VISHAY 440L, 30LV, 30LVS, 25Y, 125L Technical data
...
查询125L供应商
440L, 30LV, 30LVS, 25Y, 125L, 20VL Series
Vishay Cera-Mite
AC Line Rated Disc Capacitors
X & Y EMI/RFI FILTER TYPES: ACROSS-THE-LINE,
LINE-BY-PASS, ANTENNA COUPLING
Vishay Cera-Mite AC Line Rated Discs are rugged, high voltage capacitors specifi cally designed and tested
for use on 125 Volt through 600 Volt AC power sources. Certifi ed to meet demanding X & Y type worldwide
safety agency requirements, they are applied in across-the-line, line-to-ground, and line-by-pass
fi ltering applications. Vishay Cera-Mite offers the most
complete selection in the industry—six product families—
exactly tailored to your needs.
• Worldwide Safety Agency Recognition
- Underwriters Laboratories - UL1414 & UL1283
- Canadian Standards Association - CSA 22.2 No. 1 & No. 8
- European EN132400 to IEC 384-14 Second Edition
• Required In AC Power Supply and Filter Applications
• Six Families Tailored To Specific Industry Requirements
• Complete Range of Capacitance Values
SAFETY AGENCY RECOGNITION AND EMI/RFI FILTERING SUBCLASS
Series / Recognition / Voltage 440L 30LV 30LVS 25Y 125L 20VL
Underwriters Laboratories Inc.: (Note 2)
UL 1414 Across-The-Line Across-The-Line Across-The-Line — — — —
UL 1414 Antenna Coupling Antenna-Coupling Antenna-Coupling — — — —
UL 1414 Line-By-Pass Line-By-Pass Line-By-Pass Line-By-Pass Line-By-Pass Line-By-Pass —
UL 1414 Rated Voltage 250 VAC 250 VAC 250 VAC 250 VAC 250 VAC —
Electromagnetic Interference Filters EMI Filters EMI Filters EMI Filters EMI Filters — EMI Filters
UL1283 Rated Voltage 600 VAC 250 VAC 250 VAC 250 VAC — 250 VAC
Canadian Standards Association:
CSA 22.2 No.1 Across-The-Line Across-The-Line Across-The-Line — — — —
CSA 22.2 No.1 Isolation Isolation Isolation Isolation Isolation Isolation —
CSA 22.2 No. 1 Rated Voltage 250 VAC 250 VAC 250 VAC 250 VAC 125/250 VAC —
CSA 22.2 No. 8 Line-to-Ground Capacitors — Line-To-Ground Line-To-Ground Line-To-Ground — Line-To-Ground
For Use in Certified EMI Filters —
CSA 22.2 No. 8 Rated Voltage — 400 VAC 400 VAC 400 VAC — 250 VAC
European CENELEC Electronic Components Committee (CECC) EN 132 400 to Publication IEC 384-14 Table II, Edition 2:
IEC 384 -14 Second Edition Subclass Y: (Note 3) Y1 Y2 Y2 Y2 Y4 —
Subclass Y Voltage (Vrms 50-60 Hz) 500 VAC 300 VAC 250 VAC 250 VAC 125 VAC
Type of Insulation Bridged Double or Basic or Basic or Basic or Basic or —
Reinforced Supplementary Supplementary Supplementary Supplementary
Peak Impulse Voltage Before Endurance Test 8 kV 5 kV 5 kV 5 kV 2.5 kV —
IEC 384-14 Second Edition Subclass X: (Note 4) X1 X1 X1 X1 X1 X2
Subclass X Voltage (Vrms 50-60 Hz) 400 VAC 400 VAC 400 VAC 400 VAC 400 VAC 400 VAC
Peak Impulse Voltage in Service 2.5 to 4.0 kV 2.5 to 4.0 kV 2.5 to 4.0 kV 2.5 to 4.0 kV 2.5 to 4.0 kV To 2.5 kV
Application High Pulse High Pulse High Pulse High Pulse High Pulse Gen. Purpose
Damp Heat, Steady State Recognition Code HKF - 25°C/ + 125°C/21 days
Note 1
Voltage Ratings: All ratings are manufacturer’s
rating.
• Part markings are governed by agency
rules and customer requirements.
• Parts are marked 250 VAC unless otherwise
requested.
Note 2
UL1414 Across-The-Line, Antenna Coupling, and
Line-By-Pass Capacitors:
• Across-The-Line—A capacitor connected
either across a supply circuit or between
one side of a supply circuit and a conductive
part that may be connected to earth ground.
• Antenna-Coupling—A capacitor connected
from an antenna terminal to circuits within an
appliance.
