Vision VFM-W6X4T User Manual

Vision’s Vision Flat-panel Mount - Wall range is designed by Vision's engineering team for professional AV
installers. This mount is no-compromise: very strong, fast to install, highly adjustable, everything included. The
VFM-W6X4 fits any flat-panel LCD or LED screen which has rear mounting holes up to 600 wide x 400 mm tall
apart.

VFM-W6X4T Heavy Duty
Tilting Flat-Panel Wall
Mount 600×400

1 EU SAP: 4996386 US SAP: 13557605

visionaudiovisual.com/vfm-w6x4t

Tilting Wall Mount for large-format flat panels 37-75"
Mounting points up to 600 (wide) x 400 mm (tall) apart
Heavy duty 100 kg / 220 lb SWL
Display latches in place
Optional camera shelf

Heavy Duty

Interactive flat panels are large and very heavy. Vision’s VFM-W6X4T uses heavy gauge
sheet metal to take the weight up to SWL 100 kg / 220 lb safely.

Everything Included

Vision includes everything you need including a load of M5, 6, and 8 bolts in varying
lengths to fix the vertical arms to the rear of the display.

For 37-75″Displays

Fits most displays from 37-75″. Note: curved screens are not supported by this mount.

Meets ADA Regulations

The thin design holds the display just 45 mm / 1.8" off the wall. This looks better,
reduces snagging risk, and because the load is close to the wall the mount has a higher
safe working load rating.

Designed for Professionals

A proven design allows fast fixing, and slotted holes on the wall part allowing levelling
adjustment after fixing.

Latches Securely

The display latches on the horizontal section as the display is hung in place. Snap the
plastic pull-rods off to length so they are hidden behind the display. Give the pull-rods a
downward tug to unlatch the display.

Side by Side

Two horizontal sections can be fixed together side by side for dual-display video
conference or huddle room applications. Or extend the horizontal to bridge wide load
bearing points in a wall.

Hide Media Player

Thoughtfully placed VESA 100 x 100 mm holes on the horizontal part allow a thin media
player to fix behind the display out of sight.

Optional Laptop Shelf

An optional shelf fixes at four different heights in 80 mm (3.1") increments to the
horizontal part of the wall mount. The platform is 450 mm (17.7") wide by 306 mm
(12.0") deep. At the lowest height setting the shelf is 680 mm (26.8") below the centre of
screen.

Part Number: VFM-WLS [EU SAP: 4857149 / US SAP: 13557610] Due into stock

late 2019

Video Conference Shelf

An optional shelf fixes in the centre above or below the display. Any camera including
the Logitech Rally can be fixed to the shelf. It is also designed to accommodate
Yamaha’s YVC-1000, Barco’s Clickshare CSE-200 base station, or Logitech’s Meetup
wall bracket can fix to the vertical part. With VESA 100 x 100 mm holes on the vertical
section, product's like Heckler's Zoom Room iPad enclosure can be fixed.

Part Number:

VFM-WVC [EU SAP: 5048878 / US SAP: tbc]

12° Tilt

Ideal in applications where the display is mounted high, this mount features tilt to direct
the display downward.