• The Zener voltages are graded according to the
international E24 standard. Standard Zener
voltage tolerance is ± 5 %, indicated by the “C”
in the ordering code. Replace “C” with “B” for
2 % tolerance.
• The parameters are valid for both diodes in one
case. V
is 5 %
• AEC-Q101 qualified
• ESD capability according to AEC-Q101:
Human body model > 8 kV
Machine model > 800 V
• Base P/N-G3 - green, commercial grade
• Base P/N-HG3 - green, AEC-Q101 qualified
(part number available on request)
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
and Rzj of the two diodes in one case
Z
ORDERING INFORMATION
DEVICE NAMEORDERING CODETAPED UNITS PER REELMINIMUM ORDER QUANTITY
AZ23-G-series
AZ23C2V7-G3-08 to AZ23C51-G3-08
AZ23B2V7-G3-08 to AZ23B51-G3-08
AZ23C2V7-G3-18 to AZ23C51-G3-18
AZ23B2V7-G3-18 to AZ23B51-G3-18
3000 (8 mm tape on 7" reel)15 000
10 000 (8 mm tape on 13" reel)10 000
PACKAGE
PACKAGE NAMEWEIGHT
SOT-238.1 mgUL 94 V-0
ABSOLUTE MAXIMUM RATINGS (T
PARAMETERTEST CONDITIONSYMBOLVALUEUNIT
Power dissipation
Thermal resistance, junction
to ambient air
Junction temperature
Storage temperature range
Zener currentI
Operating temperature range
Device on fiberglass substrate,
Device on fiberglass substrate,
MOLDING COMPOUND
FLAMMABILITY RATING
= 25 °C, unless otherwise specified)
amb
see layout on page 6
see layout on page 6
MOISTURE SENSITIVITY
LEVEL
MSL level 1
(according J-STD-020)
P
tot
R
thJA
T
j
T
stg
Z
T
op
-65 to +150°C
-55 to +150°C
SOLDERING CONDITIONS
260 °C/10 s at terminals
300mW
420K/W
150°C
P
tot/VZ
mA
Rev. 1.4, 04-Mar-14
For technical questions within your region: DiodesAmericas@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
1
, DiodesAsia@vishay.com, DiodesEurope@vishay.com
Document Number: 85867
www.vishay.com
AZ23-G-Series
Vishay Semiconductors
ELECTRICAL CHARACTERISTICS (T
ZENER VOLTAGE
RANGE
VZ at I
ZT1
PART NUMBER
MARKING
CODE
= 25 °C, unless otherwise specified)
amb
(1)
TEST
CURRENT
I
ZT1
I
ZT2
REVERSE
VOLTAGE
VR at I
DYNAMIC
RESISTANCE
ZZ at I
R
ZT1ZZK
at I
TEMPERATURE
COEFFICIENT OF
ZENER VOLTAGE
ZT2
VZ at I
VmAVnA10-4/°C
MIN.NOM. MAX.MIN.MAX.
AZ23C2V7-GD412.52.72.951--75 (< 83)< 500-9-4
AZ23C3V0-GD422.83.03.251--80 (< 95)< 500-9-3
AZ23C3V3-GD433.13.33.551--80 (< 95)< 500-8-3
AZ23C3V6-GD443.43.63.851--80 (< 95)< 500-8-3
AZ23C3V9-GD453.73.94.151--80 (< 95)< 500-7-3
AZ23C4V3-GD4644.34.651--80 (< 95)< 500-6-1
AZ23C4V7-GD474.44.7551--70 (< 78)< 500-52
AZ23C5V1-GD484.85.15.451> 0.810030 (< 60)< 480-34
AZ23C5V6-GD495.25.6651> 110010 (< 40)< 400-26
AZ23C6V2-GD505.86.26.651> 21004.8 (< 10)< 200-17
AZ23C6V8-GD516.46.87.251> 31004.5 (< 8)< 15027
AZ23C7V5-GD5277.57.951> 51004 (< 7)< 5037
AZ23C8V2-GD537.78.28.751> 61004.5 (< 7)< 5047
AZ23C9V1-GD548.59.19.651> 71004.8 (< 10)< 5058
AZ23C10-GD559.41010.651> 7.51005.2 (< 15)< 7058
AZ23C11-GD5610.41111.651> 8.51006 (< 20)< 7059
AZ23C12-GD5711.41212.751> 91007 (< 20)< 9069
AZ23C13-GD5812.41314.151> 101009 (< 25)< 11079
AZ23C15-GD5913.81515.651> 1110011 (< 30)< 11079
AZ23C16-GD6015.31617.151> 1210013 (< 40)< 17089.5
AZ23C18-GD6116.81819.151> 1410018 (< 50)< 17089.5
AZ23C20-GD6218.82021.251> 1510020 (< 50)< 220810
AZ23C22-GD6320.82223.351> 1710025 (< 55)< 220810
AZ23C24-GD6422.82425.651> 1810028 (< 80)< 220810
AZ23C27-GD6525.12728.951> 2010030 (< 80)< 250810
AZ23C30-GD6628303251> 22.510035 (< 80)< 250810
AZ23C33-GD6731333551> 2510040 (< 80)< 250810
AZ23C36-GD6834363851> 2710040 (< 90)< 250810
AZ23C39-GD6937394151> 2910050 (< 90)< 3001012
AZ23C43-GD7040434651> 3210060 (< 100)< 7001012
AZ23C47-GD7144475051> 3510070 (< 100)< 7501012
AZ23C51-GD7248515051> 3810070 (< 100)< 7501012
Note
(1)
Tested with pulses tp = 5 ms
ZT
Rev. 1.4, 04-Mar-14
For technical questions within your region: DiodesAmericas@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000