TO-2 44
PRODUCT SUMMARY
I
F(AV)
V
R
Schottky Rectifier, 200 A
FEATURES
Lug
terminal
anode 1
Base common cathode
200 A
45 V
terminal
anode 2
Lug
• 150 °C TJ operation
• Center tap module
• Low forward voltage drop
• High frequency operation
• Guard ring for enhanced ruggedness and long term
reliability
• Lead (Pb)-free (“PbF” suffix)
• Designed and qualified for industrial level
DESCRIPTION
The 200CNQ... center tap Schottky rectifier module series
has been optimized for low reverse leakage at high
temperature. The proprietary barrier technology allows
for reliable operation up to 150 °C junction temperature.
Typical applications are in high current switching power
supplies, plating power supplies, UPS systems, converters,
freewheeling diodes, welding, and reverse battery
protection.
200CNQ045PbF
Vishay High Power Products
RoHS
COMPLIANT
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL CHARACTERISTICS VALUES UNITS
I
F(AV)
V
RRM
I
FSM
V
F
T
J
Rectangular waveform 200 A
45 V
tp = 5 µs sine 26 000 A
100 Apk, TJ = 125 °C (per leg) 0.52 V
Range - 55 to 150 °C
VOLTAGE RATINGS
PARAMETER SYMBOL 200CNQ045PbF UNITS
Maximum DC reverse voltage V
Maximum working peak reverse voltage V
R
RWM
45 V
ABSOLUTE MAXIMUM RATINGS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum average
forward current
See fig. 5
Maximum peak one cycle
non-repetitive surge current per leg
See fig. 7
Non-repetitive avalanche energy per leg E
Repetitive avalanche current per leg I
per leg
I
per device 200
F(AV)
I
FSM
AR
50 % duty cycle at TC = 116 °C, rectangular waveform
5 µs sine or 3 µs rect. pulse
10 ms sine or 6 ms rect. pulse 1550
TJ = 25 °C, IAS = 17 A, L = 1 mH 135 mJ
AS
Current decaying linearly to zero in 1 µs
Frequency limited by T
maximum VA = 1.5 x VR typical
J
Following any rated
load condition and with
rated V
RRM
applied
100
26 000
20 A
A
A
Document Number: 94153 For technical questions, contact: ind-modules@vishay.com
Revision: 28-Apr-08 1
www.vishay.com
200CNQ045PbF
Vishay High Power Products
Schottky Rectifier, 200 A
ELECTRICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
100 A
Maximum forward
voltage drop per leg
See fig. 1
V
FM
200 A 0.73
(1)
100 A
200 A 0.69
Maximum reverse
leakage current per leg
I
RM
See fig. 2
Threshold voltage V
Forward slope resistance r
Maximum junction capacitance per leg C
Typical series inductance per leg L
F(TO)
t
T
S
TJ = 25 °C
(1)
= 125 °C 800
T
J
TJ = TJ maximum
VR = 5 VDC (test signal range 100 kHz to 1 MHz) 25 °C 5200 pF
From top of terminal hole to mounting plane 7.0 nH
Maximum voltage rate of change dV/dt Rated V
T
= 25 °C
J
= 125 °C
T
J
= Rated V
V
R
R
R
0.55
0.52
10
0.27 V
2.0 mΩ
10 000 V/µs
Note
(1)
Pulse width < 300 µs, duty cycle < 2 %
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL MIN. TYP. MAX. UNITS
Maximum junction and storage temperature range T
Thermal resistance, junction to case
per leg
Thermal resistance, case to heatsink R
Weight -
Mounting torque 35.4 (4) - 53.1 (6)
Mounting torque center hole 30 (3.4) - 40 (4.6)
Terminal torque 30 (3.4) - 44.2 (5)
Vertical pull - - 80
2" lever pull - - 35
, T
J
Stg
R
thJC
thCS
- 55 - 150 °C
- - 0.38
-0.10-
68
2.4 oz.
-
lbf ⋅ in
(N ⋅ m)
lbf ⋅ in
V
mA
°C/Wper module - - 0.19
g
www.vishay.com For technical questions, contact: ind-modules@vishay.com
Document Number: 94153
2 Revision: 28-Apr-08
200CNQ045PbF
Schottky Rectifier, 200 A
1000
TJ = 150 °C
100
= 125 °C
T
Current (A)
10
- Instantaneous Forward
F
I
1
0 0.4 0.8 1.2
0.2 0.6 1.0
V
- Forward Voltage Drop (V)
FM
Fig. 1 - Maximum Forward Voltage Drop Characteristics
(Per Leg)
J
= 25 °C
T
J
10 000
Vishay High Power Products
10 000
1000
100
10
1
- Reverse Current (mA)
R
0.1
I
0.01
0102030 45
Fig. 2 - Typical Values of Reverse Current vs.
