VISHAY VIS 790D686X0016 Datasheet

www.vishay.com

12 mm

min.

e

T

D

0.3 mm
MIN.

H

Ø

+

Resin-Molded, Radial-Lead

Solid Tantalum Capacitors

PERFORMANCE CHARACTERISTICS

Operating Temperature: - 55 °C to +125 °C
(above 85 °C, voltage derating is required)

Capacitance Range: 0.1 μF to 330 μF
Capacitance Tolerance: ± 10 %, ± 20 %
Voltage Rating: 6.3 V

to 50 V

DC

DC

FEATURES

• Terminations: Tin/lead (SnPb), 100 % tin (Sn)

• Four case sizes precisely molded with a flame
retardant epoxy resin

• Stand off on all case sizes

• Available on tape for automatic insertion equipment (only
A- and B-case, C- and D-case on request)

• Low leakage current

• Low impedance

• Extended value ranges available

• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912

Note

*

Thi s datasheet pro vi des information about parts that are
RoHS-compliant and/or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.

790D

Vishay Sprague

Available

Available





ORDERING INFORMATION

790D 157 X0 006 R 2 P E3

MODEL CAPACITANCE CAPACITANCE

790D =

Standard

and

extended

range

Expressed in

picofarads.

The first two

digits are the

significant

figures. The

third is the
number of

zeros following.

TOLERANCE

X0 = ± 20 %
X9 = ± 10 %

DC VOLTAGE

RATING

Expressed in

volts. To

complete the

three-digit
block, zeros
precede the

voltage rating.

A decimal

point is indicated

by an “R”

(6R3 = 6.3 V)

CASE

CODE

See

Ratings

and Case

Codes

table

STYLE

NUMBER

Insulated

case

(standard)

PACKAGING RoHS

See packing information

B: Bulk
G: Ammopack
(H = 16.5 mm)
H: Ammopack
(H = 18.5 mm)

I: Ammopack shouldered

leads (A case)

X: Reel pack

(H = 16.5 mm)

Y: Reel pack

(H = 18.5 mm)

Z: Reel pack shouldered

leads (A case)

COMPLIANT

E3 = 100 %

tin termination

compliant)

Blank = SnPb

termination

DIMENSIONS in inches [millimeters]

(RoHS

CASE CODE H MAX. D MAX. T MAX. E ± 0.15 [0.006] Ø 0.05 [0.002] (+10 %)

A 0.287 [7.3] 0.185 [4.7] 0.165 [4.2] 0.100 [2.54] 0.020 [0.5]
B 0.413 [10.5] 0.287 [7.3] 0.189 [4.8] 0.200 [5.08] 0.020 [0.5]
C 0.413 [10.5] 0.484 [12.3] 0.287 [7.3] 0.400 [10.16] 0.024 [0.6]
D 0.413 [10.5] 0.484 [12.3] 0.484 [12.3] 0.400 [10.16] 0.024 [0.6]

Revision: 03-Feb-14

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

For technical questions, contact: [e-mail]

1

Document Number: 42072

790D

www.vishay.com

RATINGS AND CASE CODES

RATED VOLTAGE U

6.3 V 10 V 16 V 20 V 25 V 35 V 40 V 50 V

CR

(μF)

4.0 V 6.3 V 10 V 13 V 16 V 23 V 25 V 32 V

STD. EXT. STD. EXT. STD. EXT. STD. EXT. STD. EXT. STD. EXT. STD. EXT. STD. EXT.