• Line-By-Pass—A capacitor connected between
one side of a supply circuit and an accessible
conductive part.
www.vishay.com
20
Note 3
IEC 384-14 Subclass Y Capacitors:
• A capacitor of a type suitable for use in situations
where failure of the capacitor could lead to
danger of electric shock.
• Class Y capacitors are divided into sub- classes
based on type of insulation bridged and voltage
ranges.
• For definitions of basic, supplementary,
double and reinforced insulation, see IEC
Publication 536.
• Subclass Y capacitors may be used in
applications which require a Subclass
X rating.
Note 4
IEC 384-14 Subclass X Capacitors:
• A capacitor of a type suitable for use
in situations where failure of the capacitor
would not lead to danger of electric
shock.
ceramite.support@vishay.com
AC LINE RATED CERAMIC CAPACITOR SPECIFICATIONS
PERFORMANCE DATA / SERIES: 440L 30LV 30LVS 25Y 125L 20VL
Application Voltage Range
(Vrms 50/60 Hz) (Note 1)
Dielectric Strength
(Vrms 50/60 H
Dissipation Factor (Maximum) 2%
Insulation Resistance (Minimum) 1000 ΩF
Mechanical Data Service Temperature 125°C Maximum;
Coating Material per UL94V0
Temperature Characteristics Y5U Y5U Y5U Y5S Y5V Y5V
Certified EMI Filters Certified EMI Filters Certified EMI Filters — Certified EMI Filters
Z
for 1 minute)
250/500 300/400 250/400 250/400 250 250
4000 2500 2500 2500 2000 1250
See Part Number Detail for Temperature Characteristics
• Class X capacitors are divided into subclasses
according to the peak impulse test voltage
superimposed on the main voltage
Note 5
AC Leakage Current:
• For all Series (except 125L) - AC Leakage
Current (mA) specifi ed at 250 Vrms, 60 Hz.
• For 125L Series - AC Leakage Current
(mA) specifi ed at 125 Vrms, 60Hz.
Note 6
Alternate Lead Spacings of 7.5mm and 10mm
are available bulk or tape & reel.
• European Required Minimum Lead Clearance
(Prevents Use of Inside Crimp) .315" (8mm) on
440L Series; 0.118" (3mm) on all other series.
Document Number: 23092
Revision 14-May-02
440L, 30LV, 30LVS, 25Y, 125L, 20VL Series
AC Line Rated Disc Capacitors
INTERNATIONAL AGENCY APPROVALS
Fig 5
TYPICAL FILTER SHOWING X & Y TYPES
L
1
Up to
250 VAC
L
2
Y
X
I
L
I
Y
L
IL = AC Leakage Current
440L SERIES
AC RATED CERAMIC DISC CAPACITORS
Rugged, High Dielectric Strength, Full UL Recognition,
X1 & Y1 Applications
UL 1414 UL 1283 CSA 22.2 IEC 384-14
Across-The-Line EMI Filters No. 1 - Across-The-Line 2nd Edition
Antenna Coupling No. 1 - Isolation Y1 - 500 VAC
Line-By -Pass X1 - 400 VAC
VALUE CERA-MITE
pF TOL NUMBER I
15 K 440LQ15 2.0 uA U2J .330 (8.4) .210 (5.3) .375 (9.5) 20 .032 (.81)
22 K 440LQ22 3.0 uA P3K .330 (8.4) .190 (4.8) .375 (9.5) 20 .032 (.81)
33 K 440LQ33 4.4 uA R3L .330 (8.4) .200 (5.1) .375 (9.5) 20 .032 (.81)
47 K 440LQ47 6.3 uA R3L .330 (8.4) .180 (4.6) .375 (9.5) 20 .032 (.81)
68 K 440LQ68 0.01 X7R .330 (8.4) .220 (5.6) .375 (9.5) 20 .032 (.81)
