Vision SB-800P Owner's Manual

1

SB-800P_manual_en

SB-800P SOUNDBAR LOUDSPEAKER
OWNERS MANUA L

www.visionaudiovisual.com/techaudio/sb-800p

2

SB-800P_manual_en

DECLARATION OF CONFORMITY

Where applicable Vision products are certified and comply with all know n local regulations to a
‘CB Certification’ standard. Vision com m its to ensure all products are fully compliant with all
applicable certification standards f or sale in the EU and other participating countries.

The product described in this owner manual is in compliance with RoHS (EU directive
2002/95/EC), and WEEE (EU directive 2002/96/EC) standards. This product should be returned
to the place of purchase at the end of its useful life for recycling.

WARNINGS

CAUTION : TO R ED UC E THE RISK OF EL EC TR IC SHOC K DO NOT REMOV E COV ER (OR
BACK). N O USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE P ER SONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the
user to the pres ence o f uninsulated “dangerous voltage” within the product’s enclosure that may be
of sufficient magnitude to co ns t itute a risk of electric shock to persons.

The exclamation point within an equilateral triangle, is intend ed to alert the us er to t he presence of
important operating and m aintenance (servicing) instructions i n t he li te rature acco m pany ing the
appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRI C SH OCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.

All products are designed and imported into the EU by ‘Vision’ who is wholly owned by ‘Azlan
Logistics Ltd.’, Registered in England Nr. 04625566 at Lion House, 4 Pioneer Business Park,
Clifton Moor, York, YO30 4GH. WEEE Registration: GD0046SY

DECLARATION OF ORIGIN

All Vision products are made in the People’s Republic of China (PRC).

3

SB-800P_manual_en

USE ONLY DOMESTIC AC OUTLETS

Connecting the unit to an outlet supp ly ing a highe r v o lta ge may create a f ire ha z a rd.

HANDLE TH E POWER CORD WITH CARE

Do not disconnect the plug from the AC outlet by pulling the cord; always pull the plug itself.
Pulling the cord may damage it. If you do not intend to use your unit for any considerable
length of tim e, unplug the unit. Do not place f urni tu re o r o ther he av y o bje cts o n the co rd, a nd
try to avoid dropping heavy objects on it. Do not tie a knot in the power cord. Not only could
the cord be damaged, but a short circuit could also be caused with a consequent fire hazard.

PLACE O F INSTALLATION

Avoid installing this product under the following conditions :

• Moist or humid places

• Places exposed to direct sunlight or close to heating equipment

• Extremely cold locations

• Places subject to excessive vibration or dust

• Poorly ventilated places
Do not expose this product to dripping or splashing. DO NOT PLACE OBJECTS FILLED WITH

LIQUIDS ON OR NEAR THIS P ROD UCT!

MOVING THE UNIT

Before moving the unit, be sure to pull out the power cord from the AC outlet and disco nne ct
the interco nnection cords w i th o ther units .

WARNING SIGNS

If you detect an abnormal smell or smoke, turn this product off immediately and unplug the
power cord. Contact your reseller or Vision.

PACKAGING

Save all packing material. It is essential for shipping in th e e v ent the uni t ev er needs repai r.
IF ORIG I N A L PACKAGING IS NOT USED TO R ETUR N THE UNIT TO THE SERV I CE C ENTRE,

DAMAGE IN TRANSIT WILL NOT BE COVERED BY WARRANTY.

WATTS

The most consistent standards f or measuring w a tts a re “Program Pow er” and “RMS” because
these measure average sustained levels.

Where loudspeakers have integrated amplifiers, then load (resis ta nce, measured in ohm s ) is
known so the wattage rating is fixed.

4

SB-800P_manual_en

REAR PANEL

UNDERSIDE

Volume Dial

Turn anticlockwise until it
clicks to tu rn off

Power Input

(phoenix connector)

Line-level Inputs:

1 x 3.5mm Minijack

1 x 2-Phono (R C A)

Power LED

Speaker-Level Inputs

(phoenix connector)

Inputs Selector