TJ = 25 °C
51525
V
- Reverse Voltage (V)
R
Reverse Voltage (Per Leg)
TJ = 150 °C
TJ = 125 °C
TJ = 100 °C
TJ = 75 °C
TJ = 50 °C
4035
TJ = 25 °C
- Junction Capacitance (pF)
T
C
1000
0 20304050
10
VR - Reverse Voltage (V)
Fig. 3 - Typical Junction Capacitance vs.
Reverse Voltage (Per Leg)
1
0.1
D = 0.75
D = 0.50
D = 0.33
0.01
Single pulse
(thermal resistance)
D = 0.25
D = 0.20
- Thermal Impedance (°C/W)
thJC
Z
0.001
0.00001 0.0001 0.001 0.01 0.1 1 10
t1 - Rectangular Pulse Duration (s)
Fig. 4 - Maximum Thermal Impedance Z
Characteristics (Per Leg)
thJC
Document Number: 94153 For technical questions, contact: ind-modules@vishay.com
www.vishay.com
Revision: 28-Apr-08 3
200CNQ045PbF
Vishay High Power Products
160
150
140
130
Square wave (D = 0.50)
120
80 % rated V
110
Allowable Case Temperature (°C)
See note (1)
100
0 16060
20 100 120
I
F(AV)
applied
R
40 140
- Average Forward Current (A)
Fig. 5 - Maximum Allowable Case Temperature vs.
Average Forward Current (Per Leg)
DC
80
100 000
Schottky Rectifier, 200 A
Average Power Loss (W)
Fig. 6 - Forward Power Loss Characteristics (Per Leg)
At any rated load condition
and with rated V applied
following surge
RRM
90
D = 0.20
D = 0.25
D = 0.33
60
30
0
0
D = 0.50
D = 0.75
DC
60 150
- Average Forward Current (A)
I
F(AV)
30
90
RMS limit
120
10 000
- Non-Repetitive Surge Current (A)
1000
FSM
I
10
tp - Square Wave Pulse Duration (µs)
Fig. 7 - Maximum Non-Repetitive Surge Current (Per Leg)
D.U.T.
Current
monitor
IRFP460
= 25 Ω
R
g
Fig. 8 - Unclamped Inductive Test Circuit
100
L
1000
High-speed
switch
Freewheel
diode
40HFL40S02
10 000
+
V
d
= 25 V
Note
(1)
Formula used: TC = TJ - (Pd + Pd
Pd = Forward power loss = I
Pd
= Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated V
REV
F(AV)
) x R
REV
x VFM at (I
thJC
;
F(AV)
/D) (see fig. 6);
R
www.vishay.com For technical questions, contact: ind-modules@vishay.com
Document Number: 94153
4 Revision: 28-Apr-08
200CNQ045PbF
Schottky Rectifier, 200 A
Vishay High Power Products
ORDERING INFORMATION TABLE
Device code
Dimensions http://www.vishay.com/doc?95021
20 0 C N Q 045 PbF
51324
67
1 - Average current rating (x 10)
2 - Product silicon identification
3 - C = Circuit configuration
4 - N = Not isolated
5 - Q = Schottky rectifier diode
6 - Voltage rating (045 = 45 V)
7 - Lead (Pb)-free
LINKS TO RELATED DOCUMENTS
Document Number: 94153 For technical questions, contact: ind-modules@vishay.com
Revision: 28-Apr-08 5
www.vishay.com
DIMENSIONS in millimeters (inches)
3
2
3
1
Ø 5.2 (Ø 0.20)
9.6 (0.37) MIN.
93 (3.66) MAX.
¼" - 20 UNC
80 (3.15)
13 (0.51)
35 (1.37) REF.
7 (0.27)
6 (0.23)
17.5 (0.69)
16.5 (0.65)
21 (0.82)
20 (0.78)
Ø 7.2 (Ø 0.28)
(2 places)
12.6 (0.5)
Outline Dimensions
Vishay Semiconductors
TO-244
Document Number: 95021 For technical questions, contact: indmodules@vishay.com
Revision: 25-Jun-07 1
www.vishay.com
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 www.vishay.com
Revision: 11-Mar-11 1
Loading...