![](/html/84/844c/844c01764162a74f9f2c80739d9f89d7ab420663de4c6559e4ba878884d9243c/bg1.png)
DSCC 03028
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
DSCC Qualified Type 03028
FEATURES
• US defense supply center approved
• Federal stock control number,
CAGE CODE 95275
• Small case size (0603)
• Stable BP, BR and BX dielectrics
• Excellent aging characteristics
• Lead (Pb)-free applied for “M” termination code
• Tin/lead “Z” termination code is available
• Surface-mount, precious metal technology, wet build
process
• Made with a combination of design, materials and tight
process control to achieve very high field reliability
Available
RoHS*
COMPLIANT
ELECTRICAL SPECIFICATIONS
Note: Electrical characteristics at + 25 °C unless otherwise specified
Operating Temperature: BP, BR, BX: - 55 °C to + 125 °C
Capacitance Range:
BP: = 0.5 pF to 1000 pF
BR: = 100 pF to 0.1 µF
BX: = 100 pF to 0.1 µF
Voltage Rating: 16 Vdc to 100 Vdc
Temperature Coefficient of Capacitance (TCC):
BP: = 0 ± 30 ppm/°C from - 55 °C to + 125 °C
with zero (0) Vdc applied
BP: = 0 ± 30 ppm/°C from - 55 °C to + 125 °C
with 100 % rated Vdc applied
BR: = ± 15 % from - 55 °C to + 125 °C
with zero (0) Vdc applied
BR: = + 15 %, - 40 % from - 55 °C to + 125 °C
with 100 % rated Vdc applied
BX: = ± 15 % from - 55 °C to + 125 °C
with zero (0) Vdc applied
BX: = + 15 %, - 25 % from - 55 °C to + 125 °C
with 100 % rated Vdc applied
Dissipation Factor (DF):
BP: 0.15 % max. at 1.0 V
0.15 % max. at 1.0 V
BR and BX: ≤ 25 V ± 3.5 % max. at 1.0 V
V ± 2.5 % max. at 1.0 V
Aging Rate:
BP: = 0 % maximum per decade
BR, BX: = 1 % maximum per decade
Insulation Resistance (IR):
At + 25 °C and rated voltage 100 000 MΩ minimum or
1000 ΩF, whichever is less
At + 125 °C and rated voltage 10 000 MΩ minimum or
100 ΩF, whichever is less
Dielectric Withstanding Voltage (DWV):
This is the maximum voltage the capacitors are tested for a
1 to 5 seconds period and the charge/discharge current does
not exceed 50 mA
≤ 200 Vdc: DWV at 250 % of rated voltage
and 1 MHz for values ≤ 1000 pF
rms
and 1 kHz for values > 1000 pF
rms
and 1 kHz ≥ 50
rms
and 1 kHz
rms
* Pb containing terminations are not RoHS compliant, exemptions may apply
www.vishay.com For technical questions, contact: mlcc.specials@vishay.com Document Number: 45043
142 Revision: 09-Jul-08
![](/html/84/844c/844c01764162a74f9f2c80739d9f89d7ab420663de4c6559e4ba878884d9243c/bg2.png)
DSCC 03028
Surface Mount Multilayer Ceramic Chip Capacitors
DIMENSIONS
PART ORDERING
NUMBER
03028-
ORDERING INFORMATION
LENGTH (L) WIDTH (W)
0.063 ± 0.005
[1.60 ± 0.12]
DSCC Qualified Type 03028
L
P
0.031 ± 0.005
[0.80 ± 0.12]
W
MAXIMUM
THICKNESS
(T)
0.035
[0.89]
T
MAX.
Vishay Vitramon
TERMINATION PAD (P)
MINIMUM MAXIMUM
0.012
[0.30]
0.018
[0.46]
03028- BX 102 B J Z - T
DSCC
NUMBER
CASE
SIZE
0603
Note:
(1)
DC voltage rating should not be exceeded in application
DIELECTRIC CAPACITANCE
NOMINAL CODE
BP
BR
BX
Expressed in
picofarads (pF).
The first two digits
are significant, the
third is a multiplier.
An “R” indicates a
decimal point.
Examples:
101 = 100 pF
1R8 = 1.8 pF
DC VOLTAGE
RATING
Y = 16 V
Z = 25 V
A = 50 V
B = 100 V
(1)
CAPACITANCE
TOLERANCE
C = ± 0.25 pF
D = ± 0.5 pF
F = ± 1 %
G = ± 2 %
H = ± 3 %
J = ± 5 %
K = ± 10 %
Note:
C, D < 10 pF (BP)
≥
10 pF (BP)
F, G , H
≥
10 pF
J, K
(BP, BR, BX)
TERMINATION GROUP C TESTING
OPTION
M = Palladium
silver
Z = Ni barrier
with tin/lead
plate min.
4 % lead
C = Full Group C
L = 2000 h life test only
M = 1000 h life test only
H = Low voltage humidity
test only
- = No group C testing
T = 7" Reel Plastic tape
C = 7" Reel Paper tape
J = 7" Reel (low quantity)
R = 11 1/4" Reel Plastic tape
P = 11 1/4" Reel Paper tape
B = Bulk
PA CK A GI N G
Document Number: 45043 For technical questions, contact: mlcc.specials@vishay.com
Revision: 09-Jul-08 143
www.vishay.com