0.10 AA

0.15 AA

0.22 AA

0.33 A

0.47 A

0.68 A

1.0 AA

1.5 ABB

2.2 A A B B

3.3 A A B A B

4.7 A A B B

6.8 A A B C

10 A B B C C

15 A B B B C C

22 A B B B C

33 B B C C D

47 B B C C D D

68 B C C

100 C D C D

150 C C D

220 C D

330 D

CATEGORY VOLTAGE U

AT +85 °C

R

AT +125 °C

C

Vishay Sprague

STANDARD RATINGS/EXTENDED RATINGS

CAPACITANCE

C

(μF)

R

6.8 A 790D685X(1)6R3A2(2) 1.0 6 4.0

22 A 790D226X(1)6R3A2(2) 1.3 6 2.1

47 B 790D476X(1)6R3B2(2) 2.9 6 1.3

68 B 790D686X(1)6R3B2(2) 4.2 6 1.3

150 C 790D157X(1)6R3C2(2) 9.4 6 0.6

220 C 790D227X(1)6R3C2(2) 13.8 6 0.6

330 D 790D337X(1)6R3D2(2) 20.7 8 0.4

Notes

• Part number definitions:
(1) Insert 0 for ± 20 % tolerance or 9 for ± 10 %
(2) See Ordering Information, packaging code

• Extended ratings in bold print

Revision: 03-Feb-14

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

CASE CODE PART NUMBER

U

= 6.3 VDC AT +85 °C, SURGE = 8 V; UC = 4 VDC AT +125 °C, SURGE = 5 V

R

For technical questions, contact: [e-mail]

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

MAX. DCL

AT +25 °C

(μA)

2

MAX. DF

120 Hz, AT +25 °C

(%)

MAX. IMPEDANCE
100 kHz, AT +25 °C

Document Number: 42072

()

www.vishay.com

STANDARD RATINGS/EXTENDED RATINGS

CAPACITANCE

C

(μF)

R

4.7 A 790D475X(1)010A2(2) 1.0 6 4.0

15 A 790D156X(1)010A2(2) 1.5 6 2.5

33 B 790D336X(1)010B2(2) 3.3 6 1.3

47 B 790D476X(1)010B2(2) 4.7 6 1.4

68 B 790D686X(1)010B2(2) 6.8 6 1.3

100 C 790D107X(1)010C2(2) 10.0 6 0.6

150 C 790D157X(1)010C2(2) 15.0 6 0.6

220 D 790D227X(1)010D2(2) 22.0 8 0.4

2.2 A 790D225X(1)016A2(2) 1.0 6 5.5

3.3 A 790D335X(1)016A2(2) 1.0 6 4.4

10 A 790D106X(1)016A2(2) 1.6 6 2.7

15 B 790D156X(1)016B2(2) 2.4 6 1.6

22 B 790D226X(1)016B2(2) 3.5 6 1.3

33 B 790D336X(1)016B2(2) 5.2 6 1.6

47 C 790D476X(1)016C2(2) 7.5 6 0.8

68 C 790D686X(1)016C2(2) 10.8 6 0.6

100 C 790D107X(1)016C2(2) 16.0 6 0.7

100 D 790D107X(1)016D2(2) 16.0 6 0.5

150 D 790D157X(1)016D2(2) 24.0 8 0.4

2.2 A 790D225X(1)020A2(2) 1.0 6 5.5

6.8 A 790D685X(1)020A2(2) 1.3 6 3.5

15 B 790D156X(1)020B2(2) 3.0 6 1.5

22 B 790D226X(1)020B2(2) 4.4 6 2.1

47 C 790D476X(1)020C2(2) 9.4 6 0.7

68 C 790D686X(1)020C2(2) 13.6 6 0.8

100 D 790D107X(1)020D2(2) 20.0 6 0.7

1.5 A 790D155X(1)025A2(2) 1.0 6 6.0

4.7 A 790D475X(1)025A2(2) 1.1 6 4.5

10 B 790D106X(1)025B2(2) 2.5 6 1.6

15 B 790D156X(1)025B2(2) 3.7 6 2.4

22 B 790D226X(1)025B2(2) 5.5 6 2.1

33 C 790D336X(1)025C2(2) 8.2 6 0.8

47 D 790D476X(1)025D2(2) 11.8 6 1.0

3.3 A 790D335X(1)035A2(2) 1.2 6 6.0

10 B 790D106X(1)035B2(2) 3.5 6 2.6

33 C 790D336X(1)035C2(2) 11.6 6 1.3

Notes

• Part number definitions:
(1) Insert 0 for ± 20 % tolerance or 9 for ± 10 %
(2) See Ordering Information, packaging code

