Vision’sVision Flat-panel Mount- Wall range is designed by Vision's engineering team for professional AV installers. This
mount is no-compromise: very strong, fast to install, highly adjustable, everything included. The VFM-W8X6 ts any atpanel LCD or LED screen which has rear mounting holes up to 800 wide x 600 mm tall apart.
Heavy Duty Tilting Flat-Panel Wall Mount
800×600
VFM-W8X6T EU SAP: 4934296 US SAP: 13557608
vav.link/vfm-w8x6t
Tilting Wall Mount for large-format at panels 47-90"
(subject to VESA pattern and weight limit)
Mounting points up to 800 (wide) x 600 mm (tall) apart
Heavy duty 130 kg / 287 lb SWL
Display latches in place
Optional camera shelf
Heavy Duty
Interactive at panels are large and very heavy. Vision’s VFM-W8X6T uses heavy gauge sheet
metal to take the weight up to SWL 130 kg / 287 lb safely.
Everything Included
Vision includes everything you need including a load of M5, 6, and 8 bolts in varying lengths to
x the vertical arms to the rear of the display.
For 47-90" Displays
Fits most displays from 47-90″ subject to VESA pattern and weight limit. Note: curved screens
are not supported by this mount.
Meets ADA Regulations
The thin design holds the display just 51 mm / 2.0" off the wall. This looks better, reduces
snagging risk, and because the load is close to the wall the mount has a higher safe working
load rating.
Designed for Professionals
A proven design allows fast xing, and slotted holes on the wall part allowing levelling
adjustment after xing.
Latches Securely
The display latches on the horizontal section as the display is hung in place. Snap the plastic
pull-rods off to length so they are hidden behind the display. Give the pull-rods a downward tug
to unlatch the display.
Side by Side
Two horizontal sections can be xed together side by side for dual-display video conference or
huddle room applications. Or extend the horizontal to bridge wide load bearing points in a wall.
Hide Media Player
Thoughtfully placed VESA 100 x 100 mm holes on the horizontal part allow a thin media
player to x behind the display out of sight.
Optional Laptop Shelf
An optional shelf xes at four different heights in 80 mm (3.1") increments to the horizontal
part of the wall mount. The platform is 450 mm (17.7") wide by 306 mm (12.0") deep. At the
lowest height setting the shelf is 680 mm (26.8") below the centre of screen.
Part Number:
VFM-WLS [EU SAP: 4857149 / US SAP: 13557610] Due into stock late 2019