100 K 440LT10 0.02 X7R .330 (8.4) .220 (5.6) .375 (9.5) 20 .032 (.81)
150 K 440LT15 0.03 X7R .330 (8.4) .235 (6.0) .375 (9.5) 20 .032 (.81)
220 K 440LT22 0.04 X7R .330 (8.4) .235 (6.0) .375 (9.5) 20 .032 (.81)
330 K 440LT33 0.05 X7R .330 (8.4) .225 (5.7) .375 (9.5) 20 .032 (.81)
470 M 440LT47 0.07 Y5U .330 (8.4) .230 (5.8) .375 (9.5) 20 .032 (.81)
560 M 440LT56 0.08 Y5U .330 (8.4) .230 (5.8) .375 (9.5) 20 .032 (.81)
680 M 440LT68 0.10 Y5U .330 (8.4) .235 (6.0) .375 (9.5) 20 .032 (.81)
1000 M 440LD10 0.15 Y5U .365 (9.3) .220 (5.6) .375 (9.5) 20 .032 (.81)
1500 M 440LD15 0.23 Y5U .365 (9.3) .220 (5.6) .375 (9.5) 20 .032 (.81)
2000 M 440LD20 0.30 Y5U .400 (10.2).220 (5.6) .375 (9.5) 20 .032 (.81)
2200 M 440LD22 0.34 Y5U .430 (10.9).225 (5.7) .375 (9.5) 20 .032 (.81)
2700 M 440LD27 0.41 Y5U .460 (11.7).225 (5.7) .375 (9.5) 20 .032 (.81)
2800 M 440LD28 0.43 Y5U .460 (11.7).220 (5.6) .375 (9.5) 20 .032 (.81)
3000 M 440LD30 0.46 Y5U .490 (12.4).225 (5.7) .375 (9.5) 20 .032 (.81)
3200 M 440LD32 0.49 Y5U .490 (12.4).220 (5.6) .375 (9.5) 20 .032 (.81)
3300 M 440LD33 0.50 Y5U .490 (12.4).215 (5.5) .375 (9.5) 20 .032 (.81)
3900 M 440LD39 0.59 Y5U .530 (13.5).220 (5.6) .375 (9.5) 20 .032 (.81)
4000 M 440LD40 0.61 Y5U .530 (13.5).220 (5.6) .375 (9.5) 20 .032 (.81)
4700 M 440LD47 0.71 Y5U .620 (15.7).230 (5.8) .375 (9.5) 20 .032 (.81)
5000 M 440LD50 0.76 Y5U .620 (15.7).225 (5.7) .375 (9.5) 20 .032 (.81)
5500 M 440LD55 0.84 Y5U .680 (17.3).230 (5.8) .375 (9.5) 20 .032 (.81)
5600 M 440LD56 0.85 Y5U .680 (17.3).230 (5.8) .375 (9.5) 20 .032 (.81)
6800 M 440LD68 1.04 Y5U .720 (18.3).235 (6.0) .375 (9.5) 20 .032 (.81)
8000 M 440LD80 1.22 Y5U .720 (18.3).220 (5.6) .375 (9.5) 20 .032 (.81)
9000 M 440LD90 1.37 Y5U .790 (20.1).225 (5.7) .375 (9.5) 20 .032 (.81)
.01µF M 440LS10 1.52 Y5U .850 (21.6).230 (5.8) .375 (9.5) 20 .032 (.81)
Note 5 Note 6
Fig 7 Optional 3-Leaded Style
An optional 3-leaded construction is available. It consists of a single
capacitor with the two outside leads attached to one electrode, and
the center lead attached to the other electrode. Used in feed-thru or
line-to-ground applications, it allows a short ground lead for enhanced
high frequency performance.
VISHAY AC D T LS Φ
LEAKAGE
TEMP DIAMETER THICKNESS LEAD SPACE WIRE SIZE
mA CHAR. (i n/mm) (in/mm) (in/mm) (AWG/in/mm)
L
10 K 440LQ10 1.3 uA COG .330 (8.4) .195 (5.0) .375 (9.5) 20 .032 (.81)
Fig 6
D
max
0.125"
max (3.2)
30LV SERIES
AC RATED CERAMIC DISC CAPACITORS
Full UL 1414 Recognition, X1 & Y2 Applications
UL 1414 UL 1283 CSA 22.2 IEC 384-14
Across-The-Line EMI Filters No. 1 - Across-The-Line 2nd Edition
Antenna Coupling No. 1 - Isolation Y2 - 300 VAC
Line-By -Pass No. 8 - EMI Filters X1 - 400 VAC
VISHAY AC D T LS F
VALUE CERA-MITE LEAKAGE TEMP DIAMETER THICKNESS LEAD SPACE WIRE SIZE
pF TOL. NUMBER I
10 K 30LVQ10 1.3 uA COG .330 (8.4) .185 (4.7) .250 (6.4) 22 .025 (.64)
15 K 30LVQ15 2.0 uA U2J .330 (8.4) .200 (5.1) .250 (6.4) 22 .025 (.64)
