Vishay 209CNQ...PbF Series Data Sheet

TO-2 44

PRODUCT SUMMARY

I

F(AV)

V

R

Schottky Rectifier, 200 A

FEATURES

Lug
terminal
anode 1

Base common cathode

200 A

135/150 V

terminal
anode 2

Lug

• 175 °C TJ operation

• Center tap module

• Low forward voltage drop

• High frequency operation

• Guard ring for enhanced ruggedness and long term
reliability

• Lead (Pb)-free

• Designed and qualified for industrial level

DESCRIPTION

The 209CNQ center tap Schottky rectifier module series has
been optimized for low reverse leakage at high temperature.
The proprietary barrier technology allows for reliable
operation up to 175 °C junction temperature. Typical
applications are in high current switching power supplies,
plating power supplies, UPS systems, converters,
freewheeling diodes, welding, and reverse battery
protection.

209CNQ...PbF Series

Vishay High Power Products

RoHS

COMPLIANT

MAJOR RATINGS AND CHARACTERISTICS

SYMBOL CHARACTERISTICS VALUES UNITS

I

F(AV)

V

RRM

I

FSM

V

F

T

J

Rectangular waveform 200 A

Range 135/150 V

tp = 5 µs sine 10 000 A

100 Apk, TJ = 125 °C (per leg) 0.71 V

Range - 55 to 175 °C

VOLTAGE RATINGS

PARAMETER SYMBOL 209CNQ135PbF 209CNQ150PbF UNITS

Maximum DC reverse voltage V

Maximum working peak reverse voltage V

R

RWM

135 150 V

ABSOLUTE MAXIMUM RATINGS

PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS

Maximum average
forward current
See fig. 5

Maximum peak one cycle non-repetitive
surge current per leg
See fig. 7

Non-repetitive avalanche energy per leg E

Repetitive avalanche current per leg I

per leg

per device 200

I

F(AV)

I

FSM

AR

50 % duty cycle at TC = 131 °C, rectangular waveform

5 µs sine or 3 µs rect. pulse

10 ms sine or 6 ms rect. pulse 1200

TJ = 25 °C, IAS = 5.5 A, L = 1 mH 15 mJ

AS

Current decaying linearly to zero in 1 µs
Frequency limited by T

maximum VA = 1.5 x VR typical

J

Following any rated
load condition and with
rated V

RRM

applied

100

A

10 000

1A

Document Number: 94156 For technical questions, contact: [e-mail]
Revision: 28-Apr-08 1

www.vishay.com

209CNQ...PbF Series

Vishay High Power Products

Schottky Rectifier, 200 A

ELECTRICAL SPECIFICATIONS

PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS

100 A
Maximum forward
voltage drop per leg
See fig. 1

V

FM

200 A 1.33

(1)

100 A

200 A 0.88

Maximum reverse leakage
current per leg

I

RM

See fig. 2

Maximum junction capacitance per leg C

Typical series inductance per leg L

T

S

TJ = 25 °C

(1)

= 125 °C 45

T

J

VR = 5 VDC (test signal range 100 kHz to 1 MHz) 25 °C 3000 pF

From top of terminal hole to mounting plane 7.0 nH

Maximum voltage rate of change dV/dt Rated V

T

= 25 °C

J

= 125 °C

T

J

= Rated V

V

R

R

R

1.06

0.74

3

10 000 V/µs

Note

(1)

Pulse width < 300 µs, duty cycle < 2 %

THERMAL - MECHANICAL SPECIFICATIONS

PARAMETER SYMBOL MIN. TYP. MAX. UNITS

Maximum junction and storage temperature range T

Thermal resistance, junction to case

per leg

Thermal resistance, case to heatsink R

, T

J

Stg

R

thJC

thCS

Weight -

Mounting torque 35.4 (4) - 53.1 (6)

Mounting torque center hole 30 (3.4) - 40 (4.6)

Terminal torque 30 (3.4) - 44.2 (5)

Vertical pull - - 80

2" lever pull - - 35

- 55 - 175 °C

- - 0.38

-0.10-

68

2.4 oz.

