 50 - 100 mm ( 2 -4 in.)
Internal tag reader frequency: 125 kHz.
Tag code possibilities: 10
Dimensions (L x W x D): 116 x 70 x 16.8 mm (2 3/4 x 4 1/2 x 5/8

in.)

Weight: 121.5 g (4.3 oz)
Color: Dark gray

12

possible combinations.

Installation Instructions

The TIAB has an internal proximity
tag reader. For installations in
which an additional tag reader is
required, the external reader
RDR-1 (figure 2) can be used.

The external reader is connec ted t o
the TIAB control unit by 4
color-coded wires.

When present ing a personal tag to
the external reader, the tag
transmits a coded RF signal back
to the reader and the reader
communicates the rec eived data t o
the TIAB..

It is recommended to install it on a wall outside the protected
area, and the TIAB contr ol unit inside the protected area.

For information about t he TIAB system, refer to the TIAB user’s
guide and installation instructions documents.

RDR-1 to TIAB control unit maximum cable lengt h: 10 m (32
ft.)

Minimum distance between TIAB control uni t and the RDR-1:

61 cm (2 ft.)
Compliance with standards: Complies with Part 15 of the FCC

Rules and RSS-210 of Industry and Scienc e Canada. Operation
is subject to the following two c onditions : (1) Thi s device may not
cause harmful int erference, and (2) thi s device must accept any
interference received, including interference that may cause
undesired operation.

Figure 2. RDR-1 External

Reader

02817,1*

CAUTION: The distance between the TIAB cont rol unit and the
RDR-1 should be at least 61 cm (2 ft.), to ensure proper
operation.

A . Insert a screwdriver, into the r ecess at the bottom or top of

the case (see figure 3), and separate the cover from the
reader.

:,5,1*

The external reader has an integral color-coded, 4-wire cable.
Connect the wires to t he ter mi nal s tr i p of t he TIAB c ontr ol uni t, as
shown in figure 4.

External
reader
cover

Screw
hole

Figure 3 - Separating the External Reader Cover

B . Place the base on the installation surface, mark 2 screw

holes, drill the holes and insert plastic anchors, if necessary.
C . Fasten the base to the mounting surface, using 2 screws.
D . Replace the reader’s cover.

NOTE: Make sure that the cover is aligned with the reader, as
shown in figure 3, to enabl e the LED to be visible.

(white)

COMM 1

(green)

COMM 2

POWER +

(red

POWER -

black

External
Reader
(optional)

Figure 4 - Wiring Diagram

DE6301 1

:$55$17<

:$55$17<

Visonic Ltd. and/or its subsidiaries and its affiliates ("the Manufacturer") warrants its
products hereinafter referred to as "the Product" or "Products" to be in conformance with
its own plans and specifications and to be free of defects in materials and workmanship
under normal use and service for a period of twelve months from the date of shipment by
the Manufacturer. The Manufacturer's obligations shall be limited within the warranty
period, at its option, to repair or replace the product or any part thereof. The Manufacturer
shall not be responsible for dismantling and/or reinstallation charges. To exercise the
warranty the product must be returned to the Manufacturer freight prepaid and insured.

This warranty does not apply in the following cases: improper installation, misuse,
failure to follow installation and operating instructions, alteration, abuse, accident or
tampering, and repair by anyone other than the Manufacturer.

This warranty is exclusive and expressly in lieu of all other warranties, obligations or
liabilities, whether written, oral, express or implied, including any warranty of
merchantability or fitness for a particular purpose, or otherwise. In no case shall the
Manufacturer be liable to anyone for any consequential or incidental damages for breach
of this warranty or any other warranties whatsoever, as aforesaid.

This warranty shall not be modified, varied or extended, and the Manufacturer does not
authorize any person to act on its behalf in the modification, variation or extension of this
warranty. This warranty shall apply to the Product only. All products, accessories or
attachments of others used in conjunction with the Product, including batteries, shall be
covered solely by their own warranty, if any. The Manufacturer shall not be liable for any
damage or loss whatsoever, whether directly, indirectly, incidentally, consequentially or
otherwise, caused by the malfunction of the Product due to products, accessories, or
attachments of others, including batteries, used in conjunction with the Products.

The Manufacturer does not represent that its Product may not be compromised and/or
circumvented, or that the Product will prevent any death, personal and/or bodily injury
and/or damage to property resulting from burglary, robbery, fire or otherwise, or that the
Product will in all cases provide adequate warning or protection. User understands that a
properly installed and maintained alarm may only reduce the risk of events such as
burglary, robbery, and fire without warning, but it is not insurance or a guarantee that such
will not occur or that there will be no death, personal damage and/or damage to property
as a result.

The Manufacturer shall have no liability for any death, personal and/or bodily injury
and/or damage to property or other loss whether direct, indirect, incidental,
consequential or otherwise, based on a claim that the Product failed to function.

However, if the Manufacturer is held liable, whether directly or indirectly, for any loss or
damage arising under this limited warranty or otherwise, regardless of cause or origin, the
Manufacturer's maximum liability shall not in any case exceed the purchase price of the
Product, which shall be fixed as liquidated damages and not as a penalty, and shall be the
complete and exclusive remedy against the Manufacturer.

Warning: The user should follow the installation and operation instructions and among
other things test the Product and the whole system at least once a week. For various
reasons, including, but not limited to, changes in environmental conditions, electric or
electronic disruptions and tampering, the Product may not perform as expected. The user
is advised to take all necessary precautions for his /her safety and the protection of
his/her property.

6/91

VISONIC LTD. (ISRAEL): P.O.B 22020 TEL-AVIV 61220 ISRAEL. PHONE: [phone], FAX: [phone]
VISONIC INC. (U.S.A.): 10 NORTHWOOD DRIVE, BLOOMFIELD CT. 06002-1911. PHONE: [phone] FAX: [phone]
VISONIC LTD. (UK): UNIT 1, STRATTON PARK, DUNTON LANE, BIGGLESWADE, BEDS. SG18 8QS. PHONE: [phone] FAX: [phone]

VISONIC LTD. 1998 RDR-1 DE6301- (REV. 0 11/98)

www.visonic.com

2 DE6301