VISHAY EB4 Technical data

Edgeboard Connectors

Dual Readout, .100" [2.54mm] C-C, Standard and Right Angle Terminals

ELECTRICAL SPECIFICATIONS

Current Rating: 3 amps. Test Voltage Between Contacts:

At sea level: 650 V RMS. At 70,000 feet [21,336 meters]: 275 V RMS.

Insulation Resistance: 5000 Megohm minimum at 500 VDC

potential.

Contact Resistance: 30 millivolts maximum at rated current

(with gold plating).

Operating Temperature: - 65°C to + 125°C. Humidity: 96 hours at 90% relative humidity at + 40°C, dried

at room temperature for 3 hours minimum, insulation resistance was greater than 5000 Megohm.

Durability: After 500 cycles of insertion and withdrawal of a

.070" [1.78mm] thick steel test board, contact resistance less than .030 V at 3 amps on gold plated contacts and individual contact pair separation force when measured with a .054" [1.37mm] thick steel test blade was greater than 1/2 ounce.

Shock: Three 50g shocks in each of 3 mutually

perpendicular planes with no loss of continuity.

Vibration: 2 hours in each of 3 mutually perpendicular

planes, frequency sweep 10 to 55 cps at .06 double amplitude with no loss of continuity.

MATERIAL SPECIFICATIONS

Body Material:

“1” glass-filled diallyl phthalate per MIL-M-14, T ype SDG-F

green, flame retardant (UL 94V-0).

“2” glass-filled phenolic per MIL-M-14, Type MFH dark

green, flame retardant (UL 94V-0).

“3” thermoplastic polyester, glass-filled, black, flame

retardant (UL 94V-0).

“5” thermoplastic polyphenylene sulfied, glass filled, brown,

flame retardant (UL 94V-0).

Contacts: Phosphor bronze. (See How to Order.) Polarizing Key: Glass reinforced nylon, flame retardant

(UL 94H-B).

Plating: Gold. (See How to Order.)

Model EB4

Vishay Dale

FEATURES

• Grid Patterns: .100" C-C x .150" [2.54mm x 3.81mm] and .100" C-C x .200" [2.54mm x 5.08mm].

• Standard and right angle terminals.

• Greater design latitude: 4 body materials: Diallyl phthalate, phenolic, glass-filled polyester and glass-filled polyphenylene sulfied. 7 contact termination styles - 3 Standard, 4 Right Angle. 20 body sizes and 6 mounting styles.

• Selective gold plating.

• Accepts PC board thickness of .054" to .071" [1.37mm to 1.80mm].

• Polarization between contact positions in all sizes. Between contact polarization permits polarizing without loss of contact position.

• Recognized under the Component Program of

Underwriters Laboratories, Inc. Listed under File E65524, Project 77CH3889.

APPLICATIONS

For use with .0625" [1.59mm] printed circuit boards requiring an edgeboard type connector on .100" [2.54mm] centers.

PHYSICAL SPECIFICATIONS

Contact T ype: Bifurcated Cantilever Beam. Number of Contacts: 10, 12, 15, 18, 20, 22, 25, 28, 30, 31,

35, 36, 40, 43, 44, 48, 49, 50, 60 and 65 per side.

Contact Terminal Variation: Standard terminals.

Type “C” - Dip Solder, .025" [.635mm] square terminals,

.175" [4.44mm] nominal terminal length below standoffs. Type “D” - Dip Solder, .025" [.635mm] square terminals, .115" [2.92mm] nominal terminal length below standoffs. Type “K” - Wire Wrap™, .025" [.635mm] square terminals, .570" [14.48mm] nominal terminal length below standoffs.

Contact Terminal Variation: Right angle terminals.

Type “1R” - Dip Solder, .025" [.635mm] square terminals,

.120" [3.05mm] nominal terminal length x .150" [3.81mm] nominal terminal row spacing. Type “2R” - Dip Solder, .025" [.635mm] square terminals, .120" [3.05mm] nominal terminal length x .200" [5.08mm] nominal terminal row spacing. Type “3R” - Dip Solder, .025" [.635mm] square terminals, .180" [4.57mm] nominal terminal length x .150" [3.81mm] nominal terminal row spacing. Type “4R” - Dip Solder, .025" [.635mm] square terminals, .180" [4.57mm] nominal terminal length x .200" [5.08mm] nominal terminal row spacing.