22 K 30LVQ22 3.0 uA P3K .330 (8.4) .180 (4.6) .250 (6.4) 22 .025 (.64)
33 K 30LVQ33 4.4 uA R3L .330 (8.4) .190 (4.8) .250 (6.4) 22 .025 (.64)
47 K 30LVQ47 6.3 uA R3L .330 (8.4) .170 (4.3) .250 (6.4) 22 .025 (.64)
68 K 30LVQ68 0.01 S3L .330 (8.4) .175 (4.4) .250 (6.4) 22 .025 (.64)
100 K 30LVT10 0.02 X7R .330 (8.4) .180 (4.6) .250 (6.4) 22 .025 (.64)
150 K 30LVT15 0.03 X7R .330 (8.4) .180 (4.6) .250 (6.4) 22 .025 (.64)
220 K 30LVT22 0.04 X7R .330 (8.4) .195 (5.0) .250 (6.4) 22 .025 (.64)
330 K 30LVT33 0.05 X7R .330 (8.4) .195 (5.0) .250 (6.4) 22 .025 (.64)
470 K 30LVT47 0.08 X7R .330 (8.4) .180 (4.6) .250 (6.4) 22 .025 (.64)
560 K 30LVT56 0.09 X7R .330 (8.4) .200 (5.1) .250 (6.4) 22 .025 (.64)
680 K 30LVTT68 0.11 X7R .330 (8.4) .180 (4.6) .250 (6.4) 22 .025 (.64)
680 M 30LVT68 0.10 Y5U .330 (8.4) .220 (5.6) .250 (6.4) 22 .025 (.64)
1000 K 30LVTD10 0.16 X7R .365 (9.3) .185 (4.7) .250 (6.4) 22 .025 (.64)
1000 M 30LVD10 0.15 Y5U .330 (8.4) .215 (5.5) .250 (6.4) 22 .025 (.64)
1500 K 30LVTD15 0.24 X7R .460 (11.7) .180 (4.6) .250 (6.4) 22 .025 (.64)
1500 M 30LVD15 0.23 Y5U .330 (8.4) .195 (5.0) .250 (6.4) 22 .025 (.64)
2000 M 30LVD20 0.31 Y5U .400 (10.2) .210 (5.3) .250 (6.4) 22 .025 (.64)
2200 M 30LVD22 0.34 Y5U .400 (10.2) .200 (5.1) .250 (6.4) 22 .025 (.64)
2700 M 30LVD27 0.41 Y5U .430 (10.9) .200 (5.1) .250 (6.4) 22 .025 (.64)
2800 M 30LVD28 0.43 Y5U .430 (10.9) .200 (5.1) .250 (6.4) 22 .025 (.64)
3000 M 30LVD30 0.46 Y5U .460 (11.7) .205 (5.2) .250 (6.4) 22 .025 (.64)
3200 M 30LVD32 0.49 Y5U .460 (11.7) .200 (5.1) .250 (6.4) 22 .025 (.64)
3300 M 30LVD33 0.50 Y5U .460 (11.7) .195 (5.0) .250 (6.4) 22 .025 (.64)
3900 M 30LVD39 0.59 Y5U .490 (12.4) .200 (5.1) .250 (6.4) 22 .025 (.64)
4000 M 30LVD40 0.61 Y5U .530 (13.5) .210 (5.3) .250 (6.4) 22 .025 (.64)
4700 M 30LVD47 0.72 Y5U .620 (15.7) .220 (5.6) .375 (9.5) 20 .032 (.81)
5000 M 30LVD50 0.76 Y5U .620 (15.7) .215 (5.5) .375 (9.5) 20 .032 (.81)
5500 M 30LVD55 0.84 Y5U .560 (14.2) .195 (5.0) .375 (9.5) 20 .032 (.81)
5600 M 30LVD56 0.85 Y5U .560 (14.2) .195 (5.0) .375 (9.5) 20 .032 (.81)
6800 M 30LVD68 1.04 Y5U .680 (17.3) .205 (5.2) .375 (9.5) 20 .032 (.81)
8000 M 30LVD80 1.22 Y5U .680 (17.3) .195 (5.0) .375 (9.5) 20 .032 (.81)
9000 M 30LVD90 1.37 Y5U .720 (18.3) .200 (5.1) .375 (9.5) 20 .032 (.81)
.01µF M 30LVS10 1.52 Y5U .790 (20.1) .190 (4.8) .375 (9.5) 20 .032 (.81)
.015µF
Note 5 Note 6
Vishay Cera-Mite
WIRE LEAD OFFSET
1.250" min (32)
Tinned Copper Leads
mA CHAR. (i n/m m) (in/mm) (in/mm) (AWG/in/mm)
L
M 30LVS15* 2.28 Y5U .900 (22.9) .200 (5.1) .375 (9.5) 20 .032 (.81)
D
max
1.250" min (32)
LO
LS
T
max
* 30LVS15 not available with UL 1414 recognition.
a
G
b
4mm max
T
Series "LO" typ.
in mm
440L .158" (4.0)
30LV .132" (3.4)
30LVS .125" (3.2)
25Y .060" (1.5)
125L .110" (2.8)
20VL .077" (2.0)
LS
G
a
b
c
Document Number: 23092
Revision 14-May-02
ceramite.support@vishay.com
www.vishay.com
21
Loading...