• Extended ratings in bold print

Revision: 03-Feb-14

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

CASE CODE PART NUMBER

UR = 10 VDC AT +85 °C, SURGE = 13 V; UC = 6.3 VDC AT +125 °C, SURGE = 8 V

U

= 16 VDC AT +85 °C, SURGE = 20 V; UC = 10 VDC AT +125 °C, SURGE = 13 V

R

U

= 20 VDC AT +85 °C, SURGE = 26 V; UC = 13 VDC AT +125 °C, SURGE = 16 V

R

U

= 25 VDC AT +85 °C, SURGE = 32 V; UC = 16 VDC AT +125 °C, SURGE = 20 V

R

U

= 35 VDC AT +85 °C, SURGE = 45 V; UC= 23 VDC AT +125 °C, SURGE = 29 V

R

For technical questions, contact: [e-mail]

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

MAX. DCL

AT +25 °C

(μA)

3

MAX. DF

120 Hz, AT +25 °C

(%)

Vishay Sprague

MAX. IMPEDANCE
100 kHz, AT +25 °C

Document Number: 42072

790D

()

www.vishay.com

STANDARD RATINGS/EXTENDED RATINGS

CAPACITANCE

C

(μF)

R

0.10 A 790D104X(1)040A2(2) 1.0 6 30.0

0.15 A 790D154X(1)040A2(2) 1.0 6 24.0

0.22 A 790D224X(1)040A2(2) 1.0 6 18.0

0.33 A 790D334X(1)040A2(2) 1.0 6 14.0

0.47 A 790D474X(1)040A2(2) 1.0 6 11.0

1.0 A 790D105X(1)040A2(2) 1.0 6 6.5

1.5 B 790D155X(1)040B2(2) 1.0 6 5.2

2.2 B 790D225X(1)040B2(2) 1.0 6 4.0

3.3 A 790D335X(1)040A2(2) 1.3 6 2.8

3.3 B 790D335X(1)040B2(2) 1.3 6 2.8

4.7 B 790D475X(1)040B2(2) 1.8 6 2.0

6.8 B 790D685X(1)040B2(2) 2.7 6 1.6

10 C 790D106X(1)040C2(2) 4.0 6 1.3

15 C 790D156X(1)040C2(2) 6.0 6 1.0

22 C 790D226X(1)040C2(2) 8.8 6 0.8

33 D 790D336X(1)040D2(2) 13.2 6 0.6

47 D 790D476X(1)040D2(2) 18.8 6 0.5

0.10 A 790D104X(1)050A2(2) 1.0 6 30

0.15 A 790D154X(1)050A2(2) 1.0 6 24

0.22 A 790D224X(1)050A2(2) 1.0 6 18

0.68 A 790D684X(1)050A2(2) 1.0 6 8.0

1.0 A 790D105X(1)050A2(2) 1.0 6 6.5

1.5 B 790D155X(1)050B2(2) 1.0 6 5.2

2.2 B 790D225X(1)050B2(2) 1.1 6 4.0

3.3 B 790D335X(1)050B2(2) 1.6 6 2.8

4.7 B 790D475X(1)050B2(2) 2.3 6 2.0

6.8 C 790D685X(1)050C2(2) 3.4 6 1.6

10 C 790D106X(1)050C2(2) 5.0 6 1.3

15 C 790D156X(1)050C2(2) 7.5 6 1.0

Notes

• Part number definitions:
(1) Insert 0 for ± 20 % tolerance or 9 for ± 10 %
(2) See Ordering Information, packaging code

• Extended ratings in bold print

CASE CODE PART NUMBER

UR = 40 VDC AT +85 °C, SURGE = 52 V; UC = 25 VDC AT +125 °C, SURGE = 32 V

U

= 50 VDC AT +85 °C, SURGE = 65 V; UC = 32 VDC AT +125 °C, SURGE = 41 V

R

MAX. DCL

AT +25 °C

(μA)