-

lbf ⋅ in

(N ⋅ m)

lbf ⋅ in

V

mA

°C/Wper module - - 0.19

g

www.vishay.com For technical questions, contact: [e-mail]

Document Number: 94156

2 Revision: 28-Apr-08

209CNQ...PbF Series

1000

100

Current (A)

10

- Instantaneous Forward

F

I

1

0 1.0 2.0

0.5 1.5

V

- Forward Voltage Drop (V)

FM

Schottky Rectifier, 200 A

TJ = 150 °C

= 125 °C

T

J

= 25 °C

T

J

- Reverse Current (mA)

R

I

Vishay High Power Products

1000

TJ = 175 °C

100

10

1

0.1

0.01

0.001

TJ = 25 °C

0 30 150

V

TJ = 100 °C

TJ = 75 °C

TJ = 50 °C

60 90

- Reverse Voltage (V)

R

TJ = 150 °C

TJ = 125 °C

120

Fig. 1 - Maximum Forward Voltage Drop Characteristics Fig. 2 - Typical Values of Reverse Current vs.

Reverse Voltage

10 000

1000

TJ = 25 °C

- Junction Capacitance (pF)

T

C

100

0 60 90 120

30

VR - Reverse Voltage (V)

Fig. 3 - Typical Junction Capacitance vs.

Reverse Voltage

1

0.1

D = 0.75
D = 0.50

0.01

Single pulse

(thermal resistance)

- Thermal Impedance (°C/W)

thJC

Z

0.001

0.00001 0.0001 0.001 0.01 0.1 1 10

D = 0.33
D = 0.25
D = 0.20

t1 - Rectangular Pulse Duration (s)

Fig. 4 - Maximum Thermal Impedance Z

Characteristics

thJC

Document Number: 94156 For technical questions, contact: [e-mail]

www.vishay.com

Revision: 28-Apr-08 3

209CNQ...PbF Series

Vishay High Power Products

200

180

160

140

120

Square wave (D = 0.50)
80 % rated V

100

80

Allowable Case Temperature (°C)

See note (1)

60

20 100 120

0 16060

I

F(AV)

applied

R

40 14080

- Average Forward Current (A)

Fig. 5 - Maximum Allowable Case Temperature vs.

Average Forward Current

DC

10 000

Schottky Rectifier, 200 A

120

100

Average Power Loss (W)

D = 0.20
D = 0.25
D = 0.33
D = 0.50

80

60

40

20

0

0

D = 0.75

DC

60 150

- Average Forward Current (A)

I

F(AV)

30

90

RMS limit

120

Fig. 6 - Forward Power Loss Characteristics

1000

At any rated load condition
and with rated V applied

100

following surge

10

- Non-Repetitive Surge Current (A)

FSM

I

tp - Square Wave Pulse Duration (µs)

Fig. 7 - Maximum Non-Repetitive Surge Current

D.U.T.

Current
monitor

IRFP460

= 25 Ω

R

g

Fig. 8 - Unclamped Inductive Test Circuit

RRM

100

L

1000

High-speed

switch

Freewheel

diode

40HFL40S02

10 000

V

+

= 25 V

d

Note

(1)

Formula used: TC = TJ - (Pd + Pd
Pd = Forward power loss = I
Pd

= Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated V

REV

F(AV)

) x R

REV

x VFM at (I

;

thJC

/D) (see fig. 6);

F(AV)

R

www.vishay.com For technical questions, contact: [e-mail]

Document Number: 94156

4 Revision: 28-Apr-08

209CNQ...PbF Series

Schottky Rectifier, 200 A

Vishay High Power Products

ORDERING INFORMATION TABLE

Device code

Dimensions http://www.vishay.com/doc?95021

20 9 C N Q 150 PbF

51324

1 - Average current rating (x 10)

2 - Product silicon identification

3 - C = Circuit configuration

4 - N = Not isolated

5 - Q = Schottky rectifier diode

6 - Voltage ratings

7 - Lead (Pb)-free

LINKS TO RELATED DOCUMENTS

67

135 = 135 V
150 = 150 V

Document Number: 94156 For technical questions, contact: [e-mail]
Revision: 28-Apr-08 5

www.vishay.com

DIMENSIONS in millimeters (inches)

3

2

3

1

Ø 5.2 (Ø 0.20)

9.6 (0.37) MIN.

93 (3.66) MAX.

¼" - 20 UNC

80 (3.15)

13 (0.51)

35 (1.37) REF.

7 (0.27)
6 (0.23)

17.5 (0.69)

16.5 (0.65)

21 (0.82)
20 (0.78)

Ø 7.2 (Ø 0.28)

(2 places)

12.6 (0.5)

Outline Dimensions

Vishay Semiconductors

TO-244

Document Number: 95021 For technical questions, contact: [e-mail]
Revision: 25-Jun-07 1

www.vishay.com

Legal Disclaimer Notice

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Document Number: 91000 www.vishay.com
Revision: 11-Mar-11 1