TC-HDMI12
OWNERS MANUAL
www.visionaudiovisual.com/techconnect/tc-hdmi12/
TC-HDMI12_manual_en.doc
1
DECLARATION OF CONFORMITY
Where applicable Vision products are certified and co m ply with all known local regulations to a
‘CB Certification’ standard. Vision commits to ensure all p r o ducts are fully compliant with all
applicable certification standards for sale in the EU a nd other participating countries.
The product described in th is o wner manual is in compliance with RoHS (EU directive
2002/95/EC), and WEEE (EU directive 2002/96/EC) standards. This product should be returned
to the place of purchase at the end of its useful life for rec y cling.
WARNINGS
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the
user to the presence of uninsulated “dangerous voltage” within the pro duct’s enclosure that may be
of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle, is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the
appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
All products are designed a nd imported into the EU by ‘Vision’ who is wholly owned by ‘Azlan
Logistics Ltd.’, Registered in England Nr. 04625566 at Lion House, 4 Pioneer Business Park,
Clifton Moor, York, YO30 4GH. WEEE Registration: GD0046SY
DECLARATION OF ORIGIN
All Vision products are mad e in the People’s Republic of China ( PRC).
TC-HDMI12_manual_en.doc
2
USE ONLY DOMESTIC AC OUTLETS
Connecting the unit to an outlet supplying a higher voltage ma y create a fire hazard.
HANDLE THE POWER CORD WITH CARE
Do not disconnect the plug from the AC outlet by pulling the c or d; always pull the plug itself.
Pulling the cord may damage it. If you do not in tend to use your unit for any considerable
length of time, unplug the unit. Do not place furniture or other hea vy ob jects on the cord, and
try to avoid dropping heavy objects on it . Do not tie a knot in the power cord. Not only could
the cord be damaged, but a short circuit could also be cause d with a consequent fire ha zard.
PLACE OF INSTALLATION
Avoid installing this produ ct under the following conditions:
• Moist or humid places
• Places exposed to direct sunlight or close to heating e quipment
• Extremely cold locations
• Places subject to excessi v e vibration or dust
• Poorly ventilated places
Do not expose this product to dripping or splashing. DO NOT PLACE OBJECTS FILLED WITH
LIQUIDS ON OR NEAR THIS PRODUCT!
MOVING THE UNIT
Before moving the unit, be sure to pull out the power cord from t he AC outlet and disconnect
the interconnection cords with other units.
WARNING SIGNS
If you detect an abnormal smell or smoke, turn this produ ct off immediately and unplug the
power cord. Contact your reseller or Vision.
PACKAGING
Save all packing material. I t is essential for shipping in the event the unit ever needs repair.
IF ORIGINAL PACKAGING IS NOT USED TO RETURN THE UNIT TO THE SERVICE CENTRE,
DAMAGE IN TRANSIT WILL NOT BE COVERED BY WARRANTY.
TC-HDMI12_manual_en.doc
3
FRONT AND REAR PANELS
1 2 4 6 2
3
4 5
1. EDID Dip Switches
2. Power Indicator LED
3. Output Status LED
ON display is connected and powered on
OFF display is not connected or it is powered off
FLASHING problem with EDID handshake
4. HDMI Inputs. Connect PC or BlueRay.
5. HDMI Outputs. Connect display or projector.
6. 5V 2A Power input
4
TC-HDMI12_manual_en.doc
INSTALLATION
1. CONNECT INPUT
Plug HDMI cable into input.
Input and output cables are not included with this product.
2. CONNECT OUTPUTS
This product features pre-emphasis and equalization to overcome cable deficien cies. This
may not always be successfu l if poor quality cable is used.
3. TURN POWER ON
With the switch off at the wall, connect power adaptor then turn on. Source and display
devices can be turned on before they are connected.
It is not essential to do the steps in this order but i t helps EDID handshake. If it is still not
working check the status lights to see if they are connec te d, and try cycling power.
NOTE: This product can be cascaded
5
TC-HDMI12_manual_en.doc
EDID
Switch
1 2 3 4
EDID fixed at…
0 0 0 0 4k@60Hz 2.0
1 0 0 0 4k@60Hz 7.1
0 1 0 0 4k@30Hz 2
1 1 0 0 4k@30Hz 7.1
0 0 1 0 1080p@60Hz 2.0
1 0 1 0 1080p@60Hz 7.1
0 1 1 0 1080i@60Hz 2
1 1 1 0 1080i@60Hz 7.1
0 0 0 1 720p@60Hz 2.0
1 0 0 1 720P@60Hz 7.1
0 1 0 1 480P@60Hz 2.0
1 1 0 1 480p@60Hz 7.1
0 0 1 1 Copy once - reads EDID of the first display connected only
1 0 1 1 Highest audio format, lowest video format
0 1 1 1 Highest video format
1 1 1 1 Lowest video format
EDID is when the source “asks” the display what resolution it is, and outputs that reso lution.
