Page 1
Aluminum Capacitors
4-Terminal, Tubular, Axial Lead
FEATURES
• 4-Terminal construction
• Very low impedance
604D
Vishay Sprague
Fig.1 Component outlines
QUICK REFERENCE DATA
DESCRIPTION VALUE
Nominal case size
Ø D x L in mm
Operating temperature - 55 °C to + 105 °C
Rated Capacitance range, C
Tolerance on C
Rated voltage range, U
Termination 4-terminal
Life validation test
2000 hours at 105 °C
Shelf life
500 hours at 105 °C
DC leakage current
I = K
cv
R
R
R
20.625 x 46.812
to 26.975 x 97.612
47 µF to 22 000 µF
- 10 %, + 50 %
5 WVDC to 200 WVDC
Δ CAP ± 15 % from initial
Δ
500 hours: C < 10 % from initial
Δ
measurement
ESR < 1.5 x initial specified limit
Δ DCL < initial specified limit
measurement
ESR < 1.2 x initial specified limit
Δ DCL < 2.0 x initial
specified limit
K is a constant: 0.5 at - 25 °C,
3.0 at + 105 °C
I in µA, C in µF, V in Volts
• Inductance limit 2nH
• Wide temperature range
• Available on special order - Call Buy/Resale Division for
part numbers and specifications
LOW TEMPERATURE PERFORMANCE
CAPACITANCE RATIO C - 55 °C/C + 25 °C MINIMUM at 120 Hz
Rated Voltage WVDC Capacitance Remaining
5 - 50 75 %
51 - up 80 %
ESR RATIO ESR - 55 °C/ESR + 25 °C MAXIMUM at 120 Hz
Rated Voltage WVDC Multiplier
5 - 50 12
51 - up 18
RIPPLE CURRENT MULTIPLIERS
For ripple current values contact the factory.
DIMENSIONS in millimeters
CASE
CODE
GJ 19.050 ± 0.787 41.275 ± 1.575 20.625 ± 0.787 46.812 6.350 ± 0.381
GL 19.050 ± 0.787 53.975 ± 1.575 20.625 ± 0.787 59.512 6.350 ± 0.381
GP 19.050 ± 0.787 66.675 ± 1.575 20.625 ± 0.787 72.212 6.350 ± 0.381
GS 19.050 ± 0.787 79.375 ± 1.575 20.625 ± 0.787 84.912 6.350 ± 0.381
GT 19.050 ± 0.787 92.075 ± 1.575 20.625 ± 0.787 97.612 6.350 ± 0.381
HJ 22.225 ± 0.787 28.575 ± 1.575 23.800 ± 0.787 34.112 7.620 ± 0.381
HL 22.225 ± 0.787 66.675 ± 1.575 23.800 ± 0.787 72.212 7.620 ± 0.381
HP 22.225 ± 0.787 53.975 ± 1.575 23.800 ± 0.787 59.512 7.620 ± 0.381
HS 22.225 ± 0.787 92.075 ± 1.575 23.800 ± 0.787 97.612 7.620 ± 0.381
HT 22.225 ± 0.787 79.375 ± 1.575 23.800 ± 0.787 84.912 7.620 ± 0.381
Document Number: 42040 For technical questions, contact: aluminumcaps4@vishay.com
Revision: 22-Nov-06 249
D L D L (max.) S
BARE
CASE
OUTER INSULATION WITH
POLYMER COATED END SEALS
LEAD
SPACING
www.vishay.com
Page 2
604D
Vishay Sprague
Aluminum Capacitors
4-Terminal, Tubular, Axial Lead
DIMENSIONS in millimeters
CASE
CODE
JJ 25.400 ± 0.787 41.275 ± 1.575 26.975 ± 0.787 46.812 10.160 ± 0.381
JL 25.400 ± 0.787 53.975 ± 1.575 26.975 ± 0.787 59.512 10.160 ± 0.381
JP 25.400 ± 0.787 66.675 ± 1.575 26.975 ± 0.787 72.212 10.160 ± 0.381
JS 25.400 ± 0.787 79.375 ± 1.575 26.975 ± 0.787 84.912 10.160 ± 0.381
JT 25.400 ± 0.787 92.075 ± 1.575 26.975 ± 0.787 97.612 10.160 ± 0.381
D L D L (max.) S
BARE
CASE
DIMENSIONS AND AVAILABLE FORMS
C
L
+1
2.5
D
TYP.
- 0
OUTER INSULATION WITH
POLYMER COATED END SEALS
L
PVC Sleeve
0.040 DIA. (No. 18 AWG)
TINNED COPPER
LEAD
SPACING
0.040
1.016
ELECTRICAL DATA
SYMBOL DESCRIPTION
µF rated capacitance
± % F = 10 %, + 50 %
DC voltage rating at 105 °C
GJ see dimensions in millimeters table
7 termination
Diameter (No. 18 AWG) - Case Diameter G,H,J
ORDERING EXAMPLE*
Electrolytic capacitor 604D series
604D 272 F 005 GJ 7
Nominal case size: ∅ 20.625 × 46.812 mm
* Note: For lead (Pb)-free / RoHS compliant products add
suffix “E3” to part number
Example: 604D272F005GJ7E3
www.vishay.com For technical questions, contact: aluminumcaps4@vishay.com Document Number: 42040
250 Revision: 22-Nov-06
Page 3
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Loading...