Vishay Sprague

MAX. DF

120 Hz, AT +25 °C

(%)

790D

MAX. IMPEDANCE
100 kHz, AT +25 °C

()

Revision: 03-Feb-14

For technical questions, contact: [e-mail]

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

4

Document Number: 42072

10

1

0.1

U

rms

30
20

2

5

0.7

7

3

0.5

0.2

0.3

0.1K 0.5 1K 5 10K 50 100K 500

FREQUENCY IN Hz

CASE SIZE “C”

50 V

10 V

25 V

6.3 V

16 V

35/40 V

10

1

0.1

U

rms

30
20

2

5

0.7

7

3

0.5

0.2

0.3

0.1K 0.5 1K 5 10K 50 100K 500

FREQUENCY IN Hz

CASE SIZE “D”

50 V

10 V

25 V

6.3 V

16 V

35/40 V

FREQUENCY IN Hz

10

1

0.1

1K

10K 100K

1M

10M 100M

47 µF

6.3 V

6.8 µF

30

330 µF

150 µF

Ω

www.vishay.com

MAXIMUM PERMISSIBLE RIPPLE VOLTAGE AT +25 °C

CASE SIZE “A”

30
20

10

7

5

3
2

rms

U

1

0.7

0.5

0.3

0.2

0.1

0.1K 0.5 1K 5 10K 50 100K 500

10 V

6.3 V

35/40 V

25 V

16 V

50 V

FREQUENCY IN Hz

U

30
20

10

rms

0.7

0.5

0.3

0.2

0.1

790D

Vishay Sprague

CASE SIZE “B”

7

5

3
2

1

0.1K 0.5 1K 5 10K 50 100K 500

50 V

35/40 V

25 V

16 V

10 V

6.3 V

FREQUENCY IN Hz

TYPICAL CURVES OF IMPEDANCE VS FREQUENCY

Revision: 03-Feb-14

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

100

10

Ω

1

47 µF

0.1

1K

10K 100K

5

For technical questions, contact: [e-mail]

35 V

1µF

6.8 µF

22 µF

1M

FREQUENCY IN Hz

Document Number: 42072

10M 100M

www.vishay.com

PACKAGING QUANTITIES

CASE CODE TAPE AND REEL AMMO BULK

A 1000 1000 500

B 1000 1000 250

C 300 300 100

D 200 200 50

PERFORMANCE CHARACTERISTICS

1. Operating Temperature: - 55 °C to +85 °C with rated
voltage UR applied. +85 °C to 125 °C with linear
voltage derating to category voltage UC (see general
information) applied.

2. Capacitance and Tolerance: Capacitance measured at
100 Hz and +25 °C shall be within the specified tolerance
limits of the nominal rating.

3. Reverse Voltage: 15 % of rated voltage at +25 °C
5 % of rated voltage at +85 °C

4. Surge Voltage: 130 % of U
130 % of UC at +125 °C

5. Impedance at 100 kHz: Measured at +20 °C ± 5 °C,
impedance shall not exceed the values listed in
datasheet.

6. Stability at low and high temperatures: Capacitance
change with temperature, dissipation factor and DC
leakage current shall not exceed the limits of the
following table.

CAPACITANCE

TEMP.

- 55 °C - 10 %

+25 °C -

+85 °C +12 %

+125 °C +15 %

CHANGE

C

RUR

C

RUR

 1900
> 1900

at +85 °C 

R

DISSIPATION

FACTOR

I

L

9 %

11 %

6 % 0.01 C

8 %

9 % 0.1 C

11 %

12 % 0.125 C

14 %

LEAKAGE

CURRENT

-

x UR or

R

1 μA whichever

is greater

x UR or

R

10 μA whichever

is greater

x UR or

R

12.5 μA

whichever

is greater

790D

Vishay Sprague

7. Life Test: 2000 h at +85 °C with rated voltage applied

2000 h at +125 °C with category voltage applied
C/C  10 % of initial value 
IL  1.25 initial limit 
DF  initial limit