If the resolutions of the two displays vary it can cause EDID handshake issues.
This can be overcome with fix ing the resolution; the splitter tells the sou rce to output a
resolution that might not m a tch the displays, but most displays can accept and scal e a
resolution the same or les s th an their native resolutio n.
Switch Position
Up = 1
Down = 0
6
TC-HDMI12_manual_en.doc
TROUBLESHOOTING
If your system is not operating pr operly, please refer to the following information. If th e
problem persists, disconn ect from power and contact you r AV reseller immediately .
Problem
No status lights
Correction
• Check input and output cables
• Check source and displays are turned on
No picture on display/s • Check everything is powered on
• Check cables are connected properly
• Try shorter cables
• Check that the corresponding LED is lighting on the splitter
• Ensure display device supports HDCP (copy protectio n)
• Check that display has co r r e ct input selected
No power light
• Try alternative power supply
Display shows snow or
mosaic
• Check cables are connected properly
• Try shorter cables
• Reduce resolution of source or try another source
TC-HDMI12_manual_en.doc
7
SPECIFICATIONS
PRODUCT DIMENSIONS: 101 x 59.5 x 17 mm / 3.98" x 2.34" x 0.67" (length x width x height)
PACKAGED DIMENSIONS: 120 x 84 x 77 mm / 4.72" x 3.31" x 3.03"
PRODUCT WEIGHT: 0.11 kg / 0.24 lb
PACKAGED WEIGHT: 0.34 kg / 0.75 lb
CONSTRUCTION MATERIAL: Metal
COLOUR: White
TECHNICAL DETAILS
Video Amplifier Bandwidth: 18 Gbps
Input Video Signal: 0.5-1.2 volts p-p (T MDS)
Input DDC Signal: 5 volts p-p (TTL)
Maximum Video Format Supp orted: 4K @ 60Hz, Deep Colour, Lip Sync
Output Video: HDMI 2.0
Maximum Audio Format Support: Direct Stream Digital and HD (HBR)
ESD Protection: ± 4kV (contact discharge through human body)
Operating Temperature Range: -0 to +35°C (-41 to +95 °F)
Operating Humidity Range: 10 to 90 % RH (no condensation)
Power Consumption: 5 Watts (max.)
INPUTS: 1 x HDMI (type A)
OUTPUTS: 2x HDMI (type A)
POWER SUPPLY: 100-240v 50/60Hz AC 5 volt / 1 amp
Transformer integrated in to plug. Includes interchangeable plugs: UK/EU/US/AU. DC tail length:
1.8m. Transformer dimensions: 66 x 43 x 32mm / 2.6" x 1.69" x 1.26"
ACCESSORIES INCLUDED: -
WARRANTY: Lifetime return-to-base
2 years onsite (UK only)
COMPLIANCE: RoHS, WEEE, CE/EMC, FCC, RCM, TVC
TC-HDMI12_manual_en.doc
8
LIFETIME RETURN-TO-BASE WARRANTY
This product comes with a lifetime return to base warranty. If you have a problem you are
required to provide a DETAILED DESCRIPTION of the fault.
Some Vision products are ver y technical and require troubleshooting all elements of the
installation as it may not be t he Vision product at fault. Beca use of this the manufacturer may
refuse to replace the item if a n adequate description is not provided.
• This warranty applies onl y to the original purchaser a nd is not transferable.
• This warranty protects you against the following:
o Failure of any components, including the power sup ply.
o Damage when the product is first removed from its packa ging if reported within
24 hours of purchase.
• If the product is DOA (dead on arrival), you have 21 days from purchase date to notify the
national distributor via your AV reseller.
• The original purchaser is res ponsible for shipment of the product to the Vision’s appointed
service centre.
• The liability of Vision is limited to the cost of replacement of the faulty unit under warranty
except for death or injury (EU85/374/EEC).
• If the product is end of line (EOL) the Vision will pr ov ide a credit instead of replacement.
• This warranty does not protect this product against fa u lts caused by abuse, misuse ,
incorrect installation, unstable or faulty power input, or modification.
Vision aims to send a replacem ent item within 5 working da ys h owever this may not always b e
possible, in which case it will be sent as soon as practicably possible. UK End users and resellers
can request support at http://www.visionaudiovisual.com/support
LEGAL DISCLAIMER: Because we are committed to improving our products, the details above
may change without prior warning. This User Manual is published w ithout warranty and any
improvements or changes to the User Manual necessitated by typographical errors, inaccuracies
of current information, or improvements to programs and/or equipment, may be made at any
time and without notice. Such changes will be incorporated into new editions of the User
Manual.
TC-HDMI12_manual_en.doc
9
Loading...