Vision SX80, SX100 User Manual

User Guide

SX80/SX100 Stereo Zoom Microscope

SX80/SX100

INTRODUCTIONSX80/SX100 Stereo Zoom Microscope

Vision Engineering manufacture a wide range of patented optical systems, offering fatigue-free viewing with superb
hand-eye co-ordination, for improved quality and productivity.

To achieve the most from this precision instrument, please read the enclosed assembly instructions, usage and
maintenance guidelines.

Safety Statement

Bench stand

Electrical Supply

• Volt age: Elec tri cal de scrip tion: 230VAC/115VAC 50Hz/60Hz 20W

• Im pulse with stand (over volt age):400V

Environmental Conditions

• In door use only

• Maximum altitude: 2000M above sea level

• Ambient operating temperature: between 5°C and 40°C

• Storage temperature: between 0°C and 55°C centigrade for 3 months without any adverse ef fects

• Relative humidity specification: Operating temp up to 31°C: 80%, 34°C: 70%, 37°C: 60% and 40°C: 50%

• Mains voltage supply fluctuations not to exceed ± 10% of nominal volt age

• If equipment is not used in a manner as specified, protection provided by the equipment may be im paired

• The product should be located such that the power supply can be unplugged in the event of an emer gency

LED Ringlight

Electrical Supply

• Volt age: Elec tri cal de scrip tion: 100-240VAC 50/60HZ 280mA

Environmental Conditions

• In door use only

• Am bi ent operating temp: between 0°C and 40°C

• Stor age temperature: between 0°C and 40°C for 3 months without any adverse ef fects

• Relative humidity specification: Operating temp up to 45°C: 80%, 28°C: 70%, 20°C: 60% and 16°C: 50%

• Mains voltage supply fluctuations not to exceed ± 9 % of nominal volt age

• If equipment is not used in a manner as specified, protection provided by the equipment may be im paired

• The product should be located such that the power supply can be unplugged in the event of an emergency

INTRODUCTION

CONTENTSPACKING CONTENTS

Head 1

Stand 1

Boom stand 2

Dual-arm boom stand 2

Optional accessories 3

Optical data 3

ASSEMBLY

Head attachment 4

Eyepiece attachment 4

Power cable connection 5

Stage glass attachment 5

Boom stand 6

Dual-arm boom stand 6

LED ringlight (optional) 7

Photographic attachment 7

OPERATION & SETUP

Main system controls 8

Bench stand controls 8

Boom stand controls 9

Dual-arm boom stand controls 9

SERVICE RECORD

WARRANTY

CONTENTS