8. Humidity Test: 56 days at +40 °C, 90 % relative

humidity 
C/C  8 % of initial value 
IL  initial limit 
DF  initial limit

9. Charge and Discharge Test: 

1 million cycles at +85 °C, 

0.5 s charge at U

0.5 s discharge 
Series resistance < 0.5 
C/C  5 % of initial value 
IL  initial limit 
DF  initial limit

10. Marking: 

Top: Rating and polarity 
Front: Type, date code, Sprague trademark



R

Revision: 03-Feb-14

For technical questions, contact: [e-mail]

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

6

Document Number: 42072

Reel packing

Ammopacking

W

2

W

0

W

1

W

H

0

h

30 MAX.

H

p

t

P

2

P

1

FP

0

Ø D

SPRAGUE

191
201

320 to 330

329 - 331

Ø 20

41 to 45

Direction of unreel

www.vishay.com

TAPE AND REEL PACKING (Case A and B - meets IEC 286-2)

790D

Vishay Sprague

DESIGNATIONS SYMBOL DIMENSIONS (mm)

Pitch of component P 12.7 ± 1.0

Feed hole pitch P

12.7 ± 0.3

0

Tape width W 18 (+ 1/- 0.5)

Hold down tape width W

Hole position W

Hold down tape position W

Feed hole diameter D

0

1

2

0

9 (+ 0.75/-0.5)

0 (+ 3/-0)

4.0 ± 0.3

Tape thickness T 0.5 ± 0.2

Component alignment h0 ± 2

Lead clinch height H

Hole center to component center P

Lead wire spacing 
Feed hole center to wire center

Reel pack options

Ammopack options

0

2

CASE A CASE A CASE B

F 2.5 + 0.6/- 0.1 5 + 0.6/- 0.1 5 + 0.6/- 0.1

P

1

5.1 ± 0.7 3.85 ± 0.7 3.85 ± 0.7

H = 16.5 X
H = 18.5 Y Y

H = 16.5 G
H = 18.5 H H

16.0 ± 0.5

6.35 ± 1.3

12

Z

I

X

G

Revision: 03-Feb-14

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

For technical questions, contact: [e-mail]

7

Document Number: 42072

P

2

P

W

2

W

0

H

1

H

2

H

FP

0

D

0

P

1

W

1

W

t

L

PP

h

h

www.vishay.com

TAPE AND REEL PACKING (Case C and D)

790D

Vishay Sprague

DESIGNATIONS SYMBOL DIMENSIONS (mm)

Pitch of component P 25.4 ± 1.0

Feed hole pitch P

12.7 ± 0.3

0

Tape width W 18.0 (+ 1/- 0.5)

Hold down tape width W

Hole position W

Hold down tape position W

Maximum height of components H

0

1

2

1

12

9.0 (+ 0.75/- 0.5)

0 (+ 3/- 0)

32 max.

Tolerance of positioning parts sideways P0 ± 1.0

Feed hole diameter D

0

4.0 ± 0.3

Tape thickness t 0.5 ± 0.2

Component alignment h0 ± 2

Cut out length L 11 max.

Lead wire spacing F 10.16 + 0.6/- 0.1

Feed hole center to wire center P

Hole center to component center P

Length of leads under adhesive tape H

1

2

2

7.62 ± 0.7

12.7 ± 1.0

5.0 min. to 9.0 max.

CASE C CASE D

Reel pack options

H = 16.5 X X
H = 18.5 Y Y

Ammopack options

PRODUCT INFORMATION

H = 16.5 G G
H = 18.5 H H

Quick Reference Guide www.vishay.com/doc?40037

Selector Guide www.vishay.com/doc?49054

Parameter Comparison Guide www.vishay.com/doc?40033

Mounting of Through-Hole Components www.vishay.com/doc?40108

Frequently Asked Questions www.vishay.com/doc?40110

Revision: 03-Feb-14

8

Document Number: 42072

For technical questions, contact: [e-mail]

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.

Revision: 02-Oct-12

1

Document Number: 91000