Contact Spacing: .100" [2.54mm] center to center. Contact T erminal Row Spacing:

Standard - .200" [5.08mm] nominal. Right Angle - .200" [5.08mm] nominal and .150" [3.81mm] nominal.

Card Thickness: .054" to .071" [1.37mm to 1.80mm]. Card Slot Depth: .300" [7.62mm]. Connector Polarization: Between contact polarization

key(s) are located to the right of the contact position(s) designated.

NOTE: High temperature burn-in, edgeboard connectors, with .100" [2.54mm] center to center are on page 19 of this catalog.

Document Number 36001 Revision 01-Nov-99

www.vishay.com

Model EB4

Vishay Dale

DIMENSIONAL CONFIGURATIONS [Numbers in brackets indicate millimeters]

.060

.125 [3.17]

Point of Contact

.100

[2.54]

Typ.

Section J-J

.054 - .071 [1.37 - 1.80]

Card Thickness

R Typ.

[1.52]

.300 [7.62]

Depth of Insertion

.287

[7.29]

.250

[6.35]

Typ.

.430

[10.92]

Typ.

.610 [15.49]

Typ.

.050

[1.27]

T yp.

.342

[8.69]

Typ.

.060

[1.52]

Typ.

See table for contact and mounting variations

.180

[4.57]

Typ.

.365

[9.27]

Polarizing Key:

.150 [3.81]

When ordering polarizing keys individually, specify by the Model Number: PK-4 between contacts.

.200

[5.08]

# OF CONTACT POSITIONS PER SIDE A B C D E

10 1.835 [46.61] 1.575 [40.00] 1.100 [27.94] 1.260 [32.00] 1.150 [29.21] 12 2.035 [51.69] 1.775 [45.08] 1.300 [33.02] 1.460 [37.08] 1.350 [34.29] 15 2.335 [59.31] 2.075 [52.70] 1.600[40.64] 1.760 [44.70] 1.650 [41.91] 18 2.635 [66.93] 2.375 [60.32] 1.900 [48.26] 2.060 [52.32] 1.950 [49.53] 20 2.835 [72.01] 2.575 [65.40] 2.100 [53.34] 2.260 [57.40] 2.150 [54.61] 22 3.035 [77.09] 2.775 [70.48] 2.300 [58.42] 2.460 [62.48] 2.350 [59.69] 25 3.335 [84.71] 3.075 [78.10] 2.600 [66.04] 2.760 [70.10] 2.650 [67.31] 28 3.635 [92.33] 3.375 [85.72] 2.900 [73.66] 3.060 [77.72] 2.950 [74.93] 30 3.835 [97.41] 3.575 [90.80] 3.100 [78.74] 3.260 [82.80] 3.150 [80.01] 31 3.935 [99.95] 3.675 [93.34] 3.200 [81.28] 3.360 [85.34] 3.250 [82.55] 35 4.335 [110.11] 4.075 [103.50] 3.600 [91.44] 3.760 [95.50] 3.650 [92.71] 36 4.435 [112.65] 4.175 [106.04] 3.700 [93.98] 3.860 [98.04] 3.750 [95.25] 40 4.835 [122.81] 4.575 [116.20] 4.100 [104.14] 4.260 [108.20] 4.150 [105.41] 43 5.135 [130.43] 4.875 [123.82] 4.400 [111.76] 4.560 [115.82] 4.450 [113.03] 44 5.235 [132.97] 4.975 [126.36] 4.500 [114.30] 4.660 [118.36] 4.550 [115.57] 48 5.635 [143.13] 5.375 [136.52] 4.900 [124.46] 5.060 [128.52] 4.950 [125.73] 49 5.735 [145.67] 5.475 [139.06] 5.000 [127.00] 5.160 [131.06] 5.050 [128.27] 50 5.835 [148.21] 5.575 [141.60] 5.100 [129.54] 5.260 [133.60] 5.150 [130.81] 60 6.835 [173.61] 6.575 [167.00] 6.100 [154.94] 6.260 [159.00] 6.150 [156.21] 65 7.335 [186.31] 7.075 [179.70] 6.600 [167.64] 6.760 [171.70] 6.650 [168.91]

Hand insertion tool, TPK-4, provided upon request.

.295

[7.49]

.096 ± .002 [2.44 ± .051]

.031

[.787]

www.vishay.com 2

Document Number 36001

Revision 01-Nov-99

+ 1 hidden pages