8' x 7' Vinyl Storage Shed
PLEASE READ OWNER’S MANUAL COMPLETELY
BEFORE ASSEMBLING YOUR BUILDING.
ALL STATED SIZES ARE NOMINAL DIMENSIONS.
Model #S-8070-A Storage Shed
Owner’s Manual
8' x 7' (2.44m x 2.14m)
Parts List
FASTENERS
Hinge Screws For door hinges 12
#8 x 1" Pan Head Screws For wall & roof panels 150
#8 x 3/4" Pan Head Screws For base track 65
Vent Cap Screws For vent cap sets 4
Congratulations on your purchase of this Vision Vinyl
Storage Building! As with any construction or assembly
project, please exercise caution when using tools and
equipment to install this structure. Be sure to read and
follow the instructions contained within this manual
prior to assembly. If you have any questions before,
during or after assembly, please contact the Vision
Help Line at 1-866-633-9970. We welcome your call
and will be glad to assist you in any way we can.
Assembly Safety Tips
• Use proper lifting procedures when handling
the packages.
• Take care when handling the individual components
and wear gloves to avoid cuts or scrapes.
• Follow proper operating procedures for any tools,
ladders, etc. used when assembling the building.
• Protect your eyes. Always wear safety glasses when
assembling building and when using power tools
and hammers.
• Do not assemble building during high winds.
• Do not assemble building if parts are missing.
A partially assembled building may be seriously
damaged by high winds.
• This building must be anchored to the foundation to
prevent wind damage. Follow anchoring instructions
accordingly.
NOTE: Before assembly of this structure –
Please take a complete inventory of the parts and
components contained in the shed pallet/package
and compare with the parts list and parts identication
diagrams shown on the next few pages. If any parts
are missing, please contact the Vision Help Line.
DO NOT ATTEMPT TO ASSEMBLE THIS PRODUCT
IF ANY PARTS ARE MISSING OR DAMAGED.
Please do not attempt to return this product to
the store where you purchased it. For assistance
or parts replacement, call the Vision Help Line
at 1-866-633-9970.
PRODUCT LENGTH
PRODUCT DESCRIPTION NO. (INCHES) QTY
Wall Panel WP1 71.5 18
Roof Panel RP2 50.125 18
Corner Post CNR 71.5 4
Sloped Wall Panel WP2 76 2
Sloped Wall Panel WP3 79 1
Sloped Wall Panel WP4 81.937 1
Sloped Wall Panel WP22 84.937 1
Sloped Wall Panel WP23 86.937 1
Sloped Wall Panel WP8 76 2
Sloped Wall Panel WP9 79 1
Sloped Wall Panel WP10 81.937 1
Sloped Wall Panel WP24 84.937 1
Sloped Wall Panel WP25 86.937 1
Door Header Door Header 1
Roof Gable End [A] RG-A2-50 2
Roof Gable End [B] RG-B2-50 2
Ridge Cap RBC2-84 1
Fascia FC2-88 2
left and right. Includes pre-installed
Doors –
aluminum astrigal and hinges
Gable End Cap Gable End Caps 2
Vent Cap (set of 2 ea. inside/outside pcs) Vent Caps 2
ALUMINUM COMPONENTS
Aluminum Ridge Beam F512H02 1
Aluminum Sloped Side Wall Cap F512G02 2
Aluminum Door Lintel F512I01 1
Aluminum Door Frame Left Aluminum & Vinyl 1
Aluminum Door Frame Right Aluminum & Vinyl 1
Aluminum Base Track F512K05 1
Aluminum Base Track F512K04 2
Aluminum Base Track F512K03 2
Aluminum Base Track F512K02 2
Aluminum Base Track F512K01 2
Aluminum Base Track F512K06 2
Door Handle 2
Door Latch 2
Door Panel
2
2
WP2
WP3
Aluminum
Door Frame Left
WP8
WP9
Aluminum
Door Frame Right
CNR
F512K04
F512K06
F512K03
F512K03
F512I01
F512K04
F512K06
F512K05
F512K02
F512K02
F512K01
F512K01
CNR
RP2
Outside Vents
Inside Vents
F512H02
Ridge Cap
Gable End Cap
RP2
FC2
FC2
CNR
CNR
WP8
WP1
WP9
WP10
WP24
WP25
WP23
WP22
WP4
WP3
WP2
WP1
Door Header
RGA-2
RGA-2
RGB-2
RGB-2
Gable End Cap
F512G02
F512G02
Door
Door
Parts Location
See parts list on
previous page for
parts description
NOTE: Before assembly of this structure –
Please take a complete inventory of the parts and components contained in the shed
pallet/package and compare with the parts list and parts identication diagrams shown
on the next few pages. If any parts are missing, please contact the Visions Help Line.
DO NOT ATTEMPT TO ASSEMBLE THIS PRODUCT IF ANY PARTS
ARE MISSING OR DAMAGED.
3
Wall Panel
Corner Post
Fascia Gable
Lintel
(Upside Down)
Roof Panel
Base Track
Slope Wall Cap
Door Handle (2)
Door Latch (2)
Door (2)
#8 x 1" Pan Head Screws (150)
Hinge Screws (12)
#8 x 3/4" Pan Head Screws (65)
Parts Identication
Tools Required
• Power drill with Phillips® (#2) or a #2 square bit • Carpenter’s square
• Level • Rubber mallet • Hammer • Safety glasses • Gloves • 1/4" and 5/32" drill bit
• Wrench - 7/16" size • Measuring tape - minimum 16' feet (5m) • Ladder
Phillips is a registered trademark of PhillipsScrew Co.
Materials Needed
• Silicone caulking
4
Concrete Floor Option
Concrete Floor Option
You may decide to construct your Vision storage
shed on a concrete foundation, in which case it is
recommended that you engage the services of a
concrete contractor.
Prior to having a concrete foundation poured
please perform the following:
• Make sure your structure will comply with local
building codes and ordinances.
• Select a location that is free from ground water
and provides suitable drainage, that can be
leveled properly and affords ample room to
erect the shed.
88-1/4"
Recommended Concrete
Foundation Dimensions
93-1/8"
Overall Shed
Dimensions
Consult your concrete contractor
about the following:
• Ask your contractor to conrm the specications for the concrete
thickness required for your locate climate and soil type. Certain
building codes may apply as well.
• Request the concrete foundation be made 2-inches larger around
all sides than the overall dimensions of the storage shed. This
will afford adequate space for drilling anchor holes and inserting
fasteners to secure the shed base track to the concrete, thereby
avoiding possible cracking or chipping of the concrete surface.
• Conrm that moisture barrier will be laid before the concrete
is poured.
• Request the foundation surface to be free of bumps and ridges.
Be sure concrete is level to prevent water from collecting at the
front door opening of the building.
• (Optional) Inquire whether concrete sealer/paint should be
applied to the cured oor to prevent moisture build-up in
the structure.
84-1/4"
72-1/2"
97